Kohler K-7308-5A-CP- Installation Manual

Kohler K-7308-5A-CP

Kohler K-7308-5A-CP– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
Page: / 20

Table of Contents:

  • Page 3 – Install the Supply Stops; Flange
  • Page 4 – Install the Faucet Assembly; Spout
  • Page 5 – Install the Handles; Valve Stem
  • Page 6 – Installation Checkout; Key
  • Page 7 – Guide d’installation; Robinets de cuisine à fixation murale; Outils et matériels; Clé à molette
  • Page 8 – Bride
  • Page 9 – Bec
  • Page 10 – Installer les poignées; Bouchon
  • Page 11 – Vérification de l’installation; Clé
  • Page 12 – Guía de Instalación; Griferías murales de cocina; Herramientas y materiales
  • Page 13 – Instale las llaves de paso; desde los
  • Page 14 – Instale el montaje de la grifería; Surtidor
  • Page 15 – Instale las manijas; Tapón
  • Page 16 – Verificación de la instalación; Llave
  • Page 17 – AB
Loading the manual

Installation Guide

Wall Mount Kitchen Faucets

M

product numbers are for Mexico (i.e. K-12345M)

Los números de productos seguidos de

M

corresponden a México (Ej.

K-12345M)

Français, page“ Français-1”

Español, página“ Español-1”

K-7308

113701-2-AB

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - Install the Supply Stops; Flange

1. Install the Supply Stops NOTE: Ensure that one flange is threaded onto each cold and hot supply stop. Apply thread sealant onto the exposed threads of each cold andhot 1/2 ″ NPT supply pipe. Slide one supply stop assembly onto each cold and hot 1/2 ″ NPT supply pipe. Thread each cold and hot supp...

Page 4 - Install the Faucet Assembly; Spout

2. Install the Faucet Assembly Apply thread sealant to threads of spout. Thread spout onto faucet body until tight and properly aligned. Place a washer inside each stop nut. Hold faucet body against stops and thread stop nuts onto faucetbody. Hand tighten stop nuts. Align the spout to face straight ...

Page 5 - Install the Handles; Valve Stem

3. Install the Handles NOTE: The spline adapter supplied in the blade handle kit is not used with this faucet assembly. Press one handle onto each cold and hot valve stem. Ensure thatthe splines inside the handle and valve stem are engaged. Check for proper alignment. To adjust the alignment, remove...

Other Kohler Models

All Kohler Other