Kohler K-11075-4-BN- Installation Manual
Kohler K-11075-4-BN– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Adjustable Wrench
- Page 3 – Install the Faucet; Mounting Nuts
- Page 5 – For All Other Installations:
- Page 6 – Connect the Supplies; Installation Checkout; Shank
- Page 7 – Guide d’installation; Robinet de lavabo à petit entraxe; Outils et matériels; Clé à molette
- Page 8 – Installer le robinet; Manche
- Page 9 – Installer le drain
- Page 10 – Pour toutes les autres installations:
- Page 12 – Guía de instalación; Grifería de lavabo de orificios centrales; Herramientas y materiales; Llave ajustable
- Page 13 – Instale la grifería; Vástago
- Page 14 – Instale el desagüe
Installation Guide
Centerset Lavatory Faucet
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345
M
)
Français, page “Français-1”
Español, página “Español-1”
K-11075
1070993-2-A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Thank You For Choosing Kohler Company We appreciate your commitment to Kohler quality. Please take a fewminutes to review this manual before you start installation. If youencounter any installation or performance problems, please don’thesitate to contact us. Our phone numbers and website are listed ...
1. Install the Faucet Clean the lavatory surface to remove any grease, oil, or debris. Insert the faucet shanks into the mounting holes. Thread a mounting nut onto each shank. Hand tighten the mounting nuts to secure the faucet to themounting surface. Insert the lift rod into the hole in the faucet....
Install the Drain (cont.) Insert the short end of the rod into the seal hole and under thestopper. Loosely secure in place with the rod nut. Push the rod down to open the drain. Insert the stopper into the drain assembly. Remove and adjust the stopper so it lifts approximately 3/8 ″ (1 cm) when open...
