Kohler K-13816-CP- Installation Manual
Kohler K-13816-CP– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Shut off the main water supply.; Screws
- Page 4 – Install the Foot Control; Secure the Base
- Page 5 – Installation Checkout; Turn on the water supply.
- Page 6 – Guide d’installation; Pédale de contrôle montage mural; Outils et matériels; Couper l’alimentation d’eau principale.; Clé à molette
- Page 7 – Plan de raccordement; Sol fini
- Page 8 – Installer la pédale de contrôle; Sécuriser la base; Sécuriser la base à la valve avec trois vis à têtes plates (fournies).; Connecter les alimentations; Raccorder les alimentations d’eau chaude et froide à la valve.; Pédales
- Page 9 – Si les pédales sont en contact avec le couvercle, la; Vérification de l’installation; Ouvrir l’alimentation d’eau.
- Page 10 – Guía de instalación; Control de pedal de montaje a la pared; Herramientas y materiales; Cierre el suministro principal de agua.; cabeza plana
- Page 11 – Diagrama de instalación; Piso acabado
- Page 12 – Instale el control de pedal; Fije la base; Antes de fijar la base a la pared acabada, asegúrese de haber; Conecte los suministros; Conecte los suministros del agua fría y caliente a la válvula.
- Page 13 – Si los pedales tocan la tapa, es necesario ajustar la altura de; Verificación de la instalación; Abra el suministro de agua.
- Page 14 – AC
Installation Guide
Wall-Mount Foot Control
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345
M
)
Français, page “Français-1”
Español, página “Español-1”
K-13816
105345-2-AC
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Tools and Materials Before You Begin Shut off the main water supply. Observe all local plumbing codes and building codes. Provide sufficient reinforcement to the wall. Select flathead screws that are long enough to secure the base ofthe foot control to the finished wall. Kohler Co. reserves the righ...
1. Install the Foot Control Secure the Base Securely tighten the base to the valve with three flathead screws(provided). Connect the lavatory or sink supply to the valve. Refer to theinstructions packed with the lavatory or sink supply. NOTE: Before securing the base to the finished wall, make sure ...
Install the Foot Control (cont.) and base. Loosen the hex nuts on the adjustment screws until thefoot pedals are even and will no longer touch the cover. Retightenthe hex nuts. Reinstall the cover over the valve and base, thenrecheck the height of the pedals. Installation Checkout Turn on the water ...
