Kodak DCS 465 - Manuals - manualsarea.com

Page 2 - ii

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii

Page 3 - iii; WARRANTY; Warranty Time Period

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii WARRANTY KODAK Professional DCS 465 Digital CameraBack THIS WARRANTY APPLIES TO EQUIPMENT PURCHASED IN THEUNITED STATES. Warranty Time Period Kodak warrants your KODAK Professional DCS 465 Digital Camera Backto be free from malfunctions a...

Page 4 - iv; Limitations

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Limitations Warranty service will not be provided without return of the WarrantyRegistration card or dated proof of purchase. Please return the WarrantyRegistration card within 30 days of purchase. As a condition of warranty service, befor...

Page 5 - In other countries, call your nearest Kodak representative.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Outside the United States In countries other than the United States, the terms of this warranty maybe different. Unless a specific Kodak warranty is communicated to thepurchaser in writing by a Kodak company, no other warranty or liabilitye...

Page 6 - LICENSE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi EASTMAN KODAK COMPANY Software License Agreement YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONSBEFORE OPENING THE DISKETTE PACKAGE(S). OPENING THE DISKETTEPACKAGE(S) INDICATES YOUR ACCEPTANCE OF THESE TERMS AND CONDI-TIONS. I...

Page 7 - vii; TERM

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii You must reproduce and include the copyright notice on any copy of thesoftware. YOU MAY NOT USE, COPY OR TRANSFER THE SOFTWARE, OR ANYCOPY, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDEDFOR IN THIS LICENSE. IF YOU TRANSFER POSSESSION O...

Page 8 - viii; LIMITATIONS OF REMEDIES; Kodak’s entire liability and your exclusive remedy shall be:

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TOQUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. IFTHE SOFTWARE PROVES DEFECTIVE, YOU (AND NOT KODAK ORYOUR DEALER) ASSUME THE ENTIRE COST OF ALL NECESSARYSERVICING, REPAIR, ...

Page 9 - ix; GENERAL; This Agreement will be governed by the laws of the State of New York.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix GENERAL You may not sublicense, assign, or transfer the license or the software,except as expressly provided in this Agreement. Any attempt otherwise tosublicense, assign, or transfer any of the rights, duties, or obligationshereunder is p...

Page 10 - Follow Instructions — Follow all operating and use instructions.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . x Important Safeguards andPrecautions The exclamation point in an equilateral triangle is in-tended to alert the user to the presence of importantoperating and maintenance (servicing) instructions inthe literature accompanying the equipment. ...

Page 11 - xi

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi and serious damage to the equipment. Use only with a stable cart,stand, bracket, or table.  Cleaning — (Refer to chapter 9 for directions on cleaning the imagerin the camera back.) Unplug the KODAK Professional DCS 465Digital Camera Back ...

Page 12 - xii

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii will use the DCS 465 Camera Back as the only external deviceattached to a Macintosh IIfx or PowerBook computer (refer to chapter4). Use only the SCSI cables supplied with the DCS 465 Camera Backto attach the camera back or other periphera...

Page 13 - xiii; If the equipment has been exposed to rain or water.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii PCMCIA cards to normalize within the specified environmental rangesbefore operation. (Third-party, optional PCMCIA cards may havemore restrictive operating temperature and humidity ranges. Refer tothe specifications for the cards you use...

Page 14 - xiv; Battery — Important Warnings

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv You can connect the camera back to a computer with or without aPCMCIA card in the camera back. Once the camera back is con-nected to a computer, you can insert/remove a PCMCIA card whilethe camera back and computer are turned on or turned...

Page 15 - xv; A line

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv AC Battery Charger/Adapter — ImportantWarnings  You should operate the equipment only from the type of power sourceindicated on the name plate of the AC battery charger/adapter. A line voltage outside of this range can destroy the AC batt...

Page 16 - xvi; Electromagnetic Emissions; Reorient or relocate the receiving antenna.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi Electromagnetic Emissions This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful inte...

Page 17 - xvii; Assistance Needed; Technical Assistance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii Assistance Needed Source of Assistance You encounter difficulties withhardware, images, or productperformance. Refer to the troubleshooting sections of thismanual: camera back (in chapter 9), PhotoshopMacintosh driver (in chapter 10), an...

Page 18 - Contents; Before You Begin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii Contents 11111 Before You Begin 1-1 Macintosh Computer — Hardware and Software 1-2 Required Computer Hardware 1-2 Required Monitor and Display Card 1-3 Required Systems Software 1-3 Required Applications Software 1-3 SCSI Terminators 1-...

Page 28 - IMPORTANT: Refer to the R; file on the supplied software driver diskette; Required Computer Hardware

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2  Before You Begin G Macintosh Computer — Hardwareand Software The following sections list the required and optional computer hardwareand software needed to run the Kodak Driver for use with Adobe Photo-shop Software on an Apple Macintosh...

Page 29 - Required Monitor and Display Card

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Before You Begin G 1-3 Required Monitor and Display Card A color monitor is required for color work. Your monitor should be atleast 12 inches or larger; the monitor on a PowerBook is also acceptable.(You can not see all of the information b...

Page 31 - Required SCSI Interface; or; Required Systems Software

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Before You Begin G 1-5 Required SCSI Interface ASPI (Advanced SCSI Programming Interface) Windows host adapter suchas those from Adaptec, Inc. running EZ-SCSI 3.0 or later. or SCSI Host Adapter for PCs with AT-style bus (Future Domain No. T...

Page 33 - Optional Printers

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Before You Begin G 1-7 Optional Printers NOTE: In the United States, contact Kodak at 1-800-23-KODAK (1-800-235-6325) for detailed information on printer options and accessories and to obtainordering catalog numbers; in Canada call 1-800-GO...

Page 34 - Optional PCMCIA Hard Disk Card; file on the

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8  Before You Begin G Optional DCS 465 Camera BackEquipment Kodak accessories, for example, PCMCIA cards. Refer to the appendix“Optional Equipment & Spare Parts List” for specific details. Electronic flash and accessories available fro...

Page 35 - Introduction; This chapter includes:

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Introduction G 2-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Introduction This chapter include...

Page 37 - Features; Interface for mechanically and electronically tripped cameras.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Introduction G 2-3 Features The DCS 465 Camera Back, a sealed one-piece unit, incorporates thefollowing features: Camera Sync (4-pin) Elec Cam Trip (3-pin) Shutter Release (5-pin) Flash Sync FRONT VIEW Universal mount Imager(beneath KG5 fil...

Page 41 - Quick Start

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Quick Start G 3-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Quick Start This chapter provides ...

Page 42 - Obtain one or more supported PCMCIA cards.; file supplied; PC customers only: obtain and install — if not already present — a; a. Load the diskette “KODAK Driver for ADOBE PHOTOSHOP

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2  Quick Start G 1. Obtain one or more supported PCMCIA cards. PCMCIA cards are not supplied with the camera back, but are avail-able from Kodak (and elsewhere). The camera back accepts cards thatsupport the PCMCIA “ATA interface. Refer to...

Page 43 - copy the files into the folder with the Photoshop PS P; a. Load the diskette “KODAK Drivers for TWAIN-Compliant

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Quick Start G 3-3 b. Load the diskette “KODAK DCS 465 Calibration (CAL) File: Macintosh.” The diskette contains a calibration file whosefilename is your camera back serial number followed by a“.cal” suffix. For example, if the serial number...

