Page 2 - Table of Contents
Table of Contents Part No. 1H9613 June 1997 i Table of Contents About this Guide .................................................................................................. vii 1 Feature Overview .............................................................................................. 1-...
Page 8 - About this Guide; Using this Guide
About this Guide Part No. 1H9613 June 1997 vii About this Guide This guide provides information about installing and configuring the KODAK Network Interface Card (Network Interface Card) with thefollowing printers: • KODAK XLS 8400 PS Printer • KODAK XLS 8600/8600 PS Printer • Kodak Digital Science ...
Page 10 - Feature Overview; Network Interface Card Features; The Network Interface Card has the following features:
Feature Overview Part No. 1H9613 June 1997 1-1 1 Feature Overview Network Interface Card Features The Network Interface Card connects printers directly to Ethernet™ networks utilizing IPX, AppleTalk, and TCP/IP protocols in support of Novell® NetWare® 3.x, Netware® 4.x, MS-DOS, Windows 3.x, Windows ...
Page 12 - Features of the Network Interface Card with TCP/IP; systems that
Feature Overview Part No. 1H9613 June 1997 1-3 • Supports printing indirectly for AppleTalk networks connected with routers to Ethernet networks. • Supports printing indirectly for AppleTalk networks connected with routers to Ethernet networks. • Supports Apple’s LaserWriter drivers versions 7.1 and...
Page 13 - Network Interface Card/Printer Installation Overview
Feature Overview 1-4 Part No. 1H9613 June 1997 Network Interface Card/Printer Installation Overview Section 1: Determine the network protocol(s) to be used for communicating to the Network Interface Card/printer, the workstation platform(s) that will be used for creating and sending print jobs to th...
Page 14 - Installing the Hardware; Package Contents
Installing the Hardware Part No. 1H9613 June 1997 2-1 2 Installing the Hardware You may choose to have Kodak Service install the Network Interface Card in the printer for a fee. This fee covers hardware installation only; network setup tasks are still your responsibility. If you want to install the ...
Page 15 - Getting Ready to Install the Network Interface Card; Turn off and unplug the printer.
Installing the Hardware 2-2 Part No. 1H9613 June 1997 Getting Ready to Install the Network Interface Card Before you install the Network Interface Card, do the following steps: 1. Write the Ethernet address needed for the installation in the space provided below. It is located on the underside of th...
Page 18 - Making the Jumper Selections; JP1/JP2 - selection of cable connection manually; • For manual selection, lift the jumper for the appropriate
Installing the Hardware Part No. 1H9613 June 1997 2-5 Making the Jumper Selections JP1/JP2 Factory Settings (Both Jumpers On) JP1 and JP2 are two small black jumpers near the right side in the middle of the Network Interface Card. When the card is shipped, each jumper is positioned across both sets ...
Page 20 - Installing the Network Interface Card
Installing the Hardware Part No. 1H9613 June 1997 2-7 See the illustration below for LINK jumper enabled/disabled positions. Installing the Network Interface Card Do the following steps to install and seat the Network Interface Card: 1. Hold the card so that the connector is on the bottom and the ca...
Page 22 - Finishing up; Finish up the installation by closing the printer:
Installing the Hardware Part No. 1H9613 June 1997 2-9 Finishing up Finish up the installation by closing the printer: 1. Grasp the black handles on the back of the printer and slide the back of the printer in. 2. Using the Phillips-head screwdriver, replace the five screws you removed. 3. Attach the...
Page 24 - Installing Software for the Network Interface; Installing Software for the Network Interface Card; KSETUP.EXE for creating a Novell Configuration file.
Installing Software for the Network Interface Part No. 1H9613 June 1997 3-1 3 Installing Software for the Network Interface Card Two diskettes are included in the kit for the Network Interface Card. One is Utilities for Novell NetWare and the other is Utilities for UNIX TCP/IP. Installing Software f...
Page 25 - Windows NT; The contents of the diskette include:; System V UNIX
Installing Software for the Network Interface Card 3-2 Part No. 1H9613 June 1997 Installing Software to Configure the Network Interface Card for TCP/IP Windows NT It is not necessary to install software to use the Network Interface Card with Windows NT systems. Configuring printers on specific NT pl...
Page 26 - Network Printer Parameters; Modifying Printer Parameters
Network Printer Parameters Part No. 1H9613 June 1997 4-1 4 Network Printer Parameters This section discusses parameters within the printer related to IPX, AppleTalk and TCP/IP network protocols and methods for modifying parameters from both Macintosh and PC platforms. We recommend that you use the d...
