Kohler K-7114-A-CP- Installation Manual
Kohler K-7114-A-CP– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Adjustable Wrench
- Page 3 – Drain Installation; For installation to thin-walled vessel style lavatories:
- Page 4 – Complete Drain Installation; under
- Page 5 – Guide d’installation; Drain escamotable; Outils et matériels; Clé à molette
- Page 6 – Installation du drain; Pour une installation à des lavabos avec vasque à parois fines:
- Page 7 – Compléter l’installation du drain; sous
- Page 9 – Guía de instalación; Desagüe automático; Herramientas y materiales; Llave ajustable
- Page 10 – Instalación del desagüe; Para la instalación en lavabos estilo vessel de pared delgada:
- Page 11 – Termine la instalación del desagüe; debajo
Installation Guide
Pop-Up Drain
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345
M
)
Français, page “Français-1”
Español, página “Español-1”
K-7114, K-7126
1041498-2-C
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Tools and Materials Before You Begin Observe all local plumbing and building codes. If possible, install the drain before installing the plumbing fixture. Inspect the supply tubing for damage. Replace as necessary. Kohler Co. reserves the right to make revisions in the design offaucets without notic...
Drain Installation Remove the protective cover from the flange. Unscrew the flange from the drain body. For installation to thin-walled vessel style lavatories: remove the tapered gasket from the drain body and install the thick taperedgasket. Apply a ring of plumbers putty or other sealant to the u...
Complete Drain Installation IMPORTANT! If the tailpiece has been removed, double check that the plastic washer is installed inside the flange body or the drainwill leak. Connect the P-trap to the tailpiece. Press the seal into the lift rod hole on the body. Insert the stopper into the flange. For re...
