Page 2 - Introduction
TWAIN Driver x-1 Introduction Thank you for purchasing this machine. This manual provides the information required to use this machine for scan-ning. Be sure to read this manual before performing any operations. For precautions concerning the use and safety of the machine, refer to the User’s Guide ...
Page 3 - TWAIN Driver; Copyright; Note
TWAIN Driver x-2 Copyright © 2007 Konica Minolta Business Technologies, Inc. All Rights Reserved. Note - This User’s Guide may not be reproduced in part or in full without permis-sion. - Konica Minolta Business Technologies, Inc. will not be held liable for any incidents caused by using this User’s ...
Page 4 - Software End User License Agreement; COPYRIGHT AND INTELLECTUAL PROPERTY RIGHTS
TWAIN Driver x-3 Software End User License Agreement PLEASE READ CAREFULLY THE LICENSE AGREEMENT BELOW BEFORE OPENING THE PACKAGE OF THIS SOFTWARE (“SOFTWARE”), DOWN-LOADING, INSTALLING OR USING THE SOFTWARE. OPENING THE PACK-AGE, OR DOWNLOADING, INSTALLING OR USING THE SOFTWARE SHALL BE DEEMED YOUR...
Page 7 - Contents
TWAIN Driver x-6 Contents Introduction Copyright ........................................................................................ x-2 Software End User License Agreement .......................................... x-3 Contents .....................................................................
Page 8 - Driver settings
TWAIN Driver x-7 4 Driver settings 4.1 TWAIN scanner driver ....................................................................... 4-1 Document Size ............................................................................... 4-2Scan Mode ............................................................
Page 9 - Explanation of manual conventions
Page 10 - Setting up for scanning; Reminder
Setting up for scanning 1 TWAIN Driver 1-1 1 Setting up for scanning If the enclosed TWAIN driver is installed on the computer, this machine can be used to scan a document and send it to the computer. For scanning, an environment that includes the following software and hard-ware is required. 2 Remi...
Page 12 - Installing the TWAIN driver; Making connections and installing the driver; Connecting to a computer; Connecting to a USB port
Installing the TWAIN driver 2 TWAIN Driver 2-1 2 Installing the TWAIN driver This chapter provides descriptions on connecting the machine to a computer and installing the TWAIN driver. 2.1 Making connections and installing the driver Connecting to a computer This machine can be connected to a comput...
Page 13 - Connecting to the network; Procedures for making connections and installing the driver
Installing the TWAIN driver 2 TWAIN Driver 2-2 Connecting to the network In order to perform TWAIN scanning on a network, the optional network in-terface card NC-503 or image controller IC-206 must be installed. For details on connecting this machine to the network, refer to “Installing the TWAIN dr...
Page 15 - General operation for driver installation; Installation using Plug and Play
Installing the TWAIN driver 2 TWAIN Driver 2-4 2.2 General operation for driver installation The driver is installed according to the following general operation. Installation using Plug and Play When installing the driver by using Plug and Play, the installation procedure differs depending on the o...
Page 16 - Installing the TWAIN driver by using Plug and Play; Connecting to the computer’s USB port; Turn on this machine.
Installing the TWAIN driver 2 TWAIN Driver 2-5 2.3 Installing the TWAIN driver by using Plug and Play Connecting to the computer’s USB port When this machine is connected to a computer with a USB cable, Plug and Play detects the device, and then installation of the necessary drivers begins. 1 Start ...
Page 17 - The folder can be selected after clicking the [Browse] button.
Installing the TWAIN driver 2 TWAIN Driver 2-6 2 Note With Windows XP, Server 2003, Vista and 2000, log on as a user with Ad-ministrator privileges to install the driver. Installing using Plug and Play on Windows XP/Server 2003 2 Note If the driver is installed using Plug and Play, first the TWAIN d...
Page 18 - Installing using Plug and Play on Windows Vista
Installing the TWAIN driver 2 TWAIN Driver 2-7 4 When the Completed Found New Hardware Wizard dialog box ap-pears, click the [Finish] button. This completes the installation of the TWAIN driver.The Found New Hardware Wizard appears again, and the installation of the printer driver begins. 5 Repeat s...
Page 20 - Installing using Plug and Play on Windows 2000
Installing the TWAIN driver 2 TWAIN Driver 2-9 Installing using Plug and Play on Windows 2000 2 Note If the driver is installed using Plug and Play, first the TWAIN driver is in-stalled, and then installation of the printer driver begins. The procedure described in this manual is for the installatio...
Page 21 - Installing using Plug and Play on Windows Me
Installing the TWAIN driver 2 TWAIN Driver 2-10 Installing using Plug and Play on Windows Me 2 Note If the driver is installed using Plug and Play, first the TWAIN driver is in-stalled, then the USB printing support driver is installed, and then instal-lation of the printer driver begins. The proced...
Page 23 - Installing the TWAIN driver by using the installer; Use the network cable to connect this machine to the computer.
Installing the TWAIN driver 2 TWAIN Driver 2-12 2.4 Installing the TWAIN driver by using the installer If the machine is to be used through a network connection, install the TWAIN driver by using the installer. 2 Reminder The optional network interface card NC-503 or image controller IC-206 must be ...
Page 26 - Reinstalling the TWAIN driver by using the installer; The installer starts up.
