Page 2 - Contents; Introduction; Figures
Contents i Contents 1 Introduction 1 2 Site-CTRL 1 2.1 Loading the Software 2 2.2 The Room List Tab 3 2.3 The Settings Tab 5 2.3.1 The Event Log Tab 7 2.4 The Site-CTRL Menu 8 3 Web Access 9 3.1 The Main Page 10 3.1.1 The Master Room Controller Page 11 3.1.2 The Auxiliary Controller Page 12 3.1.3 Th...
Page 3 - Tables; Table 1: The Room List Features
KRAMER: SIMPLE CREATIVE TECHNOLOGY Contents ii Tables Table 1: The Room List Features 4 Table 2: The Settings Tab Features 6 Table 3: The Event Log Features 7 Table 4: Site-CTRL Menu 8 Table 5: User and Administrator Available Operations using Web Access 9
Page 4 - Introduction; Web Access
Introduction 1 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent y...
Page 5 - Section; Loading the Software
KRAMER: SIMPLE CREATIVE TECHNOLOGY Site-CTRL 2 The easy-to-use Kramer Site-CTRL consists of three main tabs: Room List, Settings 1 The Room List tab displays the status of the Kramer room controllers in a summarized layout, and lets you identify the room by its IP number, name (for example, Science ...
Page 6 - The Room List Tab; The Room List tab lists the status of the rooms controlled by the; Figure 1: The Room List Tab – for the Administrator
Site-CTRL 3 2.2 The Room List Tab The Room List tab lists the status of the rooms controlled by the Site-CTRL system. Figure 1 and Table 1 define the Room List tab features and functions. Figure 2 shows the Room List tab for the user. Figure 1: The Room List Tab – for the Administrator Figure 2: The...
Page 8 - The Settings Tab; Figure 3; Figure 3: The Settings Tab – for the Administrator
Site-CTRL 5 2.3 The Settings Tab The settings tab is mainly intended for the administrator. The user can only set the language (English or Russian) and check the Write Minor Log Events box. The Settings tab lets you set an e-mail notification in case of a defined event for a certain room or certain ...
Page 9 - Table 2: The Settings Tab Features; Figure 6: The IP List
KRAMER: SIMPLE CREATIVE TECHNOLOGY Site-CTRL 6 Table 2: The Settings Tab Features Features Function General Area Language: select English or Russian (available also for the user) Check to Write Minor Log Events (available also for the user) Handshake Interval [min]: set the communication test rate (...
Page 10 - Figure 9: The Event Log Tab
Site-CTRL 7 2.3.1 The Event Log Tab The Event Log tab lists the controlled room events. The Filter area lets you filter the information displayed. Figure 9 and Table 3 define the Event Log tab: Figure 9: The Event Log Tab Table 3: The Event Log Features Features Function Filter area: Date from/Date ...
Page 11 - The
KRAMER: SIMPLE CREATIVE TECHNOLOGY Site-CTRL 8 2.4 The Site-CTRL Menu The Site-CTRL menu is available only for the Administrator 1 Table 4 . defines the Site-CTRL menu. Table 4: Site-CTRL Menu Menu Item Function New Clears the room list and the settings Open Opens an existing Site-CTRL configuration...
Page 12 - Web Access; Figure 10: Entering the IP Number in the Address Bar; Table 5
Web Access 9 3 Web Access Web Access lets you monitor and control the room and is automatically generated by Kramer K-Config. You can login to Web Access either via the Site-CTRL Room List tab (see Section 2.2 ) or via your Internet browser. To enter Web Access via your Internet browser, make sure t...
Page 14 - The Master Room Controller Page
Web Access 11 3.1.1 The Master Room Controller Page The Master room controller page shows the options available for the Master room controller in use. For example, when using a master room controller which includes an audio amplifier (such as the SV-551 / SV-552 ) you will be able to switch the inpu...
Page 15 - Press the front panel buttons to switch inputs; Other tasks are unavailable for the user; The Administrator can:
KRAMER: SIMPLE CREATIVE TECHNOLOGY Web Access 12 In this example, the User can: • Press the front panel buttons to switch inputs • Adjust the master volume Other tasks are unavailable for the user . The Administrator can: • Press the front panel buttons to switch inputs • Adjust the master volume. •...
Page 16 - The Devices Tab; Figure 17: Web Access Main Page with Connected Ports
Web Access 13 3.1.3 The Devices Tab The Devices tab lets you access the driver commands of a device that is on the list. The device at the top of the list is defined to appear first via the Kramer K-Config software. Figure 16: Web Access Main Page (Admin) The main page lists the Master room controll...
Page 17 - To carry out a driver command, do the following:; Figure 18: Web Access Protocol Commands; The Macro Tab
KRAMER: SIMPLE CREATIVE TECHNOLOGY Web Access 14 To carry out a driver command, do the following: 1. Click a device button to access its driver commands. The following screen appears: Figure 18: Web Access Protocol Commands 2. Click a protocol command button. The serial commands are arranged accordi...
Page 18 - The Scheduled Tasks Tab; Figure 20: Scheduled Tasks Tab as Set in K-Config; To write the scheduled tasks, do the following:
Web Access 15 3.1.5 The Scheduled Tasks Tab The Scheduled Tasks tab lets you set a weekly schedule. The schedule can be configured either via the K-Config software 1 If the schedule was written to the device via K-Config, it will automatically show in the Scheduled Tasks tab: or directly via Web Acc...
Page 19 - The macro is added to the schedule:; Figure 23: Macro Added to the Schedule
KRAMER: SIMPLE CREATIVE TECHNOLOGY Web Access 16 Figure 21: Scheduled Tasks Tab 2. Select the custom trigger (macro) for scheduling, the day of the week and the time, and then click Add: Figure 22: Adding a Macro to the Schedule The macro is added to the schedule: Figure 23: Macro Added to the Sched...
Page 20 - To modify the schedule:; Figure 24: Select a Macro to Modify; The following window appears:; Figure 25: Schedule Changes Window
Web Access 17 To modify the schedule: 1. Click appropriate area: Figure 24: Select a Macro to Modify The following window appears: Figure 25: Schedule Changes Window You can disable the macro, change the time or delete the macro and then click OK.
Page 21 - The Settings Tab
KRAMER: SIMPLE CREATIVE TECHNOLOGY Web Access 18 3.1.6 The Settings Tab The Settings tab lists the configuration data of the Master and Auxiliary devices. The User cannot change any data in this table: Figure 26: Web Access Settings Tab (User) Some of the Administration configuration settings can be...
Page 22 - Setting page will make it; Click Save to accept changes. The following window appears:
Web Access 19 Warning! Changing the IP properties of the device (IP Address, DHCP ON/OFF, Gateway or Subnet Mask) through the Web Access Setting page will make it unavailable on Site-CTRL until the room will be added to the room list (see Section 2.2 ) with its updated IP properties Click Save to ac...
