Page 2 - Acknowledgments
© 1999 by Konica Business Technolog ies, Inc. Acknowledgments All brands and product names are trademarks or register ed trademar ks of their respective companies. PostScript ®A register ed trademark of Adobe Systems, Inc. Agfa Intellifont® Scalable TypefacesA registered trademark from Agfa Corpor a...
Page 3 - e l c o m e t o K o n i c a' s n e w p r i n t c o n t r o l l e r.; main body, enabling you to print directly from y our workstation.
iii e l c o m e t o K o n i c a' s n e w p r i n t c o n t r o l l e r. This new print controller is an image processing device that interfaces with your Konica pr inter main body, enabling you to print directly from y our workstation. Use this equipment according to instructions in this manual, w h...
Page 4 - Definition of Terms; The image resolution of the printer engine.; E-RDH - Electronic Recirculating Document Handler; Refers to the Input and Output channels of the system.; PCL - Printer Control Language
iv Definition of Terms DPI - Dots Per Inch The image resolution of the printer engine. Double-Buffering The embedded print controller is designed with an asynchronous connection between its Main CPU and theprint engine. This allows the main CPU to rasterize pages into memory even when the print engi...
Page 6 - NONEXCLUSIVE LICENSE AGREEMENT (continued)
vi NONEXCLUSIVE LICENSE AGREEMENT (continued) 6. L IMITED W ARRANTY . Licensor warrants, for your benefit alone, for a period of 90 days from the date of commencement of this License Agreement (referred to as the “Warranty Period”) that the Software and Printer Drivers shall operate substantially in...
Page 7 - FCC Regulations
vii Konica IP-411 FCC Regulations The Konica IP-411 gener ates, uses, and can radiate radio frequenc y energ y. If the equipment is not installed and used inaccordance with the instruction manual, interference with radio communica tions may result. This equipment has been tested andfound to comply w...
Page 9 - Contents; Section 1: The Print Controller
Contents Welcome to Konica's New Printer Controller .............................................................................. iiiDefinition of Terms ....................................................................................................................... iv Section 1: The Print Co...
Page 11 - The Print Controller; Introduction; Basically, print controller language detection works as follows:
The Print Controller 1-2 The Print Controller Introduction The print controller interfaces directly with your Konica pr inter main body, enabling you to pr int directlyfrom your PC or network. Please note tha t the network interface manual is provided separately for thenetwork administrator.. This p...
Page 12 - System Configuration; Default Settings; Other Settings
The Print Controller 1-3 The Print Controller System Configuration The Konica IP-411 Print Controller is an embedded control board for the Konica 7040/7033 Copier engineand is based on an IBM compatible PC architectur e that includes the following: Intel Pentium 233 MMX CPUPCI bus interface to 7040/...
Page 13 - Media Support; Letter; Special Media
The Print Controller 1-4 The Print Controller Media Support The Print Controller supports the following paper dimensions and orientations through the pr inter's mainbody. USA (inches) Tabloid-R (11 x 17) Legal-R (8.5 x 14) Letter-R (8.5 x 11) Letter (11 x 8.5) Half-Letter-R (5.5 x 8.5) A4 (297 x 210...
Page 14 - Layout; Main Body Eng ine Rear View
The Print Controller 1-5 The Print Controller Layout KN-302 RJ-45 & LEDs Main Body Eng ine Rear View Parallel Port Connector
Page 15 - Network
The Print Controller 1-6 The Print Controller I/O Interfaces V PostScriptInterpreter Network Interface Card ControllerInterface ParallelPort PCL 5EInterpreter Input Buffer V V Server Mac PC -------Ethernet-------- PC or PrintServer KN-302 PCIBus 7040 Engine Interface Print Controllerplus Memory
Page 16 - Print Mode; Text; Memory Upgrade Modules; Memory Configuration
The Print Controller 1-7 Most of the print controller memory is used for rasterizing the image. A small portion (~2.7 MB) is usedfor the system operation. The basic print controller configuration includes 32 MB of RAM. Even with 16 MB, 1-bit mode printing at400 dpi is available on all paper sizes. B...
Page 17 - Specifications
The Print Controller 1-8 The Print Controller Specifications SystemArchitecture IBM Compatible PC System Processor 233 MHz Intel Pentium MMX Memory 32 MB standard - MU10564 MB - MU301128 MB - MU302 Hard Drive IDE Compatible - Laptop HD-104IDE Flash 8 MB Input/Output InterfacesParallel IEEE 1284 comp...
