Kohler K-11365-CP- Installation Manual
Kohler K-11365-CP– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Install the Mounting Plate; To avoid possible electrical; Wires
- Page 4 – Connect the Electrical Wires; Ground; Bare; Outlet
- Page 5 – Complete the Installation; The illustration may differ from the actual product. The; Mounting Plate
- Page 6 – Guide d’installation; Chandelier d’applique; Outils et matériels; Afin d’éviter un; Afin d’éviter un; AVERTISSEMENT : Risque d’endommagement du matériel.; Respecter tous les codes locaux d’électricité et de bâtiment.
- Page 7 – Cet appareil est conçu uniquement pour un usage intérieur.
- Page 8 – Installer la plaque de montage; Câbles
- Page 9 – Connecter les câbles électriques; Terre; Nu; Sortie
- Page 11 – Compléter l’installation; L’illustration peut différer du produit actuel. Les; Verre
- Page 12 – Guía de instalación; Lámpara de pared; Herramientas y materiales; Para evitar una; ADVERTENCIA: Riesgo de daños a la propiedad.; Para evitar el
- Page 14 – Instale la placa de montaje; Cables
- Page 15 – Conecte los cables eléctricos; Tierra; Desnudo
- Page 16 – Termine la instalación; La ilustración puede diferir del producto real. Las; Placa de montaje
Installation Guide
Wall Sconce
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345
M
)
Français, page “Français-1”
Español, página “Español-1”
K-10570
K-10571
K-10572
K-11365
K-11366
K-11367
1041769-2-B
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1. Install the Mounting Plate DANGER: Risk of personal injury. To avoid possible electrical shock, the electricity must be turned off at the circuit breaker orfuse box before attempting any installation procedure. Carefully pull the wiring out from the outlet box and allow thewires to hang down. Pla...
2. Connect the Electrical Wires DANGER: Risk of personal injury. To avoid possible electrical shock, the outlet box must be properly grounded. Attach the bare copper ground wire from the fixture to theground wire (green or bare wire) of the outlet box. Fasten the ground wires together with a plastic...
3. Complete the Installation NOTE: The illustration may differ from the actual product. The instructions still apply. Secure the fixture to the mounting plate with the side-mountscrews. The fixture should be flush against the finished wall. Remove the screw collar(s) from the threaded socket(s) of t...