Page 27 - Printer Parameters - General
Network Printer Parameters 4-2 Part No. 1H9613 June 1997 NOTE: If you are setting up a Kodak Digital Science TM Desktop Color Proofer 9000, refer to the user’s guide for the Network Interface Card shipped with the proofer for specific instructions on using the operator control panel. 1. Press Setup/...
Page 29 - Primary/Preferred Server
Network Printer Parameters 4-4 Part No. 1H9613 June 1997 2. Press until SETUP: PORTS appears. 3. Press Setup/Select to access the SETUP: PORTS submenu. 4. Press until PORTS: IPX appears. 5. Press Setup/Select to access the list of frametypes. 6. Press until the appropriate frametype appears. The cur...
Page 30 - Primary Server For PostScript Printers; NOTE: The primary server name is case sensitive.; Primary Server for Raster Printers
Network Printer Parameters Part No. 1H9613 June 1997 4-5 • RSSERVER.EXE for defining a primary server with the printer in Raster mode. • CNTL_D file must be appended to the configuration files that are downloaded through the parallel printer port. If a Macintosh system is available on the network, t...
Page 31 - Printer Parameters - AppleTalk; Utilities For Printers in PostScript Mode
Network Printer Parameters 4-6 Part No. 1H9613 June 1997 2. Respond to the prompts from the program. An output file named RSSERVER.RS is created. 3. Send the file to the printer through a port such as the parallel port. The following command is one example of sending the file to the printer when usi...
Page 32 - Utilities For Printers in Raster Mode; AppleTalk Zone; Make sure the printer is in PostScript mode.
Network Printer Parameters Part No. 1H9613 June 1997 4-7 Utilities For Printers in Raster Mode Kodak Raster Printer Utility— Macintosh utility used to rename the printer in Raster mode. This is the printer name as it appears when using the specific printer’s export module in conjunction with Adobe P...
Page 34 - AppleTalk Phase; Changing the Phase
Network Printer Parameters Part No. 1H9613 June 1997 4-9 AppleTalk Phase Default AppleTalk names are the equivalent of specific printer product names: Default: Phase 2 Optional: Phase 1 Changing the Phase NOTE: If you are setting up a Kodak Digital Science TM Desktop Color Proofer 9000, refer to the...
Page 35 - IP Address
Network Printer Parameters 4-10 Part No. 1H9613 June 1997 6. Press until “ETHERTALK:VERSION” appears. 7. Press Setup/Select. 8. Press until the version you want appears (VER:1 or VER:2). The currently selected version is indicated by an asterisk (*). 9. Press Setup/Select. 10. Press until “VER:EXIT”...
Page 36 - Assigning the Internet address
Network Printer Parameters Part No. 1H9613 June 1997 4-11 Assigning the Internet address Do the steps below to enter the Internet (IP) address for the card: 1. Press Setup/Select on the display panel when “READY” appears on the panel. 2. Press until “SETUP:PORTS” appears. 3. Press Setup/Select. 4. P...
Page 37 - Desktop
Network Printer Parameters 4-12 Part No. 1H9613 June 1997 9. Press until “TCP/IP:EXIT” appears. 10. Press until “SETUP:EXIT” appears. 11. Press Setup/Select. NOTE: If you are setting up a Kodak Digital Science TM Desktop Color Proofer 9000, refer to the User’s Guide for the Network Interface Card th...
Page 38 - Installing the Software for Kodak Printers; Printing in PostScript and Raster Modes
Installing the Software for Kodak Printers Part No. 1H9613 June 1997 5-1 5 Installing the Software for Kodak Printers The software referred to here is the software that comes with every printer and not the software that comes with the Network Interface Card. Refer to the specific sections for instru...
Page 39 - Printing in Raster Mode; For printers that only print in Raster mode such as the
Installing the Software for Kodak Printers 5-2 Part No. 1H9613 June 1997 Printing in Raster Mode For printers that only print in Raster mode such as the Kodak Digital Science 8650 Color Printer, you need only install the Export Module for Adobe Photoshop.
Page 40 - Novell NetWare; NOTE: It is not necessary to install software to use the Network; Novell NetWare - Overview
Novell NetWare Part No. 1H9613 June 1997 6-1 6 Novell NetWare Network Interface Card/Printer Installation Overview Section 1: Determine the network protocol(s) to be used for communicating to the Network Interface Card/printer, the workstation platform to be used for creating and sending print jobs ...