Page 44 - Remove the imager cover from the camera back by inserting your

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4  Quick Start G 5. Remove the imager cover from the camera back by inserting your thumb beneath a corner of the cover and separating it from thecamera back. Be extremely careful while the imager is exposed, and be certain toretain the cov...

Page 45 - Mount the camera back to your camera as shown below for a typical

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Quick Start G 3-5 6. Mount the camera back to your camera as shown below for a typical configuration. CAMERA BACK ADAPTER YOUR CAMERA

Page 48 - Connect the camera back to your Computer.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8  Quick Start G 8. Attach the supplied AC battery charger/adapter. Connect the adapter to a source supplying power within the range onits label, and to the connector on the lower left corner of the cameraback. The first time it is used, a...

Page 49 - Run Photoshop, choose F

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Quick Start G 3-9 12. Update the camera back firmware. This onetime action ensures that the most current control commands(firmware) are loaded in the camera back. A. Macintosh Run Photoshop, choose F ILE , A CQUIRE , KODAK DCS 465. The driv...

Page 50 - Move images from the camera system to the computer.; or M

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10  Quick Start G 15. (Optional) Record sound. Hold the back of the camera back about six inches from your mouth(the microphone is behind four small holes centered at the top of thecamera back). Press and hold the record button (to the rig...

Page 51 - Preparing for Use with Mac; Connect the DCS 465 Camera Back to your camera.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparing the DCS 4...

Page 52 - Access the driver for Adobe Photoshop Software.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2  Preparing for Use with Mac G  Install the driver for Adobe Photoshop Software and the camera backcalibration file (CAL) on your Macintosh computer.  Insert (and remove) your PCMCIA card into the DCS 465 CameraBack.  Access the driver...

Page 53 - Remove the imager cover from the camera back by inserting a thumb

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-3 Connecting the DCS 465 Camera Backto Your Camera Follow the steps in this section to connect the DCS 465 Camera Back toyour camera. CAUTION: As you complete these steps handle the cameraback — and especially...

Page 54 - Mount the camera back to your camera as shown below for a typical; Follow part A of this step if you are working with a mechanically

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4  Preparing for Use with Mac G 2. Mount the camera back to your camera as shown below for a typical configuration; first mount the adapter to your camera, and then mountthe camera back to the adapter. CAMERA BACK ADAPTER YOUR CAMERA 3. Fo...

Page 57 - Charging the Battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-7 Using the AC Battery Charger/Adapter Keep the following battery considerations in mind as you use the cameraback.  IMPORTANT: Do not attempt to remove the battery; it is not a cus-tomer serviceable part.  ...

Page 58 - Follow these steps to charge the battery.; Plug the appropriate end of the power cord into the AC battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8  Preparing for Use with Mac G Follow these steps to charge the battery. 1. Locate the AC battery charger/adapter and power cord supplied with the camera back. To camera back AC BATTERY CHARGER/ADAPTER POWER CORD To wall outlet To AC batt...

Page 63 - Wake (see illustration below) the DCS 465 Camera Back using one or

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-13 3. Wake (see illustration below) the DCS 465 Camera Back using one or the other of these two methods. A. Operate while connected to the AC battery charger/adapter; the camera back is continually awake in th...

Page 64 - Locate the indented button on the back of the DCS 465 Camera Back

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14  Preparing for Use with Mac G 4. Locate the indented button on the back of the DCS 465 Camera Back labeled “SCSI ID.” ISO SCSI ID CARD BUSY SCSI ID button

Page 65 - Press the SCSI ID button once with your fingertip or other blunt

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-15 5. Press the SCSI ID button once with your fingertip or other blunt object; this action wakes SCSI mode. The characters “SCSI” (called theSCSI indicator), as well as a single value from 0 to 7, “PC,” and “P...

Page 66 - While “SCSI” still appears on the LCD, you change the current SCSI

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16  Preparing for Use with Mac G 6. While “SCSI” still appears on the LCD, you change the current SCSI ID by pressing the SCSI ID button repeatedly. The ID rotates throughthe values 0 to 7, “PC,” and “PP.” Stop when you have the SCSI IDyou...

Page 67 - Making the SCSI Connection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-17 Making the SCSI Connection NOTE: Leave the camera back connected to your camera while you make thisconnection. Refer to chapter 9 for an explanation of supported configurations. The DCS 465 Camera Back is a...

Page 68 - DCS 465 Camera Back as the Sole SCSI Device

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18  Preparing for Use with Mac G Two sets of instructions follow, depending on whether or not otherexternal SCSI devices are connected to your computer. NOTE: You may need to obtain a SCSI terminator to complete these steps if otherexterna...

Page 69 - Connect the AC battery charger/adapter to the camera back as de-; Attach one 25-pin connector to the SCSI port on the back of the

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-19 3. Connect the AC battery charger/adapter to the camera back as de- scribed earlier in this chapter. Although this step is optional, werecommend it whenever the camera back is connected to a computer. 4. Se...

Page 70 - the back of the DCS 465 Camera Back.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20  Preparing for Use with Mac G 6. Attach the appropriate end of the supplied 25-pin SCSI terminator to the open 25-pin end of the SCSI cable you just attached to yourMacintosh computer. 25-pin Terminator BACK OF MACINTOSH COMPUTER 7. Att...

Page 72 - Turn off the Macintosh PowerBook computer.; SCSI connector on the back of the DCS 465 Camera Back.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22  Preparing for Use with Mac G 1. Turn off the Macintosh PowerBook computer. IMPORTANT: Later when you connect and disconnect the MacintoshPowerBook computer and the DCS 465 Camera Back on a regular basis,make sure the computer is off. S...

Page 73 - For this installation you will need to supply:

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-23 Skip the next sections and continue at “Installing the KODAK Driver forAdobe Photoshop Software (Macintosh) and Calibration File” later in thischapter. C. Follow these steps if no external devices areconnec...

Page 74 - Follow the steps below to complete this connection.; Macintosh IIfx computer.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24  Preparing for Use with Mac G Follow the steps below to complete this connection. SCSI Connector BACK OF MACINTOSH IIfx COMPUTER 25-pin Connector 5 6 7 8 4 1. Turn off the Macintosh IIfx computer. IMPORTANT: Later when you connect and d...

Page 75 - end of the SCSI cable attached to the Macintosh IIfx computer.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-25 4. Attach the 25-pin connector of the 25-pin to 50-pin SCSI cable that you have supplied to the SCSI port on the back of the Macintosh IIfxcomputer. Make sure the connector is well seated by pressing it int...

Page 76 - Turn off the Macintosh computer, and all connected SCSI devices.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26  Preparing for Use with Mac G Multiple SCSI devices are connected to the Macintosh computer in achain. If the DCS 465 Camera Back is one of multiple SCSI devicesconnected to your Macintosh computer, it must be connected as the lastdevic...

Page 77 - Place the DCS 465 Camera Back in a convenient position next to the

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-27 2. Place the DCS 465 Camera Back in a convenient position next to the last device in the SCSI chain of devices connected to your Macintoshcomputer. 3. Connect the AC battery charger/adapter to the camera ba...

Page 78 - B. If there is an external SCSI terminator between the end of a cable

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28  Preparing for Use with Mac G A. If there is an external SCSI terminator on an otherwise empty SCSI connector on the last device, remove it. B. If there is an external SCSI terminator between the end of a cable and a SCSI connector on a...

