Kohler 4737-0- Installation Manual
Kohler 4737-0– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Do not immerse or flush
- Page 3 – Prepare Electrical Connections; This product is factory equipped with a specific electrical; Cover Screw; Temporary Connection; Grounding Pin
- Page 4 – Unless the cover screw is grounded through the house; Prepare the Toilet; If applicable, remove the existing toilet seat.
- Page 5 – Install the Mounting Plate; Inspect the toilet mounting holes for threaded inserts. Follow; For Toilets with Threaded Inserts; For All Other Installations; Position the mounting plate over the mounting holes on the bowl.; Bolt; Threaded Inserts
- Page 7 – Complete the Installation; Do not push or pull; Thick Hose
- Page 8 – Installation Checkout; Proceed to the; Power Button
- Page 9 – Guide d’installation; Outils et matériels; Ce produit doit être mis à la masse et doit; Clé à molette
- Page 11 – Préparer les connexions électriques; Ce produit doit être mis à la terre et doit; Adaptateur; Connexion temporaire
- Page 12 – Ne pas brancher dans le siège avant l’instruction de le faire.; Connexion préférable; A moins que la vis du couvercle soit mise à la terre à travers
- Page 13 – Installer la plaque de fixation; Inspecter les orifices de fixation des W.C. afin d’y; Pour toutes les autres installations; Insertions filetées
- Page 15 – Installer le siège; Pour toutes les installations; Retirer le siège en; À l’aide d’une clé à molette, serrer entièrement les écrous.; Plaque de montage
- Page 16 – Terminer l’installation; AVERTISSEMENT : Risque d’endommagement du matériel.; Utiliser des précautions afin de ne pas fausser les pas ou trop; Tuyau épaisse
- Page 17 – Vérification de l’installation; Bouton de marche
- Page 18 – Guía de instalación; Herramientas y materiales; ADVERTENCIA: Riesgo de descarga eléctrica.
- Page 20 – Prepare las conexiones eléctricas; Este producto tiene que conectarse a; Adaptador; Conexión provisional
- Page 21 – Prepare el inodoro
- Page 22 – Instale la placa de montaje; Inspeccione los insertos roscados de los orificios de fijación; Para inodoros con insertos roscados; Insertos roscados
- Page 24 – Instale el asiento; Para todas las instalaciones
- Page 25 – Termine la instalación; ADVERTENCIA: Riesgo de daños a la propiedad.; Tenga cuidado de no dañar las roscas ni apretar demasiado; Manguera gruesa
- Page 26 – Verificación de la instalación; Proceda a las secciones; Botón de encendido
Installation Guide
Toilet Seat with Bidet Functionality
and Tank Water Heater
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México (e.j.
K-12345
M
)
Français, page “Français-1”
Español, pagina “Español-1”
K-4737
1097712-2-A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Tools and Materials Before You Begin WARNING: Risk of electric shock, fire, or personal injury. This product must be grounded and connected only to adedicated, nominal 120 VAC, 60 Hz circuit protected by aminimum 15 A Ground-Fault Circuit-Interrupter (GFCI) orResidual Current Device (RCD). If the pr...
1. Prepare Electrical Connections WARNING: Risk of electric shock, fire, or personal injury. This product must be grounded and connected only to adedicated, nominal 120 VAC, 60 Hz circuit protected by aminimum 15 A Ground-Fault Circuit-Interrupter (GFCI) orResidual Current Device (RCD). If the produ...
Prepare Electrical Connections (cont.) Preferred Connection Determine the electrical outlet location. The electrical outletshould be located within 12 ″ (30.5 cm) of the toilet to accommodate the length of the power cord. An extension cordcannot be connected to the seat’s power cord. Route the elect...
