Kohler K-8003-BV- Installation Manual

Kohler K-8003-BV

Kohler K-8003-BV– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
Page: / 28

Table of Contents:

  • Page 2 – Observe all local plumbing and building codes.
  • Page 3 – Install the Supply Piping; Multiple Bodyspray Installations; Route the water supply lines.; Single Bodyspray Installations; Route the water supply line.; All Installations; Do not strap the pipes at this time.; Single Bodyspray Installation; Nipple
  • Page 4 – Thin Wall Installations; Thin wall installations have a finished wall thickness of less; Standard Wall Installations; Thin Wall
  • Page 5 – Install the Finished Wall; Install the Wall Material; Verify Depth and Install the Nipple; Cutout
  • Page 6 – Install the Waterway; If the leak shield makes contact with the elbow:
  • Page 7 – Complete the Installation; Attach the Sprayhead
  • Page 9 – Guide d’installation; Carrelage jet corporel; Outils et matériels; Respecter tous les codes de plomberie et de bâtiment locaux.
  • Page 10 – Installer la tuyauterie d’alimentation; Installations de jets corporels multiples; Acheminer les lignes d’alimentation d’eau.; Installations d’un seul jet corporel; Acheminer la ligne d’alimentation d’eau.; Toutes les installations; Ne pas attacher les tuyaux à ce moment.; seul jet corporel; Mamelon
  • Page 11 – Installations de murs fins; Les installations de mur fin ont une épaisseur de mur; Installations de murs standards; Mur fin
  • Page 13 – Installer le mur fini; Installer le matériau du mur; Vérifier la profondeur et installer le mamelon; Découpe
  • Page 15 – Installer le passage d’eau; Si l’anti-fuites fait contact avec le coude:
  • Page 16 – Compléter l’installation; Attacher la tête du vaporisateur
  • Page 18 – Guía de instalación; Rociador corporal en forma de azulejo; Herramientas y materiales; Cumpla con todos los códigos locales de plomería y construcción.
  • Page 19 – Instale las tuberías de suministro; Instalaciones de múltiples rociadores corporales; Haga el tendido de las líneas de suministro.; Instalaciones de un solo rociador corporal; Haga el tendido de la línea de suministro.; Todas las instalaciones; No instale abrazaderas para tubos en este momento.; Instalación de un solo; Niple
  • Page 20 – Instalaciones en pared delgada; Las instalaciones en pared delgada tienen un espesor de; Instalaciones en pared estándar; Pared delgada
  • Page 22 – Instale la pared acabada; Instale el material de la pared; Verifique la profundidad e instale el niple; Abertura
  • Page 23 – Instale la vía de agua; Si el protector contra fugas entra en contacto con el codo:; protector contra fugas.; Vía de agua
  • Page 24 – Termine la instalación; Instale la cabeza del rociador
Loading the manual

Installation Guide

Bodyspray Tile

M

product numbers are for Mexico (i.e. K-12345

M

)

Los números de productos seguidos de

M

corresponden a México (Ej.

K-12345

M

)

Français, page “Français-1”

Español, página “Español-1”

K-8002

K-8003

1043851-2-E

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Observe all local plumbing and building codes.

Tools and Materials Before You Begin Observe all local plumbing and building codes. Inspect the supply piping for damage. Replace as necessary. Kohler Co. reserves the right to make revisions in the design offaucets without notice, as specified in the Price Book. 5/64" & 5/32" Hex Wrench...

Page 3 - Install the Supply Piping; Multiple Bodyspray Installations; Route the water supply lines.; Single Bodyspray Installations; Route the water supply line.; All Installations; Do not strap the pipes at this time.; Single Bodyspray Installation; Nipple

1. Install the Supply Piping Multiple Bodyspray Installations Route the water supply lines. If installing more than one bodyspray off the same supply line,construct a pressure balancing loop. Locate a tee along the loop ateach bodyspray installation location. Do not strap the pipes at this time. Sin...

Page 4 - Thin Wall Installations; Thin wall installations have a finished wall thickness of less; Standard Wall Installations; Thin Wall

2. Install the Plaster Guard Install the plaster guard. Push until the plaster guard is snugagainst the face of the elbow (or tee). 3. Set the Pipe Depth Thin Wall Installations NOTE: Thin wall installations have a finished wall thickness of less than 1/2 ″ (1.3 cm). To adjust the pipe depth, use a ...

Other Kohler Models

All Kohler Other