Kohler K-411-NA- Installation Manual
Kohler K-411-NA– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Drill
- Page 4 – Install the Spout Supply Tube; Plate
- Page 5 – Check Operation of Valves
- Page 6 – Guide d’installation; Manche de bec remplisseur de baignoire; Outils et matériels; Perceuse
- Page 8 – Dimensions de raccordement
- Page 9 – Installer le tube d’alimentation du bec; Attacher la tuyauterie; Plaque
- Page 11 – Vérifier le fonctionnement des valves; AVERTISSEMENT : Risque de blessure corporelle.
- Page 12 – Guía de instalación; Vástago del surtidor de bañera; Herramientas y materiales; Taladro
- Page 14 – Dimensiones de instalación
- Page 15 – Instale el tubo de suministro del surtidor; Placa
- Page 17 – Verifique el funcionamiento de las válvulas; ADVERTENCIA: Riesgo de lesiones personales.
Installation Guide
Bath Filler Spout Shank
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345
M
)
Français, page“ Français-1”
Español, página“ Español-1”
K–411
1010568-2-B
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Tools and Materials Thank You For Choosing Kohler Company We appreciate your commitment to Kohler quality. Please take a fewminutes to review this manual before you start installation. If youencounter any installation or performance problems, please don’thesitate to contact us. Our phone numbers and...
2. Install the Spout Supply Tube NOTE: Leave the protective sleeve on the spout supply tube until the spout installation. Slide the brass washer from the bottom of the spout supply tubeover the threads until it reaches the spout supply shoulder. Insert the spout supply tube through the mounting hole...
4. Check Operation of Valves WARNING: Risk of personal injury. Wrap a towel around the pipe plug to prevent water spray. Water will purge from thesupply tube when you remove the plug. Thread a 3/8 ″ pipe plug into the top of the spout supply tube. Ensure that the valves are closed (cold = fully coun...
