Kohler K-15275-4-CP- Installation Manual
Kohler K-15275-4-CP– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Observe all local plumbing and building codes.
- Page 3 – Install the Faucet Body; Securely hand tighten the nuts.; Inlet
- Page 4 – Supply Connections; Identify the supply connection type.; Installation Checkout; Ensure that all connections are tight.; Nut; Union; Aerator
- Page 5 – Guide d’installation; Robinet d’évier annexe à deux poignées; Outils et matériels; Respecter tous les codes de plomberie et de bâtiment locaux.; Clé à molette
- Page 6 – Arrivée
- Page 7 – Connexions d’alimentation; Identifier le type de connexion d’alimentation.; Vérification de l’installation; S’assurer que tous les raccords soient bien serrés.; Écrou; Chaud; Aérateur
- Page 8 – Guía de Instalación; Herramientas y materiales; Cierre el suministro principal de agua.
- Page 9 – Instale el cuerpo de la grifería; Apriete bien las tuercas a mano.; Entrada
- Page 10 – Conexiones de suministro; Identifique el tipo de conexión del suministro.; Verificación de la instalación; Asegúrese de que todas las conexiones estén apretadas.; Tuerca; Agua caliente; Aireador
Installation Guide
Two-Handle Entertainment Sink Faucet
M
product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345M)
Français, page“ Français-1”
Español, página“ Español-1”
K–15840
K–15890
K–15275
1010459-2-B
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Thank You For Choosing Kohler Company We appreciate your commitment to Kohler quality. Please take a fewminutes to review this manual before you start installation. If youencounter any installation or performance problems please don’thesitate to contact us. Our phone numbers and website are listed o...
1. Install the Faucet Body Apply a bead of plumbers putty or other sealant to the undersideof the undercover according to manufacturer’s instructions. Position the undercover over the mounting holes. Press theundercover down until it is snug against the sink. From the top of the sink, insert the fau...
2. Supply Connections Install the sink (if needed) according to the sink manufacturer’sinstructions. Identify the supply connection type. Connect the supply tubes to the handle valves, and the supplystops. Left is hot, right is cold. Tighten all connections. 3. Installation Checkout Ensure that all ...
