Kohler K-258-BR-96- Installation Manual
Kohler K-258-BR-96– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Please read all instructions before you begin.; Screwdrivers
- Page 3 – Bonnet
- Page 5 – Setscrew
- Page 6 – Guide d’installation; Kit; Outils et matériels; Veuillez lire toutes les instructions avant de commencer.; Tournevis
- Page 7 – ATTENTION : Risque d’endommagement du produit.; Pour éviter; Chapeau
- Page 9 – Vis de retenue
- Page 10 – Guía de instalación; Herramientas y materiales; Lea todas las instrucciones antes de comenzar.; Destornilladores
- Page 11 – ¡IMPORTANTE! Riesgo de daños al producto.; Para evitar dañar la; Bonete
- Page 12 – Anillo de cerámica
- Page 13 – Para evitar dañar las
- Page 14 – AC
Installation Guide
Ceramic Oval Handle Trim Kit
K-251, K-253, K-258,
K-260, K-262, K-264,
K-273, K-274
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345
M
)
Français, page “Français-1”
Español, página “Español-1”
110424-2-AC
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Tools and Materials Thank You For Choosing Kohler Company We appreciate your commitment to Kohler quality. Please take a fewminutes to review this manual before you start installation. If youencounter any installation or performance problems, please don’thesitate to contact us. Our phone numbers and...
1. Installing the K-258 and K-260 Handles IMPORTANT! Risk of product damage. To avoid damaging the ceramic cap, do not overtighten the flathead screw. If replacing the ceramic trim, loosen the setscrew and pull thehandle off the stem extension. Remove the stem extension. Insert a wide-bladed screwdr...
3. Installing the K-264 Handles IMPORTANT! Risk of product damage. To avoid damaging the ceramic caps, do not overtighten the flathead screws. If replacing the ceramic trim, loosen the setscrew(s) and pull thehandle off the bonnet. For new and replacement installations, place the ceramic cap intothe...
