Kramer T5F-13 - Manual
Kramer T5F-13 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
The Kramer T5F-13 Inner Frame
Congratulations on purchasing your Kramer
T5F-13
inner frame for the
TBUS-5xl
Table
Connection bus.
The
T5F-13
inner frame
includes:
•
An opening for 1 power socket
•
1 cable pass-through insert
•
2 blank inserts
Figure 1: T5F-13 Inner Frame (P/N: 80-004099)
Power Socket and Power Cord Options
Various power sockets and power cords are available to use with the
T5F-13
, as described in
the “TBUS Modular Power Socket Installation and Power Cord” Installation Instructions,
supplied with the power socket.
i
Each power socket comes with detailed assembly instructions.
The T-2INSERT Kit Option (80-00006699)
You can install the
T-2INSERT
kit (which includes 1 pass-through insert and a blank insert)
instead of a power socket.
Mounting the Inserts
i
Go tuser manuals and the complete list of Kramer wall plates and
module connectors.
You can rearrange or remove any of the plates mounted on the inner frame and replace them
with Kramer passive wall plates or connector modules for interfacing A/V type signals.
To mount a Kramer insert or connector module:
1. Unscrew the two screws that fasten the blank plate to the inner frame and remove the
blank plate.
2. Place the required Kramer insert over the opening, insert the two screws to fix the
Kramer insert in place, and tighten them.
Installing the Assembled Inner Frame
To install the
T5F-13
inner frame:
1. Place the assembled inner frame inside the
TBUS-5xl
enclosure.
2. Set the required height using your fingers to bring the inner frame to the desired
position, screw and tighten it in place using the height adjustment screws supplied with
the inner frame.
Connecting the Cables
When replacing blank inserts with connector inserts (for example, VGA, audio, HDMI and so
on):
1. Insert the cables to their appropriate connectors from underneath.
2. Secure the cables to the tie holes on the
TBUS-5xl
.
Do not secure the cables too tightly or too loosely. Leave a small amount of slack.
After the
TBUS-5xl
is connected to mains power and the proper cables, it is ready for use.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
