Kohler K-4388-0- Installation Manual
Kohler K-4388-0– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WARNING: Risk of personal injury or product damage.; Handle
- Page 3 – Remove the Existing Toilet; If the new toilet is not
- Page 4 – Prepare for Bowl Installation; Remove the rag from the outlet flange before setting the bowl.; Outlet
- Page 5 – Carefully align and set the bowl into position.; Gasket
- Page 6 – Turn on the water supply.
- Page 7 – Guide d’installation; Outils et matériaux; Manipuler avec précaution. La
- Page 8 – ATTENTION : Risque d’émanation de gaz nocifs.; Fermer l’alimentation d’eau.; Boulons en T
- Page 9 – Se préparer pour l’installation de la cuvette; Sortie
- Page 10 – Installer la cuvette; pas
- Page 11 – Installer la valve de chasse; Ouvrir l’alimentation d’eau.
- Page 12 – Guía de instalación; Inodoros comerciales; Herramientas y materiales; Trate el producto con cuidado. La porcelana vitrificada
- Page 13 – Desmonte el inodoro existente; PRECAUCIÓN: Riesgo de fuga de gases nocivos.; Si el inodoro; Raspe el sello de cera viejo.
- Page 14 – Prepare la instalación de la taza; Salida
- Page 16 – Abra el suministro de agua.
Installation Guide
Commercial Toilets
K-4386, K-4388, K-4396,
K-4398
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345
M
)
Français, page “Français-1”
Español, página“ Español-1”
1007283-2-B
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Tools and Materials Thank You For Choosing Kohler Company We appreciate your commitment to Kohler quality. Please take a fewminutes to review this manual before you start installation. If youencounter any installation or performance problems, please don’thesitate to contact us. Our phone numbers and...
1. Remove the Existing Toilet CAUTION: Risk of hazardous gases. If the new toilet is not installed immediately, temporarily place a rag in the closetflange. Turn off the water supply. Flush the toilet. Sponge out all remaining water from the tank. Disconnect the flush valve. Remove the caps, washers...
2. Prepare for Bowl Installation Secure the outlet connection or flange to the wall with T-boltsaccording to the manufacturer’s instructions. Remove the rag from the outlet flange before setting the bowl. Temporarily set the bowl into place against the finished wall. Mark the location of the floor b...
