Kramer 8IR - Manual
Kramer 8IR – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
The Kramer T-RC-8IR TBUS Mounting Insert Kit for RC-8IR
Congratulations on purchasing your Kramer insert kit for the
RC-8IR
. The
T-RC-8IR
lets you
add the
RC-8IR
to TBUS inner frames that include dual power socket openings. (The
TBUS-1Axl
,
TBUS-10xl
and
TBUS-18xl
).
Figure 1: T-RC-8IR Insert Kit for RC-8IR (P/N: 80-000599)
Note that you can only use the EUROPEAN VERSION of the
RC-8IR
with the
T-RC-8IR
when installing in a TBUS. Other
versions will not fit the
T-RC-8IR
.
Installing the T-RC-8IR Insert Kit for RC-8IR
To install the
T-RC-8IR
insert:
1. Unscrew the two faceplate
attachment screws and remove the
RC-8IR
faceplate.
Figure 2: RC-8IR Faceplate Holes Insert Kit for RC-8IR
2. Place the
T-RC-8IR
over the
RC-8IR
enclosure so that both faceplate holes are aligned
with the faceplate holes on the
RC-8IR
enclosure and the IR IN receiver fits into the IR
IN opening (see
).
3. Insert the faceplate screws through the
T-RC-8IR
and
RC-8IR
enclosure faceplate
holes, and tighten.
Figure 3: T-RC-8IR Installation
!
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