Page 41 - Novell NetWare IPX - Overview; Novell AppleTalk Advantages over Novell IPX
Novell NetWare 6-2 Part No. 1H9613 June 1997 With NetWare, the printer operates as a print server and reads requests from NetWare servers. The printer can service 16 queues on 16 file servers and poll successive queues every second. You can print to the printer with standard Novell print utilities s...
Page 42 - Novell NetWare IPX - Printer Parameters; NOTE: For printers in PostScript mode, make a test print and
Novell NetWare Part No. 1H9613 June 1997 6-3 NOTE: Novell AppleTalk only recognizes the printer when it is in PostScript mode. Raster mode printing cannot be accommodated. You must set up an IPX queue to support both PostScript and Raster mode printing. Novell NetWare - IPX - 3.x/4.x Servers Novell ...
Page 44 - Creating Novell NetWare Print Servers and Queues
Novell NetWare Part No. 1H9613 June 1997 6-5 NetWare 4.X: <printserver> <printserver> is defined by combining the letter K with the last six digits in the printer’s Ethernet Network Interface Card address. For example, if your printer’s Network Interface Card Ethernet address is 00:40:C8...
Page 45 - Defining the Network Interface Card as a Print Server; At the PCONSOLE main menu, press
Novell NetWare 6-6 Part No. 1H9613 June 1997 The following example creates a print server: ps1 (K123458 for NetWare 4.x) and a queue: lp1 on the server: raisa. You could create subsequent queues on raisa that use the same print server, ps1. The printer can serve multiple queues on any server. Defini...
Page 46 - Defining Novell NetWare Print Queues
Novell NetWare Part No. 1H9613 June 1997 6-7 4. Click on Insert to create a print server. 5. Enter the name for the print server. The name must be the same one you used as <printserver> when running KSETUP to set up the configuration file. For NetWare 3.X,you might enter something like PS1. Fo...
Page 48 - Printing from Multiple Servers; Do the following steps to print from more than one file server:; Setting up Notify Lists
Novell NetWare Part No. 1H9613 June 1997 6-9 Printing from Multiple Servers Do the following steps to print from more than one file server: 1. Use the Change Current File Server menu option in PCONSOLE to change to another server. 2. Define the printer as a print server (as described previously). 3....
Page 49 - Novell NetWare - AppleTalk; NOTE: Novell AppleTalk only recognizes the printer when it is in; Novell NetWare - AppleTalk - Printer Parameters; NOTE: You cannot print in Raster mode using ATPS.
Novell NetWare 6-10 Part No. 1H9613 June 1997 Novell NetWare - AppleTalk If Novell’s AppleTalk Print Services (ATPS) is not already in use, consult the Novell CD-ROM on-line documentation for setup and use of ATPS. To use ATPS for the Kodak printer, an ATPS.CFG file must be edited appropriately to d...
Page 52 - Windows 3.x Workstations; Section 2: Install the Network Interface Card in the Kodak printer.; NOTE: For Windows 3.x a network server queue must be; Printer Setup for Selecting a Network Queue; Find the drive or directory where the Kodak PostScript driver
Part No. 1H9613 June 1997 7-1 Windows 3.x Workstations 7 Windows 3.x Workstations Section 1: Determine the network protocol(s) to be used for communicating to the Network Interface Card/printer, the workstation platform(s) that will be used for creating and sending jobs to the printer and any server...
Page 54 - Eliminating Extra/Error Pages
Part No. 1H9613 June 1997 7-3 Windows 3.x Workstations 2. Set up a PC-NFS server as described in the PC-NFS installation guide. Make sure that the server runs the PC-NFS daemon rpc.pcnfsd. 3. Set up a printer on the PC-NFS server as described in the sections in this guide on UNIX systems. 4. Edit th...
Page 56 - Windows 95 Workstations; NOTE: For Windows 95 a network server queue must be
Windows 95 Workstations Part No. 1H9613 June 1997 8-1 8 Windows 95 Workstations Network Interface Card/Printer Installation Overview Section 1: Determine the network protocol(s) to be used for communicating to the Network Interface Card and the printer, the workstation platform(s) that will be used ...