Page 18 - Section 2: Printer Drivers
Page 19 - Printer Drivers; Installing Printer Drivers; The printer name will appear in the list of installed printers.
2-2 Printer Drivers Printer Drivers Installing Printer Drivers Windows 3.x The Printer Drivers that come with the IP-411 Print Controller are actually software programs that enableyou to control all the printing settings for the selected printer. Before you can print from your application (e.g., spr...
Page 20 - Assigning a Port
Printer Drivers 2-3 Printer Drivers Installing Printer Drivers Windows 3.x Assigning a Port By default, LPT1 will be assigned to the newly installed printer. 1. To assign a different port, click on the Connect button. 2. In the Ports list, select the port you want to assign to the printer. NOTE: Whe...
Page 21 - Checking the Version of A Printer Driver; Highlight the driver in the Printers dialog box.
2-4 Printer Drivers Printer Drivers Checking the Version of A Printer Driver Windows 3.x There may be times when you need to know if you are using the most up-to-date printer driver. Use thefollowing procedure to check the version of a printer driver. 1. Highlight the driver in the Printers dialog b...
Page 22 - Printing Modes; Output Quality
Printer Drivers 2-5 Printer Drivers Printing Modes Output Quality High Mode (PostScript)High Mode produces 256-level grayscale printing with 8 bits per pixel. Text Mode (PCL/PostScript)Text Mode performs normal quality 2-level grayscale printing. Normal/Reverse Print Order Some applications have a R...
Page 23 - Real Time Mode Print; Normal
2-6 Printer Drivers Printer Drivers Printing Modes Real Time Mode Print The print controller performs page printing and starts printing as soon as it starts receiving a print job. Thisis different from document printing, w here a printer starts printing only after receiving the entire print job. Dua...
Page 24 - Tray Selection/Paper Selection; When Paper Size is Not Specified; When the print job specifies a tray, one of the following occurs:; Auto Tray Selection Mode
Printer Drivers 2-7 Printer Drivers Tray Selection/Paper Selection The system selects the paper size and paper tray in the manner specified below. When Paper Size is Not Specified ? When a print job does not specify paper size, the default paper size will be used. When a Paper Tray is Specified ? Wh...
Page 25 - Font Selection
2-8 Printer Drivers Printer Drivers Font Selection Standard fonts of the PostScript and PCL 5e languages are displayed on the f ollowing pages. ThePostScript fonts shown are the visual equivalent of the Adobe fonts with the same names. A PostScr ipt compatible file system is provided for storing dow...
Page 26 - Font Characteristics; Fixed Spacing Courier 10; as in Helvetica Bold
Printer Drivers 2-9 Printer Drivers Font Characteristics A font is described by its Symbol Set and font characteristics, such as, Typeface, Point Size, Pitch, Spacing,Stroke Weight and Style. Symbol Set: A Symbol Set relates to the unique set of all available alphanumeric, punctua tion, and specials...
Page 27 - PostScript Printer Language Fonts; The following fonts are the visual equivalent of Adobe font names.; Helvetica-BoldOblique; NewCenturySchlbk-BoldItalic
2-10 Printer Drivers Printer Drivers PostScript Printer Language Fonts The following fonts are the visual equivalent of Adobe font names. AvantGarde-Book ABCDEFGHIJ1234567890 AvantGarde-BookOblique ABCDEFGHIJ1234567890 AvantGarde-Demi ABCDEFGHIJ1234567890 AvantGarde-DemiOblique ABCDEFGHIJ1234567890 ...
Page 28 - PCL Printer Language Fonts
Printer Drivers 2-11 Printer Drivers PCL Printer Language Fonts The interpreter for the PCL langua ge interprets the following fonts for a PCL print job. (Continued)
Page 30 - Section 3: Printer Driver Screens
Page 31 - Printer Driver Screens; Overview; Windows 95 PCL
3-2 Printer Driver Screens Printer Driver Screens Overview This section shows the various printer driver screens you will encounter when making printing selections,depending the printer driver installed. Samples include PostScript and PCL printer driver screens forWindows 3.1; and PostScript and PCL...
Page 32 - PostScript Driver Screens for Windows 3.1
Page 35 - The Advanced Options screen allows you to select the following:
3-6 Printer Driver Screens Printer Driver Screens PostScript Driver Screens for Windows 3.1 Advanced Options The Advanced Options screen allows you to select the following: FontsYou may change the default font currently in use by clic king the arrow in the [S end to Printer as: ] field todisplay the...