Page 79 - Attach the supplied 25-pin terminator to the other end of the SCSI

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-29 6. Connect the 50-pin connector to the empty connector on the last SCSI device in the chain. Make sure the connector is well seated by press-ing it into place firmly, and then pinch the thin wire clamps ove...

Page 81 - Select the SCSI cable with the 50-pin connector at one end and the

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-31 4. Select the SCSI cable with the 50-pin connector at one end and the 25-pin connector at the other end. IMPORTANT: Use only the cable supplied with the DCS 465 Camera Back;do not use a substitute cable. 25...

Page 82 - Attach the other end of the SCSI cable to the SCSI connector on the; Continue at the next section.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-32  Preparing for Use with Mac G 6. Attach the other end of the SCSI cable to the SCSI connector on the DCS 465 Camera Back. 25-pin Connector SCSI Connector 7. (Optional) Later, to disconnect the camera back from the Macintosh computer, sh...

Page 83 - If your Macintosh computer is not on, turn it on now after a short

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-33 Installing the KODAK Driver forAdobe Photoshop Software(Macintosh) and the Calibration File NOTE: We assume that you are familiar with Adobe Photoshop; if you are not,refer to the instruction manuals that a...

Page 84 - NOTE: If you do not place these files in the same folder as PS P; will not be able to acquire images.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34  Preparing for Use with Mac G 3. If the diskettes are not locked, lock them by sliding their tabs on the back to reveal a small hole. This will prevent the contents of the diskfrom being changed inadvertently, and may aid in preventing ...

Page 86 - file on the supplied soft-; Inserting a PCMCIA Card

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36  Preparing for Use with Mac G Inserting and Removing a PCMCIACard This section describes how to insert and remove a PCMCIA card. PCMCIAcards are not supplied with the camera back, but are available as optionalequipment. Refer to chapter...

Page 87 - Be certain that the red “Card Busy” light is not blinking before you

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-37 1. Be certain that the red “Card Busy” light is not blinking before you continue. ISO SCSI ID CARD BUSY ISO SCSI ID CARD BUSY CARD BUSY light

Page 88 - While looking at the camera back, open the door on the left edge by; NOTE: As you complete this step, do not be startled when the red

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-38  Preparing for Use with Mac G 2. While looking at the camera back, open the door on the left edge by sliding the door up. ISO SCSI ID CARD BUSY . . . insert/removePCMCIA card here. Slide door up, then . . . 3. NOTE: As you complete this...

Page 90 - Slide the door down over the PCMCIA card compartment.; Removing a PCMCIA Card; Follow these steps to remove a PCMCIA card.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-40  Preparing for Use with Mac G 4. Slide the door down over the PCMCIA card compartment. NOTE: The camera back LCD (see the first figure in the previous step) mayshow “E6,” a code indicating that the PCMCIA card is not formatted. That is ...

Page 91 - CAUTION: As you complete this step, the PCMCIA card is ejected; Remove the card from the camera back by grasping it at the top and

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-41 3. CAUTION: As you complete this step, the PCMCIA card is ejected from the camera back; for that reason, keep your hand in front of thedoor opening to prevent the fragile card from falling out of the camera...

Page 92 - If the DCS 465 Camera Back and your Macintosh computer are not

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-42  Preparing for Use with Mac G Accessing the KODAK Driver forAdobe Photoshop Software(Macintosh) Repeat the steps below each time you want to access the KODAK Driverfor Adobe Photoshop software. 1. If the DCS 465 Camera Back and your Mac...

Page 93 - Pull down the Adobe Photoshop F; menu and choose KODAK DCS; submenu may show

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-43 5. Pull down the Adobe Photoshop F ILE menu and choose KODAK DCS 465 from the A CQUIRE submenu. (The A CQUIRE submenu may show other options.)

Page 94 - (The first time you choose this driver, a file named DCS 465 P; is created in your S

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-44  Preparing for Use with Mac G 6. Wait as the image window appears. (The first time you choose this driver, a file named DCS 465 P REFER - ENCES is created in your S YSTEM F OLDER .) KODAK DCS 465 Digital Camera Back NOTE: Instead of the...

Page 95 - submenu of the Adobe Photoshop F

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-45 Updating DCS 465 Camera BackFirmware The DCS 465 Camera Back incorporates nonvolatile memory that con-tains controls — called firmware — for most features of the camera back.You can update that firmware you...

Page 96 - button of the driver image window. You will; Wait while firmware is copied to the camera back.; Click OK to close the Control Panel and return to the driver image

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-46  Preparing for Use with Mac G 1. Click the C ONTROL P ANEL button of the driver image window. You will see the dialog box below. 2. Click the U PDATE C AMERA F IRMWARE button. 3. Wait while firmware is copied to the camera back. NOTE: Y...

Page 97 - Formatting a PCMCIA Card

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-47 Formatting a PCMCIA Card This section describes how to format a PCMCIA card, an action youshould take now as you start to use the camera back, and may need torepeat later on an occasional basis when you wan...

Page 99 - from the Macintosh S; Turn off other SCSI devices if present.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with Mac G 4-49 Quitting — Disconnecting the DCS465 Camera Back from the Computer Complete these steps when you have completed your work with the DCS465 Camera Back and the Macintosh computer. 1. If Photoshop is running, q...

Page 101 - Preparing for Use with PC

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with PC G 5-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Preparing the DCS 46...

Page 102 - Access the driver for TWAIN-compliant PC applications.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2  Preparing for Use with PC G  Install the driver for TWAIN-compliant PC applications and thecamera back calibration (CAL) file on your PC.  Insert (and remove) your PCMCIA card into the DCS 465 CameraBack.  Access the driver for TWAIN...

Page 117 - Installing a SCSI Host Adapter; For Qualified Technical Personnel Only; change its setting to enable it.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with PC G 5-17 Installing a SCSI Host Adapter The DCS 465 Camera Back connects to your PC at a SCSI port providedby installing one of the supported SCSI host adapter cards described inchapter 1. If your PC already has a su...

Page 118 - Install the SCSI Host Adapter card for your PC according to the

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18  Preparing for Use with PC G 3. Install the SCSI Host Adapter card for your PC according to the manufacturer’s installation instructions. When installation is complete,a SCSI2 connector should be available on the back of your PC, asshow...

Page 119 - Place the DCS 465 Camera Back in a convenient position next to

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with PC G 5-19 Making the SCSI Connection The DCS 465 Camera Back is a non-terminated SCSI device that connectsto your PC at a SCSI2 connection on your PC. In normal usage you mayconnect and disconnect the DCS 465 Camera B...

Page 120 - Attach the 50-pin SCSI2 connector to the SCSI2 port on the back of

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-20  Preparing for Use with PC G 5. Attach the 50-pin SCSI2 connector to the SCSI2 port on the back of the PC. Make sure the cable connector is well seated by pressing itinto place firmly, so that the spring-clips on the connector snap onto...

Page 121 - port on the DCS 465 Camera Back.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with PC G 5-21 7. Attach the other end of the cable (25-pin SCSI connector) to the SCSI port on the DCS 465 Camera Back. SCSI Port 8. (Optional) Later, to disconnect the camera back from the PC, shut down the PC. Then disc...

Page 122 - Turn off the PC and all connected SCSI devices.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-22  Preparing for Use with PC G Multiple SCSI devices are connected to a PC in a chain. If the DCS 465Camera Back is one of multiple SCSI devices connected to your com-puter, it must be connected as the last device in the chain of SCSI dev...

