Kramer XE-21X - Manual
Kramer XE-21X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
P/N: 2900-000915
Your XE-21X
2x1 UXGA Switcher
Congratulations on purchasing your
XE-21X
, which is intended for any presentation system
requiring simple two-way switching where a passive “hard-wired” signal path is preferred.
Your
XE-21X
is a mechanical, passive
2x1 UXGA Switcher
for computer graphics video
signals (VGA to UXGA and higher). The
XE-21X
switches either of two signals to a single
output (2 inputs, 1 output). It can also be used a 1x2 switcher (1 input, 2 outputs).
Connecting the XE-21X
2x1 UXGA Switcher
To setup your
XE-21X
, connect:
1. Up to two computer graphics sources (for example, computers) to the input HD15F
connectors.
2. The output HD15F connector to an acceptor (for example, a display).
Note:
Use good quality connection cables to avoid interference, deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables) and position your product away from moisture, excessive sunlight and dust.
Caution
– No operator-serviceable parts inside unit.
For assistance, contact your dealer. Product Warranty is for one year.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