Page 57 - Initial Configuration Steps
Windows 95 Workstations 8-2 Part No. 1H9613 June 1997 Initial Configuration Steps On a Windows 95 workstation, any user may configure a printer and select a server print queue to use for printing. Do the following steps to configure your printer. If you encounter any problems or confusion, refer to ...
Page 65 - Setting the Printer Properties
Windows 95 Workstations 8-10 Part No. 1H9613 June 1997 A window opens asking you to select the drive that contains the CD-ROM. 14. Click on Browse if you need to locate the directory. Click on OK. NOTE: We recommend that you install all the files. If you have the option to skip a file, do so only if...
Page 68 - Windows NT 3.51Workstations and Servers; NOTE: It is not necessary to install Network Interface Card; Network Service and Protocol Installation
Windows NT 3.51Workstations and Servers Part No. 1H9613 June 1997 9-1 9 Windows NT 3.51Workstations and Servers Network Interface Card/Printer Installation Overview Section 1: Determine the network protocol(s) to be used for communicating to the Network Interface Card, the printer, the workstation p...
Page 69 - NT Workstations and Servers:; Network Services/Protocols; System Support; AppleTalk
Windows NT 3.51Workstations and Servers 9-2 Part No. 1H9613 June 1997 NT Workstations and Servers: Network Services/Protocols To verify or install the proper network service/protocol, select “NETWORK CONTROL PANEL” and then either “SERVICES” or “PROTOCOLS” from the Network menu. Select “SERVICES” fo...
Page 70 - Raster Mode Considerations; NOTE: The export module for NT only supports Raster mode; Windows NT Servers and Workstations
Windows NT 3.51Workstations and Servers Part No. 1H9613 June 1997 9-3 Raster Mode Considerations NOTE: The export module for NT only supports Raster mode printing using TCP/IP or IPX (Novell) queues. NT AppleTalk printing will not recognize the printer in Raster mode because the printer advertises i...
Page 71 - Indirect Printing (Printing through a Server)
Windows NT 3.51Workstations and Servers 9-4 Part No. 1H9613 June 1997 When a printer is shared on a server, do not select other Windows systems that will use the queue. Drivers should be installed locally on all systems serviced by a server. You may encounter problems when trying to download copies ...
Page 72 - Configuring for Workstations and Servers; The Print Manager window opens.; Select “Create Printer.”
Windows NT 3.51Workstations and Servers Part No. 1H9613 June 1997 9-5 Configuring for Workstations and Servers With Windows NT 3.51 Workstation and Server, an administrator must configure the printer and select a mechanism to use for printing.If necessary, refer to README files that come with instal...
Page 75 - Direct Printing; The Print Destinations window opens.
Windows NT 3.51Workstations and Servers 9-8 Part No. 1H9613 June 1997 Direct Printing LPR Port (TCP/IP) Configuration Do the procedure on Page 10-2 to install the software for the Network Interface Card. Do the following steps to set up a system to print directly to a printer using TCP/IP: 1. From t...
Page 76 - AppleTalk Configuration
Windows NT 3.51Workstations and Servers Part No. 1H9613 June 1997 9-9 • Name of Printer on that Machine (ps). NOTE: This entry MUST be ‘ps’ corresponding to the internal ‘PS’ (Print Server) queue name on the printer’s Network Interface Card. 4. Click on OK in the remaining Create Printer screens. Th...
Page 80 - 0 Windows NT 4.0 Workstations and Servers; Chapter 3: Install the software for the Network Interface Card.
Windows NT 4.0 Workstations and Servers Part No. 1H9613 June 1997 10-1 10 Windows NT 4.0 Workstations and Servers Network Interface Card /Printer Installation Overview Section 1: Determine the network protocol(s) to be used for communicating to the Network Interface Card/printer, the workstation pla...
Page 81 - Windows NT 4.0 Workstations and Servers; NT Workstations and Servers
Windows NT 4.0 Workstations and Servers 10-2 Part No. 1H9613 June 1997 NT Workstations and Servers Network Services/Protocols To verify or install the proper network service/protocol, select “NETWORK CONTROL PANEL” and then either “SERVICES” or “PROTOCOLS” from the Network menu. Select “SERVICES” fo...
Page 84 - Configuring Workstations and Servers
Windows NT 4.0 Workstations and Servers Part No. 1H9613 June 1997 10-5 Configuring Workstations and Servers For Windows NT workstations or servers, an administrator must configure the printer and select a mechanism for printing. If necessary, refer to the README files that come with the installation...