Page 124 - Select the SCSI cable with the 50-pin connector at one end and the

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-24  Preparing for Use with PC G 5. Select the SCSI cable with the 50-pin connector at one end and the 25-pin connector at the other end. IMPORTANT: Use only the cable supplied with the DCS 465 Camera Back;do not use a substitute cable. 25-...

Page 127 - Connect the 50-pin connector to the empty SCSI connector of the

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with PC G 5-27 5. Connect the 50-pin connector to the empty SCSI connector of the device that is terminated internally. Make sure the connector is wellseated by pressing it into place firmly, and then pinch the thin wirecl...

Page 128 - Continue at “KODAK Drivers for TWAIN-Compliant PC Applications.”; DCS 465 Camera Back Used with a Laptop

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-28  Preparing for Use with PC G 7. (Optional) Later, to disconnect the camera back from the PC, turn off the computer and all external SCSI devices. Then restore the SCSIcables and terminator to the state they were in before the camera bac...

Page 131 - The process described in this section automatically:

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with PC G 5-31 Installing TWAIN-compliant KODAKDriver(s) and the Calibration File NOTES: We assume that a technician has installed a supported SCSI host adaptercard in your PC. If that has not occurred, obtain and install ...

Page 135 - screen follow these

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with PC G 5-35 5. You see the DCS46 X C ALIBRATION F ILE INSTALLER screen; follow these steps. A. Click I NSTALL ; wait as a box indicates progress in completing the installation. C. Read the DCS46 X C ALIBRATION F ILE I N...

Page 136 - file

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-36  Preparing for Use with PC G Inserting (and Removing) a PCMCIACard into the DCS 465 Camera Back This section describes how to insert (and remove) a PCMCIA card into thecamera back. PCMCIA cards are not supplied with the camera back, but...

Page 138 - While looking at the camera back, open the door on the left edge of

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-38  Preparing for Use with PC G 2. While looking at the camera back, open the door on the left edge of the camera back by sliding the door up. ISO SCSI ID CARD BUSY . . . insert/removePCMCIA card here. Slide door up, then . . . 3. NOTE: As...

Page 142 - If the DCS 465 Camera Back and your PC are not connected, turn off

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-42  Preparing for Use with PC G Accessing a KODAK Driver forTWAIN-compliant PC Applications Repeat the steps below each time you want to access the KODAK Driverfor TWAIN-Compliant PC Applications. 1. If the DCS 465 Camera Back and your PC ...

Page 143 - NOTE: Refer to the “Important” note just above.; TWAIN S

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with PC G 5-43 Read the example for the software you use. If your software is not in-cluded, refer to its documentation to determine if it is TWAIN-compliant,and if it is, how it provides access to TWAIN drivers. NOTE: As ...

Page 144 - submenu on the F

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-44  Preparing for Use with PC G 4. Click S ELECT ; you are returned to Photoshop. NOTE: The choice of source, and other settings you establish while using thedriver, are maintained in a preferences file for the TWAIN-compliant driver;you d...

Page 145 - on the I

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with PC G 5-45 6. Wait as the driver image window appears, then continue at “Updating Firmware in the DCS 465 Camera Back.” That section begins byshowing the driver image window. Example 3: Aldus PhotoStyler 1.1A NOTE: Pho...

Page 147 - on the Media Cybernetics HALO Desktop Imager 2.01.H

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with PC G 5-47 Example 5: Media Cybernetics HALO DesktopImager 2.01.H Once you have installed the TWAIN driver(s) as described earlier in thischapter, and are in Windows, you access the driver by following thesesteps. 1. R...

Page 149 - You should now be viewing the driver image window below.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Preparing for Use with PC G 5-49 You should now be viewing the driver image window below.

Page 150 - Follow these steps to update camera back firmware.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-50  Preparing for Use with PC G NOTE: Instead of the driver image window you may see a message indicating thatthe camera back was not found. If you do, follow the troubleshooting suggestionsin the message. Additional information about this...

Page 155 - Using the DCS 465 Camera Back; Indoors connected to a computer (with or without the adapter).

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Using the DCS 465 Camera Back G 6-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Using the DCS 46...

Page 156 - Readying the DCS 465 Camera Back; If the DCS 465 Camera Back is not connected to your camera, connect

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2  Using the DCS 465 Camera Back G Readying the DCS 465 Camera Back 1. If the DCS 465 Camera Back is not connected to your camera, connect it now as described in chapters 4 (Macintosh) or 5 (PC). 2. If a formatted PCMCIA card is not in the...

Page 157 - Select either step A or B below depending on the environment in

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Using the DCS 465 Camera Back G 6-3 3. Select either step A or B below depending on the environment in which you will use the camera back. A. Indoors. Connect the camera back to the AC battery charger/adapter as described in chapters 4 (Mac...

Page 158 - A. Mechanically tripped camera. Press the record button on the

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4  Using the DCS 465 Camera Back G A. Mechanically tripped camera. Press the record button on the camera back. (The camera back sleeps again in five seconds;reawaken it, if needed, by pressing the record button again.) ISO SCSI ID CARD BUS...

Page 159 - Notice that the camera back LCD displays several graphics. (If the

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Using the DCS 465 Camera Back G 6-5 LCD CAMERA-ASLEEP GRAPHICS When not connected to a computer or the AC adapter, the cameraback automatically turns off after approximately five seconds to savethe battery. 5. Notice that the camera back LC...

Page 160 - With the camera back awake, check the battery indicator on the LCD.; Setting the ISO; This section describes how to set the ISO on the camera back.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6  Using the DCS 465 Camera Back G 6. With the camera back awake, check the battery indicator on the LCD.  If the segments are lighting in turn from bottom to top, the batteryis being charged by the attached AC battery charger/adapter; yo...

Page 161 - Locate the indented button on the back of the DCS 465 Camera Back

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Using the DCS 465 Camera Back G 6-7 2. Locate the indented button on the back of the DCS 465 Camera Back labeled “ISO.” ISO SCSI ID CARD BUSY ISO SCSI ID CARD BUSY ISO ISO indicator Current ISO ISO button

Page 162 - Taking Pictures; The camera back cannot take exposures of more than three seconds.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8  Using the DCS 465 Camera Back G 3. Press the ISO button once with your fingertip or other blunt object; this action wakes ISO mode. The characters “ISO” appear on thecamera back LCD as does the current ISO. 4. While “ISO” still appears ...

Page 163 - B. Electrically tripped cameras. You do not need to wake the camera; If the shutter release plunger is; Frames Remaining

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Using the DCS 465 Camera Back G 6-9 B. Electrically tripped cameras. You do not need to wake the camera back. Instead, after winding the film winder (if necessary), pressand hold the shutter release cable button for one-quarter secondor mor...

Page 164 - Frame Counter; Hold the camera back approximately six inches from your mouth.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10  Using the DCS 465 Camera Back G The oval at the right of the LCD indicates the amount of the PCMCIA cardfilled with images. As more pictures are taken, subsequent sectors of thisgraphic appear. Card up to 1/6 filled Card filled (indica...

Page 165 - pressing the Record button will wake it.); are recorded to the PCMCIA card.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Using the DCS 465 Camera Back G 6-11 2. Press and hold the Record button. (If the camera back is not awake, pressing the Record button will wake it.) ISO SCSI ID CARD BUSY Record button Microphone Card Busy light 3. Speak into the microphon...

