KoolMore RPR-40SS-3P - User Manual
KoolMore RPR-40SS-3P Refrigerator – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – INSTALLATION/ OPERATION; before plugging the unit in.; CABINET LOCATION GUIDELINES; Install the unit on strong and leveled surfaces; -unit performs more efficiently in a well-ventilated area; Avoid installation in a high humidity and/or dusty area; to higher energy bills and gradual breakdown of the unit; ELECTRICAL
- Page 4 – TEMPERATURE CONTROLS; CAUTION; LOADING PRODUCT
- Page 5 – ATTENTION; Do not use extension cords.; UNPLUG CORD; During maintenance and cleaning, please unplug the unit.; PROPER GROUDING REQUIRED; To minimize personal injury, do not hang on the doors.
- Page 6 – REGULAR MAINTENANCE; CLEANING THE CONDENSER COIL; After cleaning, straighten any bent condenser fins with a fin comb.; CLEANING THE FAN BLADES AND MOTOR; Check door gaskets for proper seal after they are replaced.; WARNING; Disconnect power cord before cleaning any parts of the unit.
COMMERCIAL REFRIGERATOR AND FREEZER
USER’S MANUAL
Refrigerated Pizza Prep Units
Models:
PPTR-1D-14CS,
PPTR-1D-14CL,
PPTR-2D-16CS,
PPTR-2D-16CL,
PPTR-3D-24C
Refrigerated Sandwich Prep Units
Models:
SPTR-1D-6C,
SPTR-2D-8C,
SPTR-2D-10C,
SPTR-2D-15C,
SPTR-3D-16C
SPTR-1D-6C-LT,
SPTR-2D-8C-LT,
SPTR-2D-10C-LT,
SPTR-2D-15C-LT,
SPTR-3D-16C-LT
Undercounter Refrigerators and Freezers
Models:
UCR-1D-6C,
UCR-2D-12C,
UCR-2D-15C,
UCR-3D-16CUCF-1D-6,
UCF-2D-12
RWT-1D-6C,
RWT-2D-12C,
RWT-2D-15C,
RWT-3D-16C, FWT-1D-6C,
FWT-2D-12C
PLEASE READ THE MANUAL THOROUGHLY PRIOR TO
EQUIPMENT SET-UP, OPERATION AND MAINTENANCE.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INSTALLATION/ OPERATION IMPORTANT!!! PLEASE READ BEFORE INSTALLATION ■ If the unit has recently been transported please let unit stand still for a minimum of 24 hours before plugging it in. ■ Make sure that the unit drops down to desired temperature before loading the unit with product. ■ Make sure ...
on the nameplate of the unit. Please make sure that your unit has its own dedicated outlet. Do not use an extension cord. TEMPERATURE CONTROLS The temperature controls are factory-set to maintain an average temperature of 38 F in refrigerators and 0 F in freezers. To maintain a different temperature...
place, even if some pans are to be left empty. For maximum food freshness, fill the pans only with an amount that can be used in a specific usage period. During non-use, please close the insulated lid cover. SAFETY / WARNING Please pay close attention to the safety notices in this section. Disregard...