Page 36 - Highlight the Offset feature.
Printer Driver Screens 3-7 Printer Driver Screens PostScript Driver Screens for Windows 3.1 Offset Mode From the Options screen, use the arrow under Printer features to scroll through the list of available options. When printing m ultiple sets you may select the Offset mode to keep the sets separate...
Page 37 - Highlight the Staple feature.
3-8 Printer Driver Screens Printer Driver Screens PostScript Driver Screens for Windows 3.1 Staple Mode From the Options screen, use the arrow under Printer features to scroll through the list of available options. When printing multiple sets you may select the Staple mode to staple each set. 1 High...
Page 38 - Highlight Print Quality to display the current setting.
Printer Driver Screens 3-9 Printer Driver Screens PostScript Driver Screens for Windows 3.1 Print Quality From the Options screen, use the arrow under Printer features to scroll through the list of available options. When your document includes graphic or halftone images that require a higher resolu...
Page 39 - Toner Saver mode reduces the amount of toner nor mally used by 20%.
3-10 Printer Driver Screens Printer Driver Screens PostScript Driver Screens for Windows 3.1 Print Density Print Density allows you to reduce toner consumption by using the Toner Saver mode or Draft mode. 1 From the Options screen, use the arrow under Printer features to scroll through the list of a...
Page 40 - The Print screen indicates the current setting for paper size.
Printer Driver Screens 3-11 Printer Driver Screens PostScript Driver Screens for Windows 3.1 Paper Size The Print screen indicates the current setting for paper size. 1 Use the Paper Size arrow to scroll through the list of options if you wish to select another paper size. 2 Double click on your sel...
Page 41 - Double click the desired Resolution, then click OK.
3-12 Printer Driver Screens Printer Driver Screens PostScript Driver Screens for Windows 3.1 Resolution The Advanced Options screen indicates the current ad vanced settings and the default Resolution setting of400 dpi. 1 To change the Resolution setting, click on the arrow to display the options. 2 ...
Page 42 - To leave the setting unchanged, click Cancel.
Printer Driver Screens 3-13 Printer Driver Screens PostScript Driver Screens for Windows 3.1 Edge Smoothing Edge SmoothingThe default setting is Off. When Edge Smoothing is turned On, edges of text or objects are filled in withextra toner and feathered edges are closed to enhance the image. 1 From t...
Page 43 - When the correct setting is indicated, click OK.
3-14 Printer Driver Screens Printer Driver Screens PostScript Driver Screens for Windows 3.1 Output Bin Output Bin1. From the Options screen, use the arrow under Printer features to scroll through the list of availableoptions. 2 Click on the Output Bin feature.Output Bin describes which area of the ...
Page 44 - When the correct setting is indicated, click OK.
Printer Driver Screens 3-15 Printer Driver Screens PostScript Driver Screens for Windows 3.1 Output Order 1 From the Options screen, use the arrow under Printer features to scroll through the list of availableoptions. 2 Click on the Output Order f eatur e to display the current setting in Setting fo...
Page 45 - PCL Driver Screens for Windows 3.1
Page 47 - To leave the settings unchanged, click Cancel.
3-18 Printer Driver Screens Printer Driver Screens PCL Driver Screens for Windows 3.1 Print Setup View Current Printer SettingsWhen Setup is selected from the Print screen (see previous page), the Print Setup screen displays the currentsettings. The current settings indicate that the Konica 7040 pri...
Page 49 - Paper Tray Source
3-20 Printer Driver Screens Printer Driver Screens PCL Driver Screens for Windows 3.1 Print Setup Paper Tray Source Using Auto SelectAuto Select is the default mode for paper tray Source, w hich means the pr inter will automatically locate thetray containing the selected paper size without your inte...
Page 52 - When all settings changes are made, click OK.
Printer Driver Screens 3-23 Printer Driver Screens PCL Driver Screens for Windows 3.1 Edit Watermark Edit WatermarkThe Edit screen allows you to change the Font, Size, Style and Color of the highlighted text.Other settings allow y ou to adjust the Saturation and Intensity of the color. You may also ...
Page 55 - When the selection you w ant is indicated, click OK.
3-26 Printer Driver Screens Printer Driver Screens PCL Driver Screens for Windows 3.1 Font Substitutions Table Font Substitutions TableWhen you click Edit the Table on the previous screen, a list of True Type fonts displa ys on the screen alongwith the printer's method of using each font. The [Print...