Page 169 - Accessing Images from a Mac; Access the Kodak Driver for Adobe Photoshop Software.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Accessing Images from a Mac G 7-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Accessing DCS 465 ...

Page 172 - Pull down the Adobe Photoshop F; from the Adobe Photoshop F; menu will not acquire images

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4  Accessing Images from a Mac G 8. Pull down the Adobe Photoshop F ILE menu and choose KODAK DCS 465 from the A CQUIRE submenu. NOTE: O PEN from the Adobe Photoshop F ILE menu will not acquire images from the DCS 465 Camera Back.

Page 173 - Wait as the driver image window appears.; NOTES: If a single large image appears, click the P; choice “off” to

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Accessing Images from a Mac G 7-5 9. Wait as the driver image window appears. NOTES: If a single large image appears, click the P REVIEW choice “off” to replace that larger preview image with the smaller images. The number of images on each...

Page 175 - Photoshop window) appears in the driver image window.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Accessing Images from a Mac G 7-7 Viewing Images with the KODAKDriver for Adobe Photoshop Software The driver image window displays thumbnails of images from the DCS465 Camera Back PCMCIA card. A thumbnail is a subsample of data fromthe ful...

Page 176 - ” box beneath the

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8  Accessing Images from a Mac G 2. (Optional) Click once on the small square “I NFO ” box beneath the lower right corner of an image; an information box opens at the rightof the driver image window. Text box

Page 177 - button of; button of the; If you have opened the information box, click its D; button to close

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Accessing Images from a Mac G 7-9 The information box displays data about the status of the camera backwhen the image was taken. Included are: time (displayed in 24-hourformat) and date the image was made, firmware version number(a date), c...

Page 178 - . You see a single, enlarged version of the

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10  Accessing Images from a Mac G 5. (Optional) Click on P REVIEW . You see a single, enlarged version of the image. The preview image appears in color (if it was taken with a colormodel of the camera back and if you have a color monitor)....

Page 179 - NOTE: The information in this section applies only to color images.; popup menu of the driver image; popup menu during this or a subsequent work; Read through all parts of this step and then make the appropriate

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Accessing Images from a Mac G 7-11 Selecting the Color Balance for anImage(s) NOTE: The information in this section applies only to color images. In the following steps you will select an option to correspond to theoriginal lighting conditi...

Page 180 - from the B; menu after

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12  Accessing Images from a Mac G  The DAY, TUNG, FLUOR, or FLASH choices correspond todaylight, tungsten, fluorescent, or flash lighting conditions.  The C LICK choice, which is always the preferred option, allows you to provide color b...

Page 181 - acquiring by clicking the C; button if one appears in the progress; button. Images can be acquired while in preview or; each image will open into a separate; Wait as the driver image window closes and the image appears in a; from the Photoshop F; menu or quit Photoshop, the window

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Accessing Images from a Mac G 7-13 Acquiring Images with the KODAKDriver for Adobe Photoshop You are now ready to acquire an image into Photoshop. Acquiring animage copies its image data from the PCMCIA card into Photoshop, wherethe acquire...

Page 182 - and save additional images.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-14  Accessing Images from a Mac G 5. (Optional) Repeat the steps of the last several sections and acquire and save additional images. 6. (Optional) Replace the PCMCIA card in the camera back with another card while connected to the compute...

Page 183 - Playing Recorded Sound Files

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Accessing Images from a Mac G 7-15 Playing Recorded Sound Files Sound files that you have recorded when using the camera back are savedto the PCMCIA card as described in chapter 6. Once in the driver, asound file is represented by a small i...

Page 185 - Selecting Images; or L; . Deselect selected images by clicking the N; Button

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Accessing Images from a Mac G 7-17 Using Other Features of the KODAKDriver for Adobe Photoshop Software The driver provides a variety of additional features that allow you to workwith image and sound files on the DCS 465 Camera Back PCMCIA ...

Page 186 - Performs the same function as C; , except that after copying; from the popup menu), or archive files on the Macintosh com-

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-18  Accessing Images from a Mac G C OPY TO F OLDER Button Copies “selected” image files and recorded associated sound data fromthe PCMCIA card to the Macintosh hard disk. Each image and each soundbecomes a separate file in a folder on the ...

Page 187 - as the S; Other Features

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Accessing Images from a Mac G 7-19 C HANGE F OLDER Button Closes the current folder whose images are displayed in the driver imagewindow, and replaces the current contents of the driver image windowwith the contents of another folder of arc...

Page 190 - Quitting; commands from the F; menu to

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-22  Accessing Images from a Mac G Quitting Complete these steps when you have completed your work with the DCS465 Camera Back and the Macintosh computer. NOTE: As mentioned at the start of this chapter, the settings you choose while inthe ...

Page 191 - Accessing Images from a PC; Access the Kodak Driver for TWAIN-compliant PC applications.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Accessing Images from a PC G 8-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Accessing DCS 465 C...

Page 193 - Repeat the steps below each time you want to access the driver.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Accessing Images from a PC G 8-3 Accessing the DCS 465 Camera Backfrom the Driver Repeat the steps below each time you want to access the driver. 1. If the DCS 465 Camera Back and your PC are not connected, turn the computer off and connect...

Page 194 - If one is not present, insert a PCMCIA card into the camera back.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4  Accessing Images from a PC G 6. If one is not present, insert a PCMCIA card into the camera back. NOTES: As you work with the camera back and the computer, you can insertand remove cards at any point in the process; however, do not remo...

Page 196 - window in your application) appears in the driver image window.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6  Accessing Images from a PC G Viewing Images with the KodakDriver for TWAIN-Compliant PCApplications The driver image window displays thumbnails of images from the DCS465 Camera Back PCMCIA card. A thumbnail is a subsample of data fromth...

Page 198 - button of the control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8  Accessing Images from a PC G The information box displays data about the status of the camera backwhen the image was taken. Included are: time (displayed in 24-hourformat) and date the image was made, firmware version number (adate), ca...

Page 202 - each image will open into a separate window.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12  Accessing Images from a PC G Acquiring Images with the Driver forTWAIN-compliant PC Applications You are now ready to acquire an image. Acquiring an image copies itsimage data from the PCMCIA card into your application, where theacquir...

Page 203 - (Optional) Replace the PCMCIA card in the camera back with another

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Accessing Images from a PC G 8-13 6. (Optional) Replace the PCMCIA card in the camera back with another card while connected to the computer and repeat the steps of the lastseveral sections; however, do not remove a card while the red CardB...

Page 208 - Popup Menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18  Accessing Images from a PC G S OURCE Popup Menu Allows you to switch between files on the DCS 465 Camera Back (chooseC AMERA from the popup menu), or archive files on the PC (choose F OLDER from the popup menu). C HANGE F OLDER Button ...

Page 209 - button as described just above this will ensure that

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Accessing Images from a PC G 8-19 Creating Monochrome Images with Your ColorCamera Back You may be able to use your application to create monochrome imagesfrom color images taken with a color camera back. For one example referto chapter 11....

Page 211 - Acquire additional images or choose CANCEL to leave the driver

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Accessing Images from a PC G 8-21 Quitting Complete these steps when you have completed your work with the DCS465 Camera Back and the PC. NOTE: As mentioned at the start of this chapter, the settings you choose while inthe driver image wind...

