Kodak EXR 500T - Manual
Kodak EXR 500T – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Light Source KODAK Filters on Camera; Yellow-Flame Arcs Color Compensating 20Y 320/26
- Page 3 – ) Reciprocity Characteristics; The LAD
- Page 4 – Data Sheet—4; ISO RPL; 4) Available Roll Lengths; MTF
- Page 5 – Granularity; Professional Motion Imaging; End of Data Sheet
- Page 6 – Data Sheet—6
- Page 7 – Data Sheet—7
- Page 8 – Data Sheet—8
- Page 9 – Data Sheet—9
TECHNICAL INFORMATION DATA SHEET
TI2082 Revised 10-93
Copyright, Eastman Kodak Company, 1993
EASTMAN EXR 500T Film 5298
1) Description
EASTMAN EXR 500T Film 5298 (35 mm) is a high-speed tungsten-balanced color negative camera film with
microfine grain, very high sharpness, and high resolving power. It feature wide under and over exposure latitude,
with whiter whites, and accurate color and flesh-to-neutral reproduction. Enhanced shadow detail provides crisper,
richer blacks. It also offers improved shadow detail and blacks in telecine transfers. This film reproduces a wide
range of colors for increased performance in special-effects applications.
2) Base
EASTMAN EXR 500T Film 5298 has an acetate safety base with rem-jet backing.
3) Darkroom Recommendations
Do not use a safelight. Handle unprocessed film in total darkness.
4) Storage
Store unexposed film at 13ºC (55ºF) or lower. For extended storage, store at -18ºC (0ºF) or lower. Process exposed film
promptly. Store processed film according to the recommendations in NAPM IT9.11-1992: for medium-term storage
(minimum of ten years), store at 10ºC (50ºF) or lower at a relative humidity of 20 to 30 percent; for extended-term
storage (for preservation of material having permanent value), store at 2ºC (35ºF) or lower at a relative humidity of 20
to 30 percent. For active use, store at 25ºC (77ºF) or lower, at a relative humidity of 50 +/- 5 percent. This relates to
optimized film handling rather than preservation; static, dust-attraction and curl-related problems are generally
minimized at the higher relative humidity. After usage, the film should be returned to the appropriate medium- or
long-term storage conditions as soon as possible.
For more information about medium- and long-term storage, see NAPM IT9.11-1992, and KODAK Publications No.
H-1, EASTMAN Professional Motion Picture Films (1992 Edition) and No. H-23, The Book of Film Care (1992
Edition).
5) Exposure Indexes
Tungsten (3200K) - 500/28 Daylight
1
- 320/26
Use these indexes with incident- or reflected-light exposure meters and cameras marked for ISO or ASA speeds or
exposure indexes. These indexes apply for meter readings of average subjects made from the camera position or for
readings made from a gray card of 18-percent reflectance (such as one of the KODAK Gray Cards, KODAK
Publication No. R-27) held close to and in front of the subject. For unusually light- or dark-colored subjects, decrease
or increase the exposure indicated by the meter accordingly.
1
With a KODAK WRATTEN Gelatin Filter No. 85.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Data Sheet—2 Copyright, Eastman Kodak Company, 1993TI2082 Revised 10-93 6) Color Balance This film is balanced for exposure with tungsten illumination (3200K). You can also expose it with tungstenlamps that have slightly higher or lower color temperatures (+/- 150K) without correction filters, since...
Data Sheet—3 Copyright, Eastman Kodak Company, 1993TI2082 Revised 10-93 Lighting Contrast -The recommended ratio of key-light-plus-fill-light to fill light is 2:1 or 3:1. However, you may use 4:1 or greater whena particular look is desired. 8) Reciprocity Characteristics You do not need to make any ...
Data Sheet—4 Copyright, Eastman Kodak Company, 1993 TI2082 Revised 10-93 13) Image Structure The modulation-transfer curves, the diffuse rms granularity, and the resolving-power data were generated fromsamples of 5298 Film exposed with tungsten light and processed as recommended in Process ECN-2 che...