Page 57 - To view or c hange Duplex Mode settings, see next page.
3-28 Printer Driver Screens Printer Driver Screens PCL Driver Screens for Windows 3.1 Job Tab Job SettingsThe current J ob settings indicate that the Duplex Mode, Wait Mode and Special Modes are Off. To view or change these settings, clic k the arrow next to the setting to display option settings, t...
Page 60 - To leave the settings unchanged, click cancel.
Printer Driver Screens 3-31 Printer Driver Screens PCL Driver Screens for Windows 3.1 Job - Special Modes Special ModesFrom the Job tab scr een, click the arrow next to the Special Modes field to display the Special Modesoptions. Select 2-in-1 to print two pages (images) on one standard sheet, or, s...
Page 61 - Options for the Front Cover mode are shown on the next page.
3-32 Printer Driver Screens Printer Driver Screens PCL Driver Screens for Windows 3.1 Covers Tab Front and Back CoversThe Covers ta b displays the above scr een that shows the default settings for Front Cover, Front Cover Tray,Back Cover mode and Back Cover Tray. To view or change these settings, cl...
Page 63 - To leave the settings unchanged, click on Cancel.
Printer Driver Screens PCL Driver Screens for Windows 3.1 Covers Front Cover TrayClick on the arrow next to the Front Cover Tray field to view tray options. Highlight the tray you want to use for the Front Covers, then click OK. In this example, Tray 1 is selected. If you are using colored or prepri...
Page 67 - Select the Toner Save mode to use only 80% of the toner normally used.
3-38 Printer Driver Screens Printer Driver Screens PCL Driver Screens for Windows 3.1 Media Settings Print Density1. Click the arrow next to the Print Density setting to display density options. • Select the Toner Save mode to use only 80% of the toner normally used. • Select Draft mode to use only ...
Page 73 - PostScript Driver Screens for Windows 95
Page 74 - The following pages show the scr eens for each tab selection.
3-44 Printer Driver Screens Printer Driver Screens PostScript Driver Screens for Windows 95 General Tab General ScreenThe General tab brings you to the above basic screen tha t identifies the name of your printing device . Click on Browse to review your printing envir onment and get questions answer...
Page 78 - Highlight the font substitution you w ant, then click OK.
3-48 Printer Driver Screens Printer Driver Screens PostScript Driver Screens for Windows 95 Font Substitutions Table Font Substitutions TableThe Font Substitutions Table displays w hen you select Edit the Table from the Fonts screen shown on theprevious page. This Table lets y ou specify host fonts ...
Page 79 - When the port setting you require is indica ted, click OK.
Printer Driver Screens 3-49 Printer Driver Screens PostScript Driver Screens for Windows 95 Details Tab - Printer Port Printer PortThe Details tab displays a screen indicating the current print port setting. The default setting is LPT1. 1 Click on the ar row next to the current setting to display th...
Page 80 - Highlight the desired printer port setting, then click OK.
3-50 Printer Driver Screens Printer Driver Screens PostScript Driver Screens for Windows 95 Details Tab - Printer Port Printer Port Setting OptionsThe default printer port setting is LPT1. 1 Click the arrow next to the current setting to display port options. 2 Highlight the desired printer port set...
Page 82 - To exit from the screen without making changes, click Cancel.
3-52 Printer Driver Screens Printer Driver Screens PostScript Driver Screens for Windows 95 Device Options Tab Device OptionsThe Device Options screen displays the current settings for Printer featur es and Installable options. 1 To view setting options, click the arrow next to Printer features or I...
Page 83 - Select High mode to print image that r equires finer resolution.
Printer Driver Screens 3-53 Printer Driver Screens PostScript Driver Screens for Windows 95 Device Options Tab Printer Features - Print QualityThe default setting f or Print Quality is Text. To change the default setting: 1 Use the arrow in the [Chang e setting for: Print Quality] field to view opti...
Page 85 - Toner Save uses 80% of the toner amount used in Normal mode.
Printer Driver Screens 3-55 Printer Driver Screens PostScript Driver Screens for Windows 95 Device Options Tab Printer Features - Print DensityThe default setting f or Print Density is Normal. To change the default setting: 1 Use the arrow in the [Change setting for: Print Density] field to view opt...
Page 89 - To leave the setting unchanged and exit the scr een, clic k Cancel.