Page 213 - Reference — DCS 465 Camera Back

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — DCS 465 Camera Back G 9-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Reference — DC...

Page 214 - DCS 465 Camera Back and Imager

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2  Reference — DCS 465 Camera Back G DCS 465 Camera Back and Imager The KODAK camera back incorporates a charge coupled device (CCD)full-frame imager that collects light resulting in a file containing 6.0megabytes of data. There are two ve...

Page 216 - DCS 465 Camera Back Controls

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4  Reference — DCS 465 Camera Back G DCS 465 Camera Back Controls Liquid Crystal Display (LCD) A liquid crystal display (LCD) on the back of the KODAK camera backprovides status information for the DCS 465 Camera Back. ISO SCSI ID CARD BUS...

Page 217 - Battery Indicator

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — DCS 465 Camera Back G 9-5 ISO SCSI Battery indicator Frames remaining ISO indicator SCSI indicator Disk indicator LCD FULL GRAPHICS (For this illustration all items are shown simultaneously although at no time do all ofthese ite...

Page 218 - Image Numbering Systems; Frames Remaining Indicator

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6  Reference — DCS 465 Camera Back G When you operate with the AC battery charger/adapter connected, thethree segments of this icon light repeatedly in turn from bottom to topwhile the battery is charging. When it is fully charged all thre...

Page 219 - Image Reference Number

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — DCS 465 Camera Back G 9-7 2. Image Reference Number A separate image number is assigned by the camera back to each picture you take. These numbers go up by one as each picture is taken. Afterreaching number 99, the image referen...

Page 220 - Disk Indicator; Disk Error Indicator

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8  Reference — DCS 465 Camera Back G functional problems; however, you can avoid potential confusion byoccasionally erasing or formatting the PCMCIA card after copying allneeded images to your computer hard disk. Disk Indicator The disk in...

Page 221 - Control Buttons

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — DCS 465 Camera Back G 9-9 Control Buttons Two control buttons — ISO and SCSI ID — are provided on the KODAKcamera back. Both are recessed in the housing and are operational whenpressed with a fingertip or other blunt object. ISO...

Page 222 - ISO Button and ISO Indicator; You use the ISO button to set the ISO on the camera back.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10  Reference — DCS 465 Camera Back G ISO Button and ISO Indicator You use the ISO button to set the ISO on the camera back. To use the ISO button, if you are not connected to a computer or the ACbattery charger/adapter, first press the re...

Page 224 - SCSI ID Button and SCSI Indicator

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-12  Reference — DCS 465 Camera Back G SCSI ID Button and SCSI Indicator You use the SCSI ID button to set the DCS 465 Camera Back SCSI ID. Thesetting is important when the DCS 465 Camera Back is connected to yourcomputer. ISO SCSI ID CARD ...

Page 227 - Multipurpose Connector

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — DCS 465 Camera Back G 9-15 Multipurpose Connector A 7-pin mini-din connector on the camera back serves several purposes.  You plug the AC battery charger/adapter directly into this connector.  As available, you can also plug a...

Page 228 - PCMCIA Cards; Supported PCMCIA Cards

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16  Reference — DCS 465 Camera Back G PCMCIA Cards “Standard,” removable, credit-card sized PCMCIA cards (Personal Com-puter Memory Card International Association) are used for image storage.The camera back incorporates a PCMCIA-ATA Type I...

Page 229 - Card Busy Light

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — DCS 465 Camera Back G 9-17 Consult the specifications for your cards to determine if their operatinglimits (for temperature, humidity, etc.), are more restrictive than those forthe DCS 465 Camera Back, and if they are, adhere to...

Page 230 - The R; button on the control panel of the software driver, can

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-18  Reference — DCS 465 Camera Back G associated with that single PCMCIA card, or with another part of thecamera back. If the problem is with the PCMCIA card, you can try thesteps in the next paragraph. The R ECOVER D ISK button on the con...

Page 231 - You can use the camera back in the following configurations.; DCS 465 Camera Back Supported Configurations

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — DCS 465 Camera Back G 9-19 DCS 465 Camera Back OperatingConfigurations You can use the camera back in the following configurations. IMPORTANT: Refer to chapters 4 (Macintosh) or 5 (PC) for specific cabling andtermination details...

Page 232 - Do not take new pictures while an image is being acquired.; button

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-20  Reference — DCS 465 Camera Back G Taking Pictures While Connected to theComputer You can take pictures with your camera and the camera back whileconnected to the computer (for example in a studio setting). The followingconsiderations a...

Page 235 - Battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — DCS 465 Camera Back G 9-23 Battery and AC Battery Charger/Adapter Battery The DCS 465 Camera Back incorporates a single, rechargeable nickelhydride battery. In typical shooting situations, a fully-charged battery (abattery that ...

Page 236 - AC Battery Charger/Adapter

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-24  Reference — DCS 465 Camera Back G AC Battery Charger/Adapter To camera AC BATTERY CHARGER/ADAPTER POWER CORD To wall outlet To AC battery charger/adapter CAUTION: Observe all cautions regarding this unit included in “ACBattery Charger/...

Page 238 - Recorded Sound

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-26  Reference — DCS 465 Camera Back G Recorded Sound The DCS 465 Camera Back can record sound via a built-in microphonepositioned in the camera back. This feature, implemented with a goal ofsimplicity and ease of use, allows you to record ...

Page 239 - How to Record Sound

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — DCS 465 Camera Back G 9-27 As a sound segment is recorded, it is held briefly in dynamic randomaccess memory (DRAM) in the camera back, and is then moved to thePCMCIA card where it is saved as a sound file. As a result, the card...

Page 240 - Recording “Lengthy” Audio Segments

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-28  Reference — DCS 465 Camera Back G As sound is being recorded, segments of the disk icon bounce up andback, serving as a level meter (similar to the levels commonly displayedon audio equipment like tape decks). The bouncing segments pro...

Page 241 - Sound File Size

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — DCS 465 Camera Back G 9-29  During the interruption between each 25 second segment, the redCard Busy LED on the camera back blinks, and the dot in the diskicon goes off. These indicate that data are being written to the card,an...

Page 243 - Trouble

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — DCS 465 Camera Back G 9-31 No power when usingthe battery. The battery isdischarged. Charge the battery with the ACbattery charger/adapter, oroperate from the AC batterycharger/adapter. No power to charge thebattery when using t...

Page 249 - Cleaning the Imager; Determining if the Imager is Dirty; There are two ways to determine whether the imager needs cleaning:

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — DCS 465 Camera Back G 9-37 Cleaning the Imager and Cleaning/Replacing the KG5 Filter Glass CAUTION: In the following steps you will expose the imager to theenvironment. Because the imager is sensitive to static discharge, youmus...

Page 250 - Technique 1: Examine a Test Image

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-38  Reference — DCS 465 Camera Back G Technique 1: Examine a Test Image 1. Set up the DCS 465 Camera Back to operate while connected to a computer. 2. Set the lens aperture to its highest f number, to provide for maximum depth of field. 3....

Page 253 - screws that hold the frame in place.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — DCS 465 Camera Back G 9-41 8. Remove the frame that holds the KG5 filter glass by removing the four screws that hold the frame in place. KG5 FILTER GLASS FRAME 9. Carefully lift the KG5 filter glass from the camera back. 10. Not...

