Kohler 8022A - Manuals

Kohler 8022A – Manual in PDF format online.

Manuals:

Manual Kohler 8022A

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7

Summary

Page 2 - SPECIFICATION; Pressures; For multiple outlets an operating pressure of 3.0 bar or greater is; Plumbing Connections; (Hot) and Cold (C) inlets must be connected to the; Building in Depth; Minimum building in depth is 79 mm. It is recommended that; DIMENSIONS; Please leave these instructions for the consumer.; BEFORE YOU BEGIN

2 1063864-AN2-E 17/02/12 SPECIFICATION Pressures For multiple outlets an operating pressure of 3.0 bar or greater is recommended to ensure optimum performance. Plumbing Connections (Hot) and Cold (C) inlets must be connected to the correct inlet supplies. Building in Depth Minimum building in depth ...

Page 3 - Install the Pipe and Elbow; ION; Before you Begin; Before installation carefully inspect the new

3 1063864-AN2-E 17/02/12 Install the Pipe and Elbow 1. Install the water supply pipes. 2. Install the wall mount elbow to the end of the water supply pipe at the shower head installation location. Note! The wall mount elbow, wall plugs and fixing screws are not supplied with the product. The installe...

Page 4 - Install the Components:; firmly; Install the Waterway:; completely

4 1063864-AN2-E 17/02/12 Install the Watertile ShowerheadPrepare the Housing: 1. Position the housing so that the back of the leak shield is facing you. 2. Apply a bead of silicone sealant in the groove around the outside of the housing. Do not apply silicone sealant in or near the weep hole. 3. All...

Kohler Manuals