Page 85 - OR
Windows NT 4.0 Workstations and Servers 10-6 Part No. 1H9613 June 1997 Configuring Your Printer for an LPR Port (TCP/IP) NOTE: To configure your server or workstation to print directly to the printer from AppleTalk, go to Step 9. 4. From the “Add Printer Wizard” screen: Click on Add Port if you are ...
Page 87 - Configuring Your Printer for AppleTalk
Windows NT 4.0 Workstations and Servers 10-8 Part No. 1H9613 June 1997 Configuring Your Printer for AppleTalk NOTE: NT AppleTalk supports printing in PostScript mode only. Use TCP/IP queues to support both PostScript and Raster mode printing. 10. Click on Add Port in the Add Printer Wizard window. T...
Page 89 - Installing the Kodak Printer Driver
Windows NT 4.0 Workstations and Servers 10-10 Part No. 1H9613 June 1997 Installing the Kodak Printer Driver Do the following steps to install the Kodak printer driver. From the Add Printer Wizard window: 1. Select “Kodak” from the list of Manufacturers. Click on Have Disk. NOTE: Printer drivers prov...
Page 93 - Kodak Driver - Copying Files/ Files Needed
Windows NT 4.0 Workstations and Servers 10-14 Part No. 1H9613 June 1997 The Add Printer Wizard window to print a test page opens. 9. Click on Yes and then on Finish. NOTE: If errors are encountered at the printer display panel (load paper, ribbon) when a test page is generated, check the Printer Pro...
Page 94 - Creating a Print Queue for Indirect Printing; Select “Printer Properties.”
Windows NT 4.0 Workstations and Servers Part No. 1H9613 June 1997 10-15 Upon installation of the driver software, the newly-configured printer appears in the Print Manager window. Creating a Print Queue for Indirect Printing To configure a server to provide a print queue for indirect printing from a...
Page 95 - Selecting a Print Queue for Indirect Printing
Windows NT 4.0 Workstations and Servers 10-16 Part No. 1H9613 June 1997 Selecting a Print Queue for Indirect Printing Follow the steps in “Creating a Print Queue for Indirect Printing” to configure a workstation to print from LPT1. This procedure installs the driver locally on a workstation. Do not ...
Page 96 - Printer Properties and Document Defaults; Select “Properties” from the file menu.
Windows NT 4.0 Workstations and Servers Part No. 1H9613 June 1997 10-17 Printer Properties and Document Defaults To avoid printing errors, set up the appropriate printer characteristics by doing the following: 1. From the Printer’s window, select the Kodak printer you configured. 2. Select “Properti...
Page 98 - Macintosh Workstations; 1 Macintosh Workstations; You should use AppleTalk for Macintosh systems.; Section 2: Install the hardware in the Kodak printer.; Note: There is no software installation necessary for using
Macintosh Workstations Part No. 1H9613 June 1997 11-1 11 Macintosh Workstations Network Interface Card/Printer Installation Overview Section 1: Determine the network protocol(s) to be used for communicating to the Network Interface Card, printer, workstation platform(s) that will be used for creatin...
Page 100 - UNIX Workstations and Servers; 2 UNIX Workstations and Servers; The only pertinent parameter for UNIX is the IP Address.; UNIX BSD Systems
UNIX Workstations and Servers Part No. 1H9613 June 1997 12-1 12 UNIX Workstations and Servers Network Interface Card/Printer Installation Overview Section 1: Determine the network protocol(s) to be used for communicating to the Network Interface Card and the printer, the workstation platform(s) that...
Page 101 - Direct Printing/Spooling
UNIX Workstations and Servers 12-2 Part No. 1H9613 June 1997 The reference file for lpr is /etc/printcap. This file contains a description of the printer, the name of the directory where the job is spooled, the accounting file for the printer, the error file for the printer, and the filters used for...
Page 102 - Printer Installation/Configuration; Find and load the Utilities for the TCP/IP diskette.
UNIX Workstations and Servers Part No. 1H9613 June 1997 12-3 Printer Installation/Configuration Automatic Installation The installation script on the TCP/IP utilities diskette is for UNIX systems only. The disk is in UNIX tar format. The install script is inappropriate for use on a PC or Macintosh s...
Page 103 - ls; Manual Installation
UNIX Workstations and Servers 12-4 Part No. 1H9613 June 1997 5. List the files you loaded by entering the command ls 6. Run the installation script by entering the command ./install.sh 7. Respond to the script's prompts. On BSD UNIX systems the installation script creates an entry in the /etc/printc...