Printer Driver Screens 3-59 Printer Driver Screens PostScript Driver Screens for Windows 95 Device Options Tab Printer Features - StaplingThe default setting f or Stapling is Off. To change the default setting: 1 Use the arrow in the [ Change setting for: Stapling] field to view options.2 Highlight ...
Page 95 - Use Face Down to output the job face down and in proper or der.
Printer Driver Screens 3-65 Printer Driver Screens PostScript Driver Screens for Windows 95 Device Options Tab Printer Features - Output OrderThe default setting f or Output Order is Face Down. To change the default setting: 1 Use the arrow in the [Chang e setting for: Output Order] field to view op...
Page 99 - The default Paper Size setting is Letter.
Printer Driver Screens 3-69 Printer Driver Screens PostScript Driver Screens for Windows 95 Paper Tab Paper SizeWhen you click the Paper tab, the a bove screen displays the current settings for Paper Size, Layout,Orientation, Paper Source, and a setting for the n umber of Copies. The default Paper S...
Page 100 - Note: Trays indicated by
3-70 Printer Driver Screens Printer Driver Screens PostScript Driver Screens for Windows 95 Paper Tab Paper SourceThe default setting f or Paper Source is AutoSelect Tray, which means the printer will use the appropriatetray for the selected paper size. I you wish to leave the cur rent setting uncha...
Page 102 - The default setting f or Output bin is the Middle Bin.
3-72 Printer Driver Screens Printer Driver Screens PostScript Driver Screens for Windows 95 Paper Tab More Options Screen - Output binClick on the More Options button to display current settings for Paper type and Output bin. The default setting f or Output bin is the Middle Bin. 1 Click on the ar r...
Page 103 - Be sure the paper you select is loaded in the appropriate tray.
Printer Driver Screens 3-73 More Options Screen - Paper typeThe above scr een indicates the cur rent setting for Paper type. The default setting is Plain Paper. 1 Click the ar row next to the current Paper type setting to view other options.2 Highlight the desired paper type setting, then click OK. ...
Page 104 - When all settings are as desired, click OK.
3-74 Printer Driver Screens Printer Driver Screens PostScript Driver Screens for Windows 95 PostScript Tab PostScript Output Format1 Click the PostScript tab to display the PostScript settings screen shown a bove. The sample screen shows the PostScr ipt Output format setting is Postscript [optimize ...
Page 107 - PCL Driver Screens for Windows 95
Page 112 - To leave the Auto Select tray setting unchanged, click Cancel.
3-82 Printer Drivers Printer Driver Screens PCL Driver Screens for Windows 95 Setup Screen Paper Tray SettingThe default setting f or Paper Tray is Auto Select, w hich enables the printer to automa tically select anappropriate tray for the pa per type you select. If desired, you may turn off Auto Se...
Page 114 - To leave settings unchanged, click Cancel
3-84 Printer Drivers Printer Driver Screens PCL Driver Screens for Windows 95 Watermarks Selecting a WatermarkClick on the Watermar ks tab to display the screen shown a bove. From this screen, you may Select, Edit,Add, or Delete a Water mark. To Select a Water mark, highlight it, then c lick OK.To E...
Page 121 - To leave the Duplex Mode setting unc hanged, clic k Cancel.
Printer Drivers 3-91 Printer Driver Screens PCL Driver Screens for Windows 95 Duplex Mode Duplex Mode1 Click the Duplex Mode arrow to view setting options. • Select Short Edge Binding to bind the document along the short edge for landscape orientation. • Select Long Edge Binding to bind the document...
Page 122 - To leave the Wait Mode setting unchanged, click Cancel.
3-92 Printer Drivers Printer Driver Screens PCL Driver Screens for Windows 95 Wait Mode Wait Mode1 Click the Wait Mode arrow to view setting options. • Select Wait On to be prompted to install special paper, such as OHP, Thin stock or Thick stoc kbefore printing. • Select Wait with Pr oof to be prom...
Page 123 - Select Booklet to print four pages (images) on one standard sheet.
Printer Drivers 3-93 Printer Driver Screens PCL Driver Screens for Windows 95 Special Modes Special Modes1 Click the Special Modes arrow to view setting options. • Select 2-in-1 to print two pages (images) on one standard sheet. • Select Booklet to print four pages (images) on one standard sheet. 2 ...
Page 124 - To leave Cover settings unchanged, click Cancel.
3-94 Printer Drivers Printer Driver Screens PCL Driver Screens for Windows 95 Covers Tab Covers Setting ScreenThe Covers ta b displays the above scr een that shows the default settings for Front Cover, Front Cover Tray,Back Cover mode and Back Cover Tray. To view or change these settings, clic k the...
