Kohler K-6366-96- Installation Manual
Kohler K-6366-96– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – model number
- Page 4 – Do not apply sealant at this time.
- Page 5 – Care and Cleaning; Removing Minor Surface Damage
- Page 6 – Warranty; ONE-YEAR LIMITED WARRANTY; Use of in-tank toilet cleaners will void the warranty.; This is Kohler Co.’s exclusive written warranty.
- Page 7 – Guide d’installation et d’entretien; Baignoire autoportante; Outils et matériaux; numéro de modèle
- Page 9 – Sol fini
- Page 10 – Préparer la baignoire; Ne pas appliquer de mastic à ce point.
- Page 11 – Installer la baignoire; Entretien et nettoyage; Éliminer les dommages mineurs de la surface
- Page 12 – Garantie; GARANTIE LIMITÉE D’UN AN; Ceci constitue la garantie écrite exclusive de Kohler Co.
- Page 13 – Guía de instalación y cuidado; Bañera autosoportada; Herramientas y materiales; número de modelo
- Page 15 – Tubo de desagüe
- Page 16 – Aún no aplique sellador.
- Page 17 – Cuidado y limpieza; Para retirar daños menores de la superficie
- Page 18 – Garantía; GARANTÍA LIMITADA DE UN AÑO; Ésta es la garantía exclusiva por escrito de Kohler Co.
Installation and Care Guide
Freestanding Bath
Retain serial number for reference:
Conserver le numéro de série pour référence:
Guarde el número de serie para referencia:
_____________________
Français, page
″
Français-1
″
Español, página
″
Español-1
″
1214189-2-B
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Tools and Materials Before You Begin NOTICE: Adequate floor support must be provided. Note the model number on the back of the bath, then visit the product page at www.kohler.com for additional information. NOTICE: Do not support the load weight of the bath by the rim. IMPORTANT! To ensure a success...
2. Prepare the Bath Dry fit the drain and overflow assembly to the bath. Do not apply sealant at this time. With help, position the bath only (without the apron) over the P-trap and secure the connection. Loosen the drain and overflow connections from the bath. Remove the bath, leaving the drain and...
3. Install the Bath Apply a generous amount of silicone adhesive to the support blocks on the bottom of the bath. Apply sealant to the gaskets on the drain and overflow assembly. With help, carefully lift the bath into place over the apron. Make sure the bath rim engages the topof the apron on all s...