Kohler K-T13141-3B-CP- Installation Manual
Kohler K-T13141-3B-CP– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Please read all instructions before you begin.; Tube Cutter
- Page 3 – Prepare for Spout installation; Remove the plaster guard from the spout supply tube.
- Page 7 – Complete the Installation; Aerator
- Page 8 – Guide d’installation; Robinet sur baignoire/comptoir; Outils et matériels; Veuillez lire cette notice avant de commencer l’installation.; Coupe tubes
- Page 9 – Se préparer pour l’installation du bec; Retirer le renfort de plâtre du tube d’alimentation du bec.; Comptoir fini
- Page 10 – ATTENTION : Risque d’endommagement du produit.; Travailler; Manchon
- Page 11 – Installer les poignées; Installer les extensions de tige sur les tiges de valve.; Poignée
- Page 13 – Compléter l’installation; S’assurer de fermer les deux poignées de robinet.; Aérateur
- Page 14 – Guía de Instalación; Grifería de montaje en cubierta o bañera; Herramientas y materiales; Lea estas instrucciones atentamente antes de comenzar.; Cortatubos
- Page 15 – Prepare la instalación del surtidor
- Page 16 – Instale el surtidor; Tenga cuidado al; Base del surtidor
- Page 17 – Instale las manijas; Instale las extensiones de espiga sobre las espigas de válvula.; de
- Page 19 – Termine la instalación; Verifique que las manijas de la grifería estén cerradas.; Aireador
Installation Guide
Bath/Deck Mount Faucet
M
product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345M)
Français, page“ Français-1”
Español, página“ Español-1”
K-T13140
K-T13141
1036138-2-A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Tools and Materials Thank You For Choosing Kohler Company We appreciate your commitment to Kohler quality. Please take a fewminutes to review this manual before you start installation. If youencounter any installation or performance problems, please don’thesitate to contact us. Our phone numbers and...
1. Prepare for Spout installation Remove the plaster guard from the spout supply tube. Cut off the spout supply tube 1-3/4” (4.4 cm) above the rim,finish deck, or tile. Make sure all burrs are removed from thesupply tube to prevent damage to the O-ring seal on the sleeve. Rough Deck Tile Finish 1-3/...
4. Complete the Installation Ensure that both faucet handles are turned off. Remove the aerator assembly. Turn on the main water supply and check for leaks. Turn on the hot and cold valves and run water through the spoutto remove debris. Check for leaks. Turn off the hot and cold valves. Remove any ...