Page 254 - ever, if the imager is dirty, clean it using the following steps.; Cleaning a Dirty Imager; Wiping the Imager; Examine the imager visually. If there is lint on the imager (but not

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-42  Reference — DCS 465 Camera Back G 11. Hold the camera back so that light reflects off the imager; visually inspect the imager for grease, fingerprints, lint, or other dirt. 12. If the imager is clean, continue at “Cleaning the Filter G...

Page 255 - across the imager with a dry corner of the cleaning pad.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — DCS 465 Camera Back G 9-43 5. Gently scrub the imager with the damp corner of the cleaner pad; use a circular motion, and move over the entire imager. This actionshould dislodge dirt and/or remove grease and fingerprints. 6. Wip...

Page 256 - Cleaning the Filter Glass; Complete the steps below for each side of the filter glass.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-44  Reference — DCS 465 Camera Back G Cleaning the Filter Glass It is possible that the glass covering in the middle of the face of thecamera back (the side with the imager), called the KG5 filter glass, maybecome dirty, or may break. This...

Page 257 - Replacing the Filter Glass and Frame

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — DCS 465 Camera Back G 9-45 6. Wipe off residue on the filter glass by wiping repeatedly straight across the glass with a dry corner of the cleaning pad. 7. Carefully lift the filter glass by its edge, and examine it in the light...

Page 259 - Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software; The file format used for image archive files.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software G 10-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 261 - Image Archive Folders; Images saved to the Macintosh computer hard disk by clicking C; button as described later

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software G 10-3 Image Archive Folders Images saved to the Macintosh computer hard disk by clicking C OPY TO F OLDER or M OVE TO F OLDER from within the Photoshop driver supplied by Ko...

Page 262 - Commands; submenu of the Photoshop F; The first time you choose this driver, a file named DCS 465 P; is

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4  Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software G Commands The driver provides a variety of features that allow you to work withimage and sound files on the DCS 465 Camera Back PCMCIA card andon the Macintosh hard dis...

Page 264 - If you click the small square “I; ” box beneath the lower right corner of; button or elsewhere on the driver

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-6  Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software G Thumbnails appear in the driver image window in the same logical orderthat images appear on the DCS 465 Camera Back PCMCIA card. Openingan archive folder opens all arc...

Page 266 - choice described; from the popup menu), and from all archive files in a folder on the

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-8  Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software G The time and date are maintained by the battery in the DCS 465 CameraBack. You update the date and time with the S ET C LOCK choice described later in this chapter. Yo...

Page 267 - on the Control Panel), any changes you make in the B; setting are

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software G 10-9 C HANGE F OLDER Allows you to close the current archive folder (its contents are shown inthe driver image window), and open another archive folder on theMacintosh comp...

Page 269 - This option affects only color images.; ” earlier in this chapter for an explanation of the use of

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software G 10-11 If there is no white or light gray area in the image, take a photo-graph of a neutral gray or white card (for example KODAK GrayCards, Publication No. R-27) under the...

Page 270 - chooses images from the DCS 465 Camera Back PCMCIA; and then click on D; selects thumbnails of; , you will see that all images are; is on, and also when there are

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12  Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software G S ELECT Highlights images. (A narrow border surrounds highlighted images.) Thebuttons are useful for selecting images to delete, or to copy or move to theMacintosh co...

Page 271 - Click on this button to deselect all highlighted images.; CTION; Provides the following capabilities.; Allows you to acquire an image into Adobe Photoshop.; box. However, you can copy or cut text from the text box

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software G 10-13 L AST I MAGE Highlights the last image. This choice is dimmed when there are noimages available. N ONE Click on this button to deselect all highlighted images. A CTIO...

Page 273 - Do not take a new picture while an image(s) is being moved to a folder.; must be C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software G 10-15 or an archive folder on the Macintosh computer hard disk. A dialog boxprovides you with the option of deleting the images. NOTES: The M OVE TO F OLDER button is dimme...

Page 274 - Displays the following dialog box.; Select this choice to update the firmware in the

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-16  Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software G C ONTROL P ANEL Displays the following dialog box. NOTE: If the S OURCE is F OLDER , the items in the box below related to the camera back or PCMCIA card (such as U P...

Page 275 - Displays the version of the firmware (control program-; Displays the version of the software driver currently in use.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software G 10-17 service center, since new versions of the file that you mayobtain can be copied to the camera back with this com-mand. It also allows you to replace the firmware in t...

Page 276 - ” box beneath the lower right corner of the

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-18  Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software G D O S ELF T EST Click this button to perform a diagnostic self-test of the DCS465 Camera Back. Messages inform you of the outcome ofthe self-test. These data can be h...

Page 278 - The following examples explain the action of this button.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-20  Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software G The following examples explain the action of this button. Example 1. Suppose that you have a camera back with aPCMCIA card capable of storing 26 images, and that youh...

Page 280 - the popup menu to play its sound.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-22  Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software G Saving Sound Files to Your ComputerHard Disk Once in the driver, a sound file recorded with the camera back appears asa small icon below the lower left hand corner of...

Page 283 - Message

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software G 10-25 “A colon (:) is not allowedin a filename.” During a “Copy toFolder” or “Move toFolder” operation, youhave entered a colon aspart of a filename. Use a filename without...

Page 307 - Reference — KODAK Drivers for TWAIN-Compliant PC Applications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — KODAK Drivers for TWAIN-Compliant PC Applications G 11-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 309 - Images saved to the PC hard disk by clicking C; button as described later in this chapter this will ensure

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — KODAK Drivers for TWAIN-Compliant PC Applications G 11-3 Image Archive Folders Images saved to the PC hard disk by clicking C OPY TO F OLDER or M OVE TO F OLDER from within the driver supplied by Kodak should be read only with t...

Page 312 - button. The data displayed includes, from top

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-6  Reference — KODAK Drivers for TWAIN-Compliant PC Applications G When working with images from a folder from the PC hard disk instead ofimages from the PCMCIA card, the folder name appears at the top of theimage window. Two-digit image ...

Page 313 - from the S; folder name appears at the top of the driver image window.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Reference — KODAK Drivers for TWAIN-Compliant PC Applications G 11-7 The time and date are maintained by the battery in the DCS 465 CameraBack. You update the date and time with the S ET C LOCK choice described later in this chapter. You ca...

Page 316 - balance on the

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-10  Reference — KODAK Drivers for TWAIN-Compliant PC Applications G Cards, Publication No. R-27) under the same lighting conditionsthat existed when the image was taken. Use C LICK balance on the preview (or thumbnail) of this image to se...

Page 318 - button. Images can be acquired while in preview or thumb-; button is dimmed until you select an image(s) or go to preview mode.; each image will open into a separate window. To select

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12  Reference — KODAK Drivers for TWAIN-Compliant PC Applications G A CTION Provides the following capabilities. A CQUIRE Allows you to acquire an image into your TWAIN-compliant PC applica-tion. This action does not affect the image at i...

Page 351 - Appendices

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Appendices G 12-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Appendices This section includes ...

Page 353 - Updating Your Kodak Software Driver; Downloading Software Drivers Electronically

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Updating Your Kodak Software Driver G A-1 Appendix A — Updating Your KODAKSoftware Driver This appendix provides information on obtaining and installing updatedsoftware drivers including:  Directions for downloading software drivers electr...

Page 354 - Network

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2  Updating Your Kodak Software Driver G Network Description/Address CompuServe “Gives you access to over 1700 products and services, plus the knowledge and expertise of . . . CompuServe members worldwide.” CompuServe5000 Arlington Centre ...