Page 125 - When the desired setting is indicated, click OK.
Printer Drivers 3-95 Printer Driver Screens PCL Driver Screens for Windows 95 Front Covers Front Cover ModeThe Front Cover mode is Off by default. To change this setting: 1 Click the arrow next to the Front Cover field to view option settings. • Select Printed to print on the Front Cover sheets bef ...
Page 127 - Click the arrow next to the Back Cover field to view options.
Printer Drivers 3-97 Printer Driver Screens PCL Driver Screens for Windows 95 Back Covers Back Cover ModeThe Back Cover mode is Off by default. To change this setting: 1 Click the arrow next to the Back Cover field to view options. • Select Printed to print on the Back Cover sheets before inserting ...
Page 128 - To leave the Back Cover Tray setting unchanged, click Cancel.
3-98 Printer Drivers Printer Driver Screens PCL Driver Screens for Windows 95 Back Covers Back Cover TrayThe Back Cover Tray is set at None by default. To change this setting: 1 Click the arrow next to the Back Cover Tray field to view tray options.2 Highlight the tray you want to use for the Back C...
Page 129 - To leave the Media settings unchanged, click Cancel.
Printer Drivers 3-99 Printer Driver Screens PCL Driver Screens for Windows 95 Media Tab Media Settings ScreenWhen you click on the Media tab, current settings are displayed for Print Density and Media Type. This screen shows that Normal is selected for Print Density and Plain Paper is selected for M...
Page 130 - Click the arrow in the Print Density field to view options.
3-100 Printer Drivers Printer Driver Screens PCL Driver Screens for Windows 95 Media Print DensityThe default setting for Print Density is Normal. To change this setting: 1 Click the arrow in the Print Density field to view options. • Select the Toner Save mode to use only 80% of the toner normally ...
Page 131 - To leave the Media Type setting unchanged, click Cancel.
Printer Drivers 3-101 Printer Driver Screens PCL Driver Screens for Windows 95 Media Media TypeThe default setting for Media Type is Plain Paper. To change this setting: 1 Click on the arrow in the Media Type field to view options (OHP Transparency, Thin or Thick Paper).2 Highlight the desired Media...
Page 132 - To leave the Finishing Settings unchanged, click Cancel.
3-102 Printer Drivers Printer Driver Screens PCL Driver Screens for Windows 95 Finishing Tab Finishing Settings ScreenThe Finishing screen shows the default settings for Collate, Stapling and Output Bin. Click the arrow next to the Stapling setting to display optional Stapling settings and follow in...
Page 133 - Highlight the desired Stapling setting, then click OK.
Printer Drivers 3-103 Printer Driver Screens PCL Driver Screens for Windows 95 Finishing StaplingThe default setting for Stapling is Off. To change this setting: 1 Click the arrow in the Stapling field to view options. Three Stapling options are available. • Single stapling inserts one staple in the...
Page 134 - To leave the Device settings unchanged, click Cancel.
3-104 Printer Drivers Printer Driver Screens PCL Driver Screens for Windows 95 Options (Device) Device SettingsThe Options screen shows the current settings for Finisher, Drawer Base and Memory Installed. This sample screen shows that the FS-105 Finisher is installed, the Drawer Base setting is None...
Page 135 - To leave the Drawer Base setting unchanged, click Cancel.
Printer Drivers 3-105 Printer Driver Screens PCL Driver Screens for Windows 95 Options (Device) Drawer Base SettingThe default setting for Drawer Base is None. To change this setting: 1 Click the arrow in the Drawer Base field to view options.2 Highlight the desired Drawer Base setting, then click O...
Page 136 - PS (PostScript) Driver Screens for Windows NT
Page 137 - PS Driver Screens for Windows NT; Printer Menu
Printer Drivers 3-107 Printer Driver Screens PS Driver Screens for Windows NT Selecting Printer Printer Menu When you select Printer fr om the Printer men u, a sub-screen displays as shown a bove. This screen allows you to select Properties, which displays a General screen for choosing device settin...
Page 139 - To leave the current Memory setting unchanged, click Cancel.
Printer Drivers 3-109 Printer Driver Screens PS Driver Screens for Windows NT Device Settings Installable Options - Memory ConfigurationThe Device Settings tab brings you to the Device Settings scr een shown above. 1 Click Installable Options to displa y a list of installable options, e.g., Memory, ...
