Kohler K-T15225-4-CP- Installation Manual

Kohler K-T15225-4-CP

Kohler K-T15225-4-CP– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
Page: / 24

Table of Contents:

  • Page 3 – Installing Acrylic Handles
  • Page 4 – Install Lever Handles
  • Page 5 – Threaded Spouts
  • Page 7 – Escutcheon
  • Page 8 – Guide d’installation; Robinet baignoire/douche à deux poignées; Outils et matériaux; Clé à molette
  • Page 9 – Installer les poignées en acrylique
  • Page 10 – Installer les poignées à levier
  • Page 11 – Installation de bec fileté; Installation de bec à montage tournant; Bec à montage tournant
  • Page 13 – Installer la pomme de douche; ATTENTION : Risque d’endommagement du produit.; Compléter l’installation; Applique
  • Page 15 – Guía de instalación; Grifería de dos manijas para bañera o ducha; Herramientas y materiales; Llave ajustable
  • Page 16 – Instale las manijas acrílicas
  • Page 17 – Instale las manijas de palanca
  • Page 18 – Instale el surtidor; Instalación del surtidor de montaje roscado; Surtidor de ajuste deslizante
  • Page 20 – Chapetón
Loading the manual

Installation Guide

Two-Handle Bath/Shower Faucet

M

product numbers are for Mexico (i.e. K-12345

M

)

Los números de productos seguidos de

M

corresponden a México (Ej.

K-12345

M

)

Français, page“ Français-1”

Español, página“ Español-1”

K-T15201

K-T15211

K-T15225

1010464-2-B

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - Installing Acrylic Handles

1. Installing Acrylic Handles Discard the thread protectors and apply a bead of plumbers puttyor other sealant around the edge of the escutcheons according tothe manufacturer ’s instructions. Turn each escutcheon clockwise onto the valves until they contactthe finished wall. Remove any excess putty....

Page 4 - Install Lever Handles

2. Install Lever Handles Measure the distance from the top of the valve stem to thefinished surface. Use the brass spline adapter and screw when the valve stemheight is between 1-3/16 ″ (3 cm) and 2-1/8 ″ (5.4 cm). Use the plastic spline adapter when the valve stem height isbetween 2-1/8 ″ (5.4 cm) ...

Page 5 - Threaded Spouts

3. Install the Spout Threaded Spout Installation Remove the temporary nipple. Apply thread sealant to the 1/2 ″ nipple threads on both ends. Install a 1/2 ″ nipple to extend the indicated distance beyond the finished wall. Apply a bead of plumbers putty or other sealant around the inletof the spout ...

Other Kohler Models

All Kohler Other