Page 355 - Downloading a Driver from CompuServe; Follow these steps to enter the K

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Updating Your Kodak Software Driver G A-3 Downloading a Driver from CompuServe This section assumes that you have an account on CompuServe and thatyou are familiar with procedures to initiate and terminate a session on thisnetwork. If you n...

Page 357 - NOTE: The files may have different names from those shown above.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Updating Your Kodak Software Driver G A-5 E. Click S EARCH ; you see a list of DCS 465 driver updates and other files. F. Select the driver for Adobe Photoshop Macintosh computer or TWAIN if you are working on a PC. NOTE: The files may have...

Page 358 - Extracting Driver Files for Adobe Photoshop (Macintosh)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6  Updating Your Kodak Software Driver G 5. Finish with other business on CompuServe as needed, and then terminate your work session. Continue just below if you are working with the driver for AdobePhotoshop (Macintosh), or at “Extracting ...

Page 359 - There are a variety of ways to extract the files one follows.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Updating Your Kodak Software Driver G A-7 Extracting Driver Files for TWAIN (PC) The data you have downloaded contains several files that have beencombined and compressed into a single file. Compression results in asmaller file size — an ad...

Page 360 - Downloading a Driver from PressLink

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8  Updating Your Kodak Software Driver G Downloading a Driver from PressLink This section assumes that you have an account on PressLink and that youare familiar with procedures to initiate and terminate a session on thisnetwork. If you nee...

Page 362 - Downloading and Unpacking Files for TWAIN (PC)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-10  Updating Your Kodak Software Driver G Downloading and Unpacking Files for TWAIN (PC) 1. Initiate a computer work session on the PC, run your copy of PressLink System 2000 for Windows, and connect to the host. NOTE: The steps below were...

Page 364 - Downloading a Driver from AppleLink; from the W; Follow these steps to download the file to your hard disk.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-12  Updating Your Kodak Software Driver G Downloading a Driver from AppleLink This section assumes that you have an account on AppleLink and that youare familiar with procedures to initiate and terminate a session on thisnetwork. If you ne...

Page 365 - D. Wait as the file is downloaded from the network to your com-; Expanding Driver Files for Adobe Photoshop (Macintosh); Double-click the icon on your hard disk of the file you downloaded.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Updating Your Kodak Software Driver G A-13 D. Wait as the file is downloaded from the network to your com- puter; a progress box provides information on the downloadprocess. 6. Finish with other business on AppleLink as needed, and then ter...

Page 366 - Navigate through your hard disk (on the right of this dialog box) as; from the F; Continue below at the section “Installing the Software Driver.”; Installing the Software Driver

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-14  Updating Your Kodak Software Driver G 3. Navigate through your hard disk (on the right of this dialog box) as needed to choose a location to which the extracted files will be saved. 4. Click S AVE A LL . 5. Wait as the files are extrac...

Page 367 - Complete all the steps in “Installing the KODAK Driver for Adobe

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Updating Your Kodak Software Driver G A-15 Updating the KODAK Driver for AdobePhotoshop Software (Macintosh) 1. Complete all the steps in “Installing the KODAK Driver for Adobe Photoshop Software on Your Macintosh Computer ” in chapter 4,ex...

Page 368 - Access the new driver by completing all the steps in “Accessing a

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-16  Updating Your Kodak Software Driver G Updating the KODAK Driver for TWAINSoftware (PC) 1. Complete all the steps in “Installing the KODAK Driver for use with TWAIN-Compliant Software” in chapter 5, except that if the files havebeen dow...

Page 369 - Repacking Instructions; Fill out the enclosed KODAK Professional DCS 465 Digital Camera

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Repacking Instructions G B-1 Appendix B — RepackingInstructions for the KODAKProfessional DCS 465Digital Camera Back If you are having difficulties using your KODAK Professional DCS 465Digital Camera Back, please contact a Kodak representat...

Page 370 - Place all other major system components (see above) into their

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2  Repacking Instructions G 3. Remove the DCS 465 Camera Back from your camera.4. Cover the imager on the camera back with the imager cover.5. Insert the DCS 465 Camera Back into the static shielding bag and seal the bag with tape. 6. Plac...

Page 371 - Problem Report Form; Customer Return Address; See the data label on the top of the DCS 465 Camera Back.); Problem Description

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Problem Report Form G C-1 Appendix C — KODAK ProfessionalDCS 465 Digital Camera BackProblem Report Form Customer Return Address Name _______________________________________________________________ Company ___________________________________...

Page 373 - Optional Equipment & Spare Parts List; Item Name

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Optional Equipment & Spare Parts List G D-1 Appendix D — Optional Equipment &Spare Parts List Ordering Optional Kodak Equipment from YourDealer To order items in this category, contact your dealer. For product informa-tion, includin...

Page 375 - Ordering Spare Parts from Kodak; Part Name

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Optional Equipment & Spare Parts List G D-3 966157 25-pin to 50-pin SCSI cable IBM/Compatible PCCables 953867 50-pin to 25-pin SCSI2 cable for use with theFuture Domain SCSI Host Adapter Gender Changer 966976 Macintosh SCSI gender chang...

Page 377 - Description; Ordering New Manuals from Kodak

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Optional Equipment & Spare Parts List G D-5 You can order the following DCS 465 Camera Back accessories fromDigital and Applied Imaging Marketing Support (DAIMS) CustomerService. Call 1-800-535-4633 Monday to Friday between the hours of...

Page 379 - Specifications; Appendix E — Specifications; KODAK Camera Back; Takes one shot every eight seconds.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Specifications G E-1 Appendix E — Specifications KODAK Camera Back  3060 x 2036-pixel charge coupled device (CCD) full-frame imager,resulting in images composed of 6.0 megapixels of data. Acquiredcolor images are 18 megabytes (MB) and acqu...

Page 380 - Flash sync standard connector.; Software Driver

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-2  Specifications G  KG5 built-in replaceable filter glass.  Camera Sync 4-pin mini-din connector.  Electrically tripped camera (Elec Cam Trip) 3-pin mini-din connector.  Shutter release 5-pin mini-din connector.  Flash sync standard ...

Page 381 - Glossary; Appendix F — Glossary; See Image archive folder.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Glossary G F-1 Appendix F — Glossary This section provides brief explanations of terms used in conjunction withthe DCS 465 Camera Back. Refer to these items individually in the Indexin this manual to find additional reference material about...

Page 384 - PCMCIA card. “Standard,” removable credit-card sized cards that meet

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-4  Glossary G Info box. A window, appearing when you click on “Info” beneath thethumbnail or preview of an image, that displays a variety ofdata about the status of the camera back when the imagewas taken. KODAK Camera Back. A sealed, one-...

Page 385 - Thumbnail mode. The state of the driver image window when Preview

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Glossary G F-5 Throw. The distance the pin extends from the end of the cablerelease when you fully depress the cable release button. Thumbnail mode. The state of the driver image window when Preview is off and multiple thumbnails are visibl...

Page 387 - Index

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Index G 13-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Index

Page 398 - EASTMAN KODAK COMPANY • ROCHESTER, NY 14650; KODAK Professional DCS 465 Digital Camera Back

EASTMAN KODAK COMPANY • ROCHESTER, NY 14650 KODAK Professional DCS 465 Digital Camera Back Revised 9-95 Part No. 8B4724 Kodak is a trademark. Printed in U.S.A. DIGITAL & APPLIEDI M A G I N G