Page 140 - To leave the current Drawer Base setting unchanged, click Cancel.
3-110 Printer Drivers Printer Driver Screens PS Driver Screens for Windows NT Device Settings Installable Options - Drawer Base1 To view the current Drawer Base setting, highlight Drawer Base in the Installable options field. This sample screen indicates that the DB-608 Dr awer Base is installed. No...
Page 141 - To leave the current Finisher setting unchanged, click Cancel.
Printer Drivers 3-111 Printer Driver Screens PS Driver Screens for Windows NT Device Settings Installable Options - Finisher1 Highlight Finisher Installed under Installable Options to display the current setting. This sample screen indicates that the FS-105 finisher is installed. Notice that the cur...
Page 142 - To leave the current Paper Size setting unc hanged, clic k Cancel.
3-112 Printer Drivers Printer Driver Screens PS Driver Screens for Windows NT Document Defaults Page Setup Screen - Paper Siz e1 Select Print from the application screen to display the Printer Menu screen, then select Document Defaults to display the Page Setup screen, shown above. The Page Setup sc...
Page 144 - To leave the current Collate setting unchanged, click Cancel.
3-114 Printer Drivers Printer Driver Screens PS Driver Screens for Windows NT Document Defaults Page Setup Screen - CollateWhen checked, the Collate function enables y ou to print multiple sets of an original document and collateeach set in the proper order. In the above scr een, the Colla te functi...
Page 147 - To leave the Duplex setting unchanged, click Cancel.
Printer Drivers 3-117 Printer Driver Screens PS Driver Screens for Windows NT Document Defaults Page Setup - Duplex Printing (None, Short Side, Long Side)When there is no black dot next to [None], Duplex Printing is on and printing will be performed on bothsides of each sheet. When a black dot is vi...
Page 150 - To leave the current Scaling setting unchanged, click Cancel.
3-120 Printer Drivers Printer Driver Screens PS Driver Screens for Windows NT Document Defaults Advanced - ScalingHighlight Scaling under the Graphic heading to view the current setting. The default setting shown a bove is 100%, which means the printed image will be 100% of the originalimage size, i...
Page 152 - Use High mode for graphic images tha t require finer resolution.
3-122 Printer Drivers Printer Driver Screens PS Driver Screens for Windows NT Document Defaults Advanced - Printer Features (Print Quality)Click on Printer Features to view the list, including Print Quality, Edge Smoothing, Print Density, MediaType, Job Offset, Special Modes, Stapling, Wait Mode, Fr...
Page 154 - Choose Toner Save to use 80% of the normal toner amount.
3-124 Printer Drivers Printer Driver Screens PS Driver Screens for Windows NT Document Defaults Advanced - Printer Features (Print Density)Highlight Print Density to display the current setting. Normal is the default setting.Notice that the setting is indicated in the [Change 'Print Density' Setting...
Page 156 - To change the current setting, highlight the desired setting.
Printer Driver Screens PS Driver Screens for Windows NT Document Defaults Advanced - Printer Features (Job Offset)Highlight Job Offset to display the current setting. On is the default setting.Notice that the setting is indicated in the [Change 'Job Offset' Setting] field along with options. 1 To ch...
Page 164 - To leave the current Output Bin setting unchanged, click Cancel.
3-134 Printer Drivers Printer Driver Screens PS Driver Screens for Windows NT Document Defaults Advanced - Pr inter Features (Output Bin)Highlight Output Bin to display the current default setting. Output Bin describes which area of the finisherwill be used as the output tray. This enables y ou to c...
Page 165 - To change the current setting, highlight the desired setting
Printer Drivers 3-135 Printer Driver Screens PS Driver Screens for Windows NT Document Defaults Advanced - Printer Features (Output Order)Highlight Output Order to display the cur rent setting. Face Down is the default setting.Notice that the setting is indicated in the [Change 'Output Order' Settin...
Page 166 - PCL Driver Screens for Windows NT4
Page 167 - PCL Driver Screens for Windows NT
Printer Drivers 3-137 Printer Driver Screens PCL Driver Screens for Windows NT Setup Tab Setup ScreenThe Setup screen displays the following default settings: • Paper Siz e: Letter• Paper Tray: Auto Select• Resolution: 400dpi• Orientation: Portrait To view or change the Paper Siz e, clic k the arrow...
Page 170 - Highlight the desired setting, then click OK.