Page 104 - Printcap File Entries
UNIX Workstations and Servers Part No. 1H9613 June 1997 12-5 /etc/printcap File Edit the /etc/printcap file if necessary. The /etc/printcap file contains entries separated by colons (:). If an entry needs to continue on the next line, enter a backslash (\) at the end of the line. Make sure that the ...
Page 105 - Printer Status
UNIX Workstations and Servers 12-6 Part No. 1H9613 June 1997 Printer Status To check that the printer is up and responding on the network, use the ping command: ping <host printer name> If the printer called 8650 is responding on the network, the response is: 8650 is alive If there is a proble...
Page 106 - Multiple Queues
UNIX Workstations and Servers Part No. 1H9613 June 1997 12-7 NOTE: On some systems, the ping command continuously displays messages such as: 64 bytes from 8650 (192.185.2.3) icmp_seq=0 time=3ms To discontinue the ping command, press delete or Ctrl-C. For more information about the printer status, us...
Page 107 - System V Systems; IMPORTANT: Before you perform any network setup procedures,; Using the command line method; Enter the following command to add a new printer:
UNIX Workstations and Servers 12-8 Part No. 1H9613 June 1997 System V Systems SUN Solaris Systems If you have problems using the install script, do the following procedure to use lpd support from Solaris-based System V UNIX systems. These steps are similar for other System V systems. IMPORTANT: Befo...
Page 108 - Using the admintool; ocmrcmodel
UNIX Workstations and Servers Part No. 1H9613 June 1997 12-9 5. Enter the following command to start the print scheduler: /usr/lib/lpsched 6. Enable the printer by entering the following command: enable <printername> 7. Enter the following command to make the printer accept connection: accept ...
Page 110 - Printing; Printing Modes - PostScript and Raster; Kodak Printer Software
Printing Part No. 1H9613 June 1997 13-1 13 Printing Printing Modes - PostScript and Raster The Kodak printers supported are of 2 types. Models with the PS extension support both PostScript and Raster printing modes. Models with no PS extension support Raster mode printing only. Printing in PostScrip...
Page 111 - Changing between PostScript and Raster Printing Modes
Printing 13-2 Part No. 1H9613 June 1997 Changing between PostScript and Raster Printing Modes NOTE: If you are setting up a Kodak Digital Science™ Desktop Color Proofer 9000, you may wish to refer to the user’s guide for the Network Interface card shipped with the proofer for instructions on using t...
Page 112 - PostScript Mode Printing; Save the file, and try printing it again.; Windows 95 and Windows NT 3.51Systems
Printing Part No. 1H9613 June 1997 13-3 PostScript Mode Printing Printing from Microsoft Windows You can print from Microsoft Windows applications using FILE > PRINT. Be sure to use FILE > PAGE SETUP to setup or verify pertinent printing parameters such as paper size and ribbon type. Also, che...
Page 113 - Printing from DOS; NPrint; Use NPRINT to print as shown in the following example:; Copy; Use COPY to print to an LPT port redirected to a network port.; COPY myfile LPT1; Printing form Macintosh Systems
Printing 13-4 Part No. 1H9613 June 1997 Printing from DOS NPrint Print to the printer as if it were any other Novell print server. For example, use the Novell CAPTURE command to redirect one of the LPT ports to a queue serviced by the Network Interface Card. If the file server is named raisa and the...
Page 114 - Printing from BSD UNIX Systems; An example for printing a file:; Printing from UNIX System V Systems
Printing Part No. 1H9613 June 1997 13-5 Printing from BSD UNIX Systems Kodak does not develop PostScript drivers or export modules for UNIX platform(s). However, other vendors do provide solutions in support of Kodak printers. These solutions support various UNIX/Windows/Macintosh platforms and inte...
Page 115 - Printing from VMS Systems; Printing with MultiNetTM on a VMS host; Command
Printing 13-6 Part No. 1H9613 June 1997 Some common System V print commands are listed below. Printing from VMS Systems Printing with MultiNet™ on a VMS host The Network Interface Card works with a MultiNet stream queue on a VMS host. Invoke MultiNet's printer configuration utility (PCU) to add a VM...
