Kohler 8022A - Manual
Kohler 8022A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SPECIFICATION; Pressures; For multiple outlets an operating pressure of 3.0 bar or greater is; Plumbing Connections; (Hot) and Cold (C) inlets must be connected to the; Building in Depth; Minimum building in depth is 79 mm. It is recommended that; DIMENSIONS; Please leave these instructions for the consumer.; BEFORE YOU BEGIN
- Page 3 – Install the Pipe and Elbow; ION; Before you Begin; Before installation carefully inspect the new
- Page 4 – Install the Components:; firmly; Install the Waterway:; completely
- Page 5 – Finish the Installation; flus; Attach the Sprayhead
- Page 6 – SPARE PARTS
- Page 7 – CARE AND CLEANING; dabbing action to dry metal, not an abrasive or rubbing action.
1
1063864-AN2-E 17/02/12
IMPORTANT
INSTALLER:
THIS MANUAL IS THE PROPERTY OF THE
CUSTOMER AND MUST BE RETAINED WITH THE PRODUCT
FOR MAINTENANCE AND OPERATIONAL PURPOSES.
Installation and User Guide
Watertile Showerhead
MODEL NUMBERS
Important!
Please quote the above model number(s) when ordering spares
8022A, 8023A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 1063864-AN2-E 17/02/12 SPECIFICATION Pressures For multiple outlets an operating pressure of 3.0 bar or greater is recommended to ensure optimum performance. Plumbing Connections (Hot) and Cold (C) inlets must be connected to the correct inlet supplies. Building in Depth Minimum building in depth ...
3 1063864-AN2-E 17/02/12 Install the Pipe and Elbow 1. Install the water supply pipes. 2. Install the wall mount elbow to the end of the water supply pipe at the shower head installation location. Note! The wall mount elbow, wall plugs and fixing screws are not supplied with the product. The installe...
4 1063864-AN2-E 17/02/12 Install the Watertile ShowerheadPrepare the Housing: 1. Position the housing so that the back of the leak shield is facing you. 2. Apply a bead of silicone sealant in the groove around the outside of the housing. Do not apply silicone sealant in or near the weep hole. 3. All...
