Kohler K-15888-K-CP- Installation Manual
Kohler K-15888-K-CP– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Faucet Installation; Faucet
- Page 4 – Install the Handles; Bonnet
- Page 5 – Install the Supplies; For ground joint connections:; Installation Checkout; Supply Stop
- Page 6 – Guide d’installation; Robinet d’évier de cuisine; Outils et matériels; Clé à molette
- Page 8 – Installation du robinet; Robinet
- Page 9 – Installer la poignée; Pour des poignées Euro:
- Page 10 – Installer les alimentations; Pour raccords avec joints coniques:; Vérification de l’installation; Écrou
- Page 12 – Guía de instalación; Grifería de fregadero de cocina; Herramientas y materiales
- Page 14 – Instalación de la grifería; Grifería
- Page 16 – Instale los suministros; Para las conexiones de junta esmerilada:; Verificación de la instalación; Llave de paso
- Page 18 – AB
Installation Guide
Kitchen Sink Faucet
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345
M
)
Français, page“ Français-1”
Español, página“ Español-1”
K-15888
1011143-2-AB
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1. Faucet Installation Apply plumbers putty or other sealant to the underside of thefaucet according to the manufacturer’s instructions. Center and align the faucet on the sink. Securely hand tighten the nuts from under the sink. Remove any excess putty or sealant. Faucet Sink Nut Apply plumbers put...
2. Install the Handles For Euro handles: Align the ″ D ″ shape of the valve stem and the hole in the handle. Secure the handles with a screw and finishing trim. For Cross handles: Align the ″ D ″ shape of the valve stem and the hole in the handle. Secure the insert with the screw. Align the slots on...
3. Install the Supplies NOTE: If the supply tubes need to be cut, allow for required penetration of the tube into the supply stop. For ground joint connections: Slip the nut onto the supply tube. Position the round end of the supply tube squarely to the inlet ofthe faucet shank and supply stop. Tigh...
