Kohler K-T16236-4-SN- Installation Manual

Kohler K-T16236-4-SN

Kohler K-T16236-4-SN– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
Page: / 20

Table of Contents:

  • Page 2 – Observe all local plumbing and building codes.; • Rags
  • Page 3 – Remove the Guard and Cap; Cap; Close Hot
  • Page 5 – Install the Handles
  • Page 6 – Complete the Installation; Spout
  • Page 7 – Guide d’installation; Garniture de robinet de baignoire High-Flow; Outils et matériels; Respecter tous les codes de plomberie et de bâtiment locaux.; • Chiffons
  • Page 8 – Retirer le dispositif de protection et le capuchon; Fermer l’alimentation d’eau principale.; AVERTISSEMENT : Risque de blessures corporelles.; Ne pas; Capuchon
  • Page 10 – Installer les poignées; Visser un adaptateur sur chaque valve.; REMARQUE : Pour les ensembles de manettes à volant :; La
  • Page 11 – Terminer l’installation; Bec
  • Page 12 – Guía de instalación; Guarnición de grifería de bañera de alto flujo; Herramientas y materiales; Cumpla con todos los códigos locales de plomería y construcción.; • Trapos
  • Page 13 – Retire el protector y la tapa; ADVERTENCIA: Riesgo de lesiones personales.
  • Page 14 – Instale el surtidor
  • Page 15 – Instale las manijas; Enrosque un adaptador en cada válvula.; NOTA: Para montajes de manija de palanca:; La manija de palanca
  • Page 16 – Termine la instalación; Verifique que todas las conexiones estén apretadas.; Surtidor
Loading the manual

Installation Guide

High-Flow Bath Faucet Trim

M

product numbers are for Mexico (i.e. K-12345

M

)

Los números de productos seguidos de

M

corresponden a México (Ej.

K-12345

M

)

Français, page “Français-1”

Español, página “Español-1”

K-T16236

1054811-2-B

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Observe all local plumbing and building codes.; • Rags

Tools and Materials Before You Begin Observe all local plumbing and building codes. Shut off the water supply. Install the required valves, K-438-K-NA or K-P438-K-NA, prior toinstalling the product. Refer to the installation instructions packedwith the valves. Kohler Co. reserves the right to make r...

Page 3 - Remove the Guard and Cap; Cap; Close Hot

1. Remove the Guard and Cap Make sure the valves are closed (cold = fully counterclockwise;hot = fully clockwise). Turn off the main water supply. Remove and discard the guard. WARNING: Risk of personal injury. Do not lean over the pipe plug when turning or removing the pipe plug. Thewater supply li...

Page 5 - Install the Handles

3. Install the Handles Apply a bead of plumbers putty or other sealant around thebottom of each adapter according to the sealant manufacturer’sinstructions. Thread an adapter onto each valve. Install a stem extension onto each valve, then securely tightenwith a screw. NOTE: For lever handle assembli...

Other Kohler Models

All Kohler Other