Kohler K-2276-B11- Installation Manual
Kohler K-2276-B11– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SELF-RIMMING INSTALLATION
- Page 5 – ABOVE-COUNTER INSTALLATION
- Page 8 – IMPORTANT CONSUMER INFORMATION; CLEANING YOUR VESSELS LAVATORY; CALL US FOR HELP
- Page 9 – SPUN GLASS; ANTES DE COMENZAR; NOTAS; Notas para la instalación
- Page 10 – INSTALACIÓN DE MODELOS CON BORDE TERMINADO; Plantilla de Recorte
- Page 13 – INSTALACIONES SOBRE EL MOSTRADOR
- Page 16 – INFORMACIÓN IMPORTANTE PARA EL CONSUMIDOR; LIMPIEZA DE LOS LAVABOS VESSELS; PARA ASISTENCIA
- Page 17 – AVANT DE COMMENCER; NOTES; Diagramme de raccordement
- Page 18 – INSTALLATION À REBORD INTÉGRÉ; Gabarit
- Page 21 – INSTALLATION SUR COMPTOIR
- Page 24 – NOTICE IMPORTANTE AU CONSOMMATEUR; NETTOYAGE DU LAVABO VESSELS
Fig. #1
9”
(22.9cm)
MIN.
27”
(68.6cm)
MIN.
8”
(20.3cm)
MIN.
6”
(15.2cm)
MAX.
ADA CLEARANCE, SELF-RIMMING ONLY
3-1/2”
(8.9cm)
34”
(86.4cm)
24” (61cm)
***10”
(25.4cm)
(T)
3/8” COLD
1-1/4” OUTLET
(S)
C
L OF FITTING*
3/8” HOT
ADA DRAIN OUTLET
***10”
(25.4cm)
17-1/2” (44.5cm) D.
10-3/4”
(27.3cm)
1-1/4” (3.2cm)
**3”
(7.6cm)
6”
(15.2cm)
4” (10.2cm)
1-1/2”
(3.8cm)
4” (10.2cm)
1010430-2-
A
Español, Página 9
Français, Page 17
SPUN GLASS
VESSELS
SELF-RIMMING AND
ABOVE-COUNTER LAVATORIES
K-2276
BEFORE YOU BEGIN
NOTES
Use these instructions for both self-rimming, and
above-counter installations. Follow only the
instructions that apply to your installation.
This lavatory gives you the opportunity to be
creative and flexible with the installation.
You can choose between a wall-mount or
countertop faucet installation, depending upon the
setting and styling you desire. We recommend a
wall-mount faucet.
Prior to installation, unpack the new lavatory and
carefully inspect it for damage. Return the lavatory
to its protective carton until you are ready to install
it.
During installation, store the lavatory in the
protective carton whenever possible.
Never stand or store the lavatory on the drain
surface.
To ease forming of the supplied adhesive seal,
install this lavatory when the temperature is
between 70
°
F (21
°
C) and 100
°
F (37
°
C).
These instructions contain important care, cleaning,
and warranty information - please leave these
instructions for the consumer.
TOOLS AND MATERIALS REQUIRED
Safety glasses
Safety shoes
Pencil
Scissors
Tape measure
Putty knife
Hole saw
Keyhole saw or saber saw
Drill (1/2” dia. drill bit or larger)
Clear silicone sealant (optional)
50/50 mix of isopropyl alcohol and water
Waterproof sealer (for porous countertops)
PRODUCT INFORMATION
Approximate weight
18 lbs. (8 Kg.)
. . . . . . . . . . . . . .
CAUTION: Risk of personal injury or product
damage. This lavatory is made of glass. Always use
the same extreme care appropriate for fine china
when handling to avoid breakage.
ROUGHING-IN DIMENSIONS
Roughing-In Notes
( T ) Pop-up drain 9” (22.9cm).
( S ) 14” (35.6cm) (Based on 12” (30.5cm) riser which may require
cutting.)
* Spout must be 5” (12.7cm) long (min.) for adequate clearance
into lavatory when installed with centerline as shown.
** Spout must be tall enough to clear 3” (7.6cm) rim height and
provide a 1” (2.5cm) air gap per ASME A112.1.2.
*** Based on K-9018, with 1” (2.5cm) of tailpiece exposed.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 1010430-2- A Kohler Co., Kohler, WI U.S.A. SELF-RIMMING INSTALLATION Determine the faucet centerline location. Consider thefaucet and handle escutcheon diameters, the length ofthe spout, and the clearance between the spout and thelavatory rim. Calculate the faucet centerline measurement by firstdi...
5 1010430-2- A Kohler Co., Kohler, WI U.S.A. Connect the faucet supply lines. Connect the drain assembly. Open the faucet valves, and check for leakage. Clean up with a non-abrasive cleaner. Fig. #12 Nut Gasket Nut Gasket ABOVE-COUNTER INSTALLATION Cut out the template along the inside of the templa...
8 1010430-2- A Kohler Co., Kohler, WI U.S.A. IMPORTANT CONSUMER INFORMATION CLEANING YOUR VESSELS LAVATORY Keep your Vessels lavatory looking new by rinsing it outthoroughly after each use. Do not regularly use abrasiveson the lavatory surface, as this will eventually scratch anddull the surface. Fo...
