Kohler K-T9492-4-CP- Installation Manual
Kohler K-T9492-4-CP– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT INSTRUCTIONS; READ AND SAVE FOR THE
- Page 4 – Install the Shower Arm and Showerhead
- Page 5 – Water Temperature Adjustment
- Page 6 – Install the Faceplate and Handle
- Page 7 – Guide d’installation; Garniture de valve; INSTRUCTIONS IMPORTANTES; À LIRE ET À LAISSER AU CLIENT
- Page 8 – Outils et matériels
- Page 10 – Installer le bras et la pomme de douche
- Page 11 – Réglage de la température d’eau
- Page 12 – Installer le couvercle et la poignée
- Page 14 – Guía de instalación; Guarnición de la válvula; INSTRUCCIONES IMPORTANTES; LÉALAS Y GUÁRDELAS PARA EL
- Page 16 – Instale el surtidor; Instale el brazo y la cabeza de ducha
- Page 17 – Ajuste de la temperatura del agua
- Page 18 – Instale la placa circular y la manija
Installation Guide
Valve Trim
M
product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345M)
Français, page“ Français-1”
Español, página“ Español-1”
K-T9492
085723-2-AE
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
IMPORTANT INSTRUCTIONS READ AND SAVE FOR THE CONSUMER WARNING: Risk of scalding or other severe injury. • Before completing installation, the installer must set themaximum water temperature setting of this valve to minimize therisks associated with scalding hazards according to ASTM F 444. • Do not ...
1. Install the Spout Remove the temporary nipple from the bath elbow. Install the desired spout according to the instructions packed withthe spout. 2. Install the Shower Arm and Showerhead CAUTION: Risk of product damage. To avoid plugging the showerhead spray outlets, use thread sealant tape on the...
3. Water Temperature Adjustment CAUTION: Risk of personal injury. The water temperature should never be set above 120° F (49° C). NOTE: Do not remove the O-ring and collar at this time. Removing the O-ring and collar will change the factory setting for themaximum water temperature. Turn the valve cl...