Kodak i30/i40 - Manual
Kodak i30/i40 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
CLEANING THE IMAGING GUIDE AND
PAPER SENSORS
1. Remove dust and debris from this area by using a Stati-
cide wipe or a small brush. Be careful not to scratch the
glass when cleaning.
2. Wipe the imaging guide with a Staticide wipe.
IMPORTANT:S
taticide wipes contain isopropanol which can
cause eye irritation and dry skin. Wash your
hands with soap and water after performing
maintenance procedures. Refer to the User’s
Guide for MSDS acquisition.
3. Wipe the imaging guide again with an almost-dry
Staticide wipe to remove any streaks.
4. Clean the reflector spot using the almost-dry Staticide
wipe to remove any dust or streaks.
K NUMBER, SERIAL NUMBER AND DATA-
PLATE LOCATION
The K Number, Serial Number and Dataplate can be found
on the bottom of the scanner.
To access the dataplate:
•
Carefully tilt the scanner back until you can see the
dataplate on the bottom of the scanner.
SUPPLIES
*
* Items are subject to change.
.
EASTMAN KODAK COMPANY
Document Imaging
Rochester, New York 14650
Kodak and Digital Science are trademarks of Eastman Kodak Company.
© Eastman Kodak Company, 2004
A-61526
Kodak
i30/i40 Scanners
Quick Tips
www.kodak.com
Kodak Service
1-800-822-1414
Kodak Parts Services
1-800-471-0803
1-585-724-6042
Kodak Professional Services
1-800-525-6325
Imaging guide
Reflector spot
Serial number and
K number
Dataplate
CAT No.
Description
174 7849
Kodak
Feed Module / for i30/i40
Scanners
853 5981
Kodak Digital Science
Roller Cleaning
Pads (qty 24)
896 5519
Staticide Wipes for
Kodak
Scanners
(qty 144)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