Page 116 - Raster Mode Printing; Network; UNIX Platforms
Printing Part No. 1H9613 June 1997 13-7 Raster Mode Printing Windows and Macintosh Platforms Kodak only supports printing in Raster mode through the use of Kodak printer specific export modules for Adobe Photoshop. To select the printer in Raster mode, select “Export” from the File menu to open a Se...
Page 118 - Troubleshooting; 4 Troubleshooting; Verifying Standalone Printer Functions; Is there an error message displayed on the printer?
Troubleshooting Part No.1H9613 June 1997 14-1 14 Troubleshooting If you are having trouble printing, first verify that the standalone printer with no network interface connection operates correctly. Secondly, verify that the printer is configured correctly when connected to your network. If necessar...
Page 119 - Verify Network Connectivity; NOTE: Check the yellow LED only if you have 10BaseT cabling.; Verify Printer/Network Parameters; Make a PostScript test if you have not already done so.
Troubleshooting 14-2 Part No. 1H9613 June 1997 Verify Network Connectivity 1. When the printer finishes initialization and the front display/control panel displays the message “READY,” check that the LEDs on the back of the printer operate correctly. NOTE: Check the yellow LED only if you have 10Bas...
Page 120 - Verify Application and Printer Parameters
Troubleshooting Part No.1H9613 June 1997 14-3 that are downloaded to the printer are effective when you restart the printer. • You may want to reset the printer to factory defaults from the printer’s front control/display panel. Refer to ”Printer Parameters” for instructions on resetting the printer...
Page 122 - NT Installations
Troubleshooting Part No.1H9613 June 1997 14-5 • Check to see if the print queue has been disabled. If the queue is enabled but your job is not in it, a workstation problem has prevented the job from entering the print queue. Check the workstation. • Check the print queue contents using the PCONSOLE ...
Page 123 - AppleTalk Installations
Troubleshooting 14-6 Part No. 1H9613 June 1997 We recommend that you install the printer driver and/or the export module on each server and workstation on your network. When you set up the servers for sharing, install only the software relevant to the operating system for the server. AppleTalk Insta...
Page 124 - Raster Mode
Troubleshooting Part No.1H9613 June 1997 14-7 - If the printer is installed on a network with multiple zones, check the other zones for the printer. The printer will boot up to the default zone that is supplied by the network router. - Make sure that the printer has been selected in the Chooser. - I...
Page 125 - The printer appears to be ready, but you cannot print; If the following message appears, your system does not use NIS:; The IP address is correct, but you cannot print.; Enter the ping command and the host name:
Troubleshooting 14-8 Part No. 1H9613 June 1997 • Do the initial steps listed in this troubleshooting section for the printer, connectivity parameters, and applications if you have not already done so. • Check the test print to verify that the preferred server is correct. In the examples below, 8650 ...
Page 126 - You can ping the printer but cannot print.; The problem is with the; You can only print small files.; Telnet; Monitoring Network Interface Card Activity with Telnet
Troubleshooting Part No.1H9613 June 1997 14-9 No answer from <printername> If you are using the 10BaseT port and have nonstandard cabling such as AT&T or HP STARLAN, you may need to disable link integrity. Refer to "Disabling the Link Test Integrity Function" in the “Installing the...
Page 128 - Getting Help; Retailer
Troubleshooting Part No.1H9613 June 1997 14-11 route for BINFORD = 0 60 2f bf 35 8b Getting route for D294-FPN1 route for D294-FPN1 = 0 60 2f bf 35 8b . . . Getting route for HSD_SAA_1 route for HSD_SAA_1 = 0 60 2f bf 35 8b Found servers: 0: BINFORD 1: D294-FPN2 2: D294-FPN1 . . . 23: HSD_SAA_1 Tryi...
Page 129 - Kodak Customer Assistance Center; Contact the Kodak Customer Assistance Center if you:; Kodak web Site
Troubleshooting 14-12 Part No. 1H9613 June 1997 Kodak Customer Assistance Center Contact the Kodak Customer Assistance Center if you: • have questions about your warranty. • want to know where to get service. • have questions about software/printer interaction. In the U.S., call 1 800 235 6325 from ...
Page 130 - Index
Part No. 1H9613 June 1997 Index-1 Index A AppleTalk installing software for, 3-1printer parameters with, 4-6selecting a PostScript printer 11-2setting up network printing, 11-2 AppleTalk Name defaults, 4-6for printers in PostScript mode, 4-6for printers in Raster mode, 4-7 AppleTalk Phase changing, ...