Installing the TWAIN driver 2 TWAIN Driver 2-15 2.5 Reinstalling the TWAIN driver by using the installer The following procedure describes how to reinstall the TWAIN driver by using the installer. 1 Insert the CD-ROM containing the TWAIN installer into the CD-ROM/DVD drive of the computer. 2 Open My...
Page 28 - Uninstalling the TWAIN driver
Installing the TWAIN driver 2 TWAIN Driver 2-17 2.6 Uninstalling the TWAIN driver The TWAIN driver can be uninstalled by deleting the driver with System Prop-erties from Control Panel or by using the installer. 2 Note If the machine is to be used through a network, use the installer to unin-stall th...
Page 29 - Deleting the TWAIN driver by using the installer; Use the installer to delete the TWAIN driver.
Installing the TWAIN driver 2 TWAIN Driver 2-18 Deleting the TWAIN driver by using the installer Use the installer to delete the TWAIN driver. 1 Start Windows, and then insert the CD-ROM containing the TWAIN driver installer into the computer’s CD-ROM/DVD drive. 2 Double-click the installer icon. 3 ...
Page 32 - Scanning a document; Using the automatic document feeder; Point to “Create PDF”, and then click “From Scanner”.
Scanning a document 3 TWAIN Driver 3-1 3 Scanning a document The document can be scanned using either the automatic document feeder or the original glass. 3.1 Using the automatic document feeder Use the automatic document feeder to continuously scan multiple docu-ments. 2 Note Automatic document fee...
Page 34 - Using the original glass; Use the original glass when scanning a book.
Scanning a document 3 TWAIN Driver 3-3 3.2 Using the original glass Use the original glass when scanning a book. 1 Start the application (imaging software, Adobe Photoshop, etc.) on the computer. – As an example, the procedure using Adobe Acrobat 6.0 Profession-al is described below. 2 Click “File”....
Page 36 - TWAIN scanner driver
Driver settings 4 TWAIN Driver 4-1 4 Driver settings 4.1 TWAIN scanner driver No. Item Settings 1 Document Size A3L, B4L, A4L, B5L, A5L, FLS 8 1/4 * 13 in, FLS 8 1/2 * 13 in, FLS 220 * 330 mm, FLS 8 1/8 * 13 1/4 in, FLS 8 * 13 in, A4C, B5C, A5C, Ledger L, 11 x 14 L, Legal L, Letter L, Invoice L, Let...
Page 37 - Document Size
Driver settings 4 TWAIN Driver 4-2 Document Size From the drop-down list, select a document size to specify the size of the document to be scanned. 2 Note If the scanned image is larger than the specified document size selected in the Document Size drop-down list, any part of the scanned image larg-...
Page 38 - Scan Mode; Two settings are available in the “Scan Mode” drop-down list.; Resolution
Driver settings 4 TWAIN Driver 4-3 Scan Mode Two settings are available in the “Scan Mode” drop-down list. - Text: Select this setting for normal documents. - Photo: Select this setting for photos. Resolution Three settings are available in the “Resolution” drop-down list. Select the setting appropr...
Page 39 - Scan Type; Select “OFF” or “ON” from the drop-down list.
Driver settings 4 TWAIN Driver 4-4 Scan Type From the “Scan Type” drop-down list, select either “Push Scan” or “Pull Scan”. - Pull Scan: With this scanning method, clicking the [Scan] button in the driver starts scanning. - Push Scan: With this scanning method, pressing the [Start] key on the machin...
Page 40 - Brightness; The brightness of colors can be adjusted. The default setting is “0”.
Driver settings 4 TWAIN Driver 4-5 Brightness The brightness of colors can be adjusted. The default setting is “0”. The brightness can be set between -4 (darker) and 4 (brighter). I/O Type The I/O Type dialog box appears. A USB connection or a network connection can be selected. - If a network conne...
Page 42 - Error messages; Paper misfeeds; Control panel message:
Error messages 5 TWAIN Driver 5-1 5 Error messages 5.1 Paper misfeeds Control panel message: Computer display message: Cause Remedy A paper misfeed occurred in the automatic document feeder or reverse automatic docu-ment feeder. Open the misfeed-clearing cover and the automatic document feeder, and ...
Page 43 - Clearing a misfeed in the automatic document feeder; Remove all document pages from the document feed tray.
Error messages 5 TWAIN Driver 5-2 Clearing a misfeed in the automatic document feeder 1 Open the misfeed-clearing cover. 2 Remove all document pages from the document feed tray.
Page 46 - Transmission error; Computer display message:
Error messages 5 TWAIN Driver 5-5 Transmission error Computer display message: 2 Note The network cable can be used only when the optional network interface card NC-503 or image controller IC-206 is installed. Scanning Computer display message: Cause Remedy The machine has not started up. • Turn off...
Page 47 - Scanning error
Error messages 5 TWAIN Driver 5-6 Scanning error Computer display message: 2 Note The network cable can be used only when the optional network interface card NC-503 or image controller IC-206 is installed. Automatic document feed no paper Computer display message: Cause Remedy An error occurred whil...
Page 48 - Other machine errors
Error messages 5 TWAIN Driver 5-7 Other machine errors Computer display message: 2 Note The network cable can be used only when the optional network interface card NC-503 or image controller IC-206 is installed. Cause Remedy The automatic document feeder or the mis-feed-clearing cover is open while ...