3-140 Printer Driver Screens Printer Driver Screens PCL Driver Screens for Windows NT Setup Screen ResolutionThe current setting for Resolution is indicated. The default setting is 400 dpi. 1 To change the current setting, clic k on the arrow to display the available settings. 2 Highlight the desire...
Page 171 - To make no selections, clic k Cancel
Printer Drivers 3-141 Printer Driver Screens PCL Driver Screens for Windows NT Watermarks Tab Selecting a WatermarkClick on the Watermar ks tab to display the screen shown a bove. From this screen, you may Select, Edit,Add, or Delete a Water mark. To Select a Water mark, highlight it, then c lick OK...
Page 172 - To leave the settings on this screen unchanged, click Cancel.
3-142 Printer Driver Screens Printer Driver Screens PCL Driver Screens for Windows NT Edit Watermark Edit WatermarkTo edit a Watermark, highlight one of the Watermarks listed on the previous screen, then click Edit todisplay the Edit screen shown above. You may change the Font, Size, Style Color, Sa...
Page 173 - In the Text field, enter the wording for the new Watermark.
Printer Drivers 3-143 Printer Driver Screens PCL Driver Screens for Windows NT Add Watermark Add Watermark1 To add a Watermark, click Add on the Watermarks screen. 2 In the Text field, enter the wording for the new Watermark. 3 Select the Font, Size, Style Color, Saturation, Intensity and the Angle,...
Page 182 - To leave the Front Cover Mode setting unchanged, clic k Cancel.
3-152 Printer Driver Screens Printer Driver Screens PCL Driver Screens for Windows NT Front Covers Front Cover ModeThe Front Cover mode is Off by default. To view options, click the arrow next to the Front Cover field. • Select Printed to print on the Front Cover sheets bef ore inserting them into y...
Page 183 - To leave the Front Cover Tray setting unchanged, click on Cancel.
Printer Drivers 3-153 Printer Driver Screens PCL Driver Screens for Windows NT Front Covers Front Cover Tray1 Click on the arrow next to the Front Cover Tray field to view tray options. 2 Highlight the tray you want to use for the Front Covers, then click OK.In this example, Tray 1 is selected. If y...
Page 184 - To leave the Back Cover Mode setting unchanged, click Cancel.
3-154 Printer Driver Screens Printer Driver Screens PCL Driver Screens for Windows NT Back Covers Back Cover ModeThe Back Cover mode is Off by default. To view options, click the arrow next to the Back Cover field. • Select Printed to print on the Back Cover sheets before inserting them into your do...
Page 188 - Click OK to complete the selection.
3-158 Printer Driver Screens Printer Driver Screens PCL Driver Screens for Windows NT Media Media TypeWhen you click on the arrow next to the Media Type setting, a list of options appears, including OHPTransparency, Thin Paper and Thick Paper. 1 Highlight the setting you require. This screen shows O...
Page 189 - To leave the Finishing settings unchanged, click Cancel.
Printer Drivers 3-159 Printer Driver Screens PCL Driver Screens for Windows NT Finishing Tab Finishing SettingsThe Finishing screen shows the default settings for Collate, Stapling and Output Bin. Click the arrow next to the Stapling setting (Off) to display optional Stapling settings. See next page...
Page 190 - Highlight the desired Stapling setting, then click OK.
3-160 Printer Driver Screens Printer Driver Screens PCL Driver Screens for Windows NT Finishing StaplingThree Stapling options are available. • Single stapling inserts one staple in the upper left corner of your document.• Double Top stapling inserts two staples across the top edge of your document....
Page 192 - To change the setting, highlight the desired setting, then click OK.
3-162 Printer Driver Screens Printer Driver Screens PCL Driver Screens for Windows NT Options (Device) Drawer Base SettingThe current Drawer Base setting is displayed along with options settings. To change the setting, highlight the desired setting, then click OK. To leave the setting unchanged, cli...
Page 194 - Symbol Sets
4-2 Symbol Sets & Roman-8 Character Conversion Tables Symbol Sets
Page 213 - Roman-8 Character Conversion Tables
4-21 Symbol Sets & Roman-8 Character Conver sion Tables Roman-8 Character Conversion Tables
Page 223 - Section 5: PCL 5 Printer Commands
Page 224 - PCL 5 Printer Commands
5-2 PCL Printer Commands PCL 5 Printer Commands The following page display the basic PCL 5 escape codes f or job control, page control, cursor positioningfont selection, font management, vector graphics, raster graphics, printing, macr os, programming, paletteextensions, and HP-GL/2. To obtain addit...