Kodak EX811 - Manual

2 www.kodak.com/go/support Getting started Replacing the remote control battery NOTE: Replace with a CR2025, 3V lithium cell battery. 1 Push and hold the release tab while pulling the battery holder out of the remote. Follow the graphic on the back of the remote control. 2 Place the new battery in t...

Getting started www.kodak.com/go/support 3 Using the remote control buttons Some buttons are also on the back of the frame ( page ii ). They operate identically. * First, turn on the power switch on the frame. back OK menu Button Press to: power* turn on/off the picture frame. home return to the hom...

4 www.kodak.com/go/support Getting started Setting up your picture frame Buttons and controls All buttons and controls described in this guide (for example: press ) are on the remote control unless otherwise noted. Connecting the power cable 1 Pull out and extend the stand on the frame back and plac...

Getting started www.kodak.com/go/support 5 Inserting a card or camera Connecting a digital camera or other USB device CompactFlashMicroDrive Secure DigitalMemory StickxDMultiMedia Card a) USB cable included with your USB device. b) USB adapter cable included with your EX model picture frame. a) b)

6 www.kodak.com/go/support Getting started Turning on the frame ■ Press the power switch to On. NOTE: You can leave the power switch On, and use the remote control to turn the frame off and on. Setting your language The language screen appears the first time you turn on your frame. ■ Press to select...

Getting started www.kodak.com/go/support 7 Viewing your first slide show! ■ To play a slide show, insert a memory card or USB device (see page 5 ). The pictures/videos are displayed in the order they appear on the card or other device. – If a slide show is already playing (for example, from the pre-...

8 www.kodak.com/go/support 2 Viewing pictures and videos Home screen—picture sources and settings Go to the Home screen to access pictures from all connected sources and to change frame settings. 1 On the remote control, press Home . All connected sources and the Settings icon are displayed. 2 Press...

Viewing pictures and videos www.kodak.com/go/support 9 Running a slide show There are three ways to start a slide show on your frame: ■ Insert a memory card or connect a USB device, then turn on the frame. ■ Turn on your frame, then insert a card or connect a USB device—a new slide show starts autom...

10 www.kodak.com/go/support Viewing pictures and videos Viewing a single picture ■ To view a single, full-screen picture, highlight it in thumbnails view and press OK. ■ To magnify a picture up to 8X, press repeatedly. To view other parts of the picture, press . Press repeatedly to return. ■ To rota...

Viewing pictures and videos www.kodak.com/go/support 11 Viewing pictures by date or filename By default, the pictures and videos on your frame are arranged and played by date, starting with the oldest. You can change the arrangement, or sort order, by date or alphabetically by filename. To change th...

12 www.kodak.com/go/support 3 Doing more with your frame Playing music Play your MP3 files from any connected source (see page 8 ). 1 Press . Your picture or slide show is paused. 2 Press to highlight your music source, then press OK. 3 Press to locate your music files, then press OK. 4 Press to go ...

Doing more with your frame www.kodak.com/go/support 13 Printing pictures Your frame is compatible with PictBridge technology, so you can print directly to PictBridge enabled printers. NOTE: Printing from the Gallery ( page 26 ) is not currently supported. Preparing the frame and printer for printing...

14 www.kodak.com/go/support Doing more with your frame Manually changing USB connection mode The connection mode must match the device you connect the frame to (computer or printer) before you make the connection. The default is Connect to computer. 1 Disconnect the printer or computer from the fram...

Doing more with your frame www.kodak.com/go/support 15 Copying between your frame and computer Copy pictures, videos, and music via the included USB cable. For wireless copying, see page 29 . Connecting to your computer Copying pictures to/from your computer Copy pictures, videos, and music between ...

16 www.kodak.com/go/support Doing more with your frame Copying pictures from EasyShare software It’s easy to copy pictures/videos from My Collection to your frame. 1 Install EasyShare software from the CD included with your frame ( see page 1 ). 2 Connect the USB cable ( see page 15 ). 3 On your com...

Doing more with your frame www.kodak.com/go/support 17 Selecting multiple pictures/videos Use the multi-select feature to copy, delete, or print two or more pictures; or to play a slide show of selected pictures/videos. Selecting one at a time 1 In thumbnails view, press to highlight a picture/video...

18 www.kodak.com/go/support 4 Changing frame settings The options in the Settings menu let you customize and configure your frame. 1 Press Home . 2 Press to highlight Settings , then press OK. 3 Press to select a setting. Follow the screen directions. Press OK to accept your selections. 4 Press to e...

20 www.kodak.com/go/support Changing frame settings Setting the clock and timer Setting the clock manually 1 Press Home , then select Settings and press OK. 2 Select Clock and timer and press OK. 3 Select Set time and press OK. 4 Press to adjust the hour and minutes. Press to highlight the next or p...

Changing frame settings www.kodak.com/go/support 21 Setting the clock automatically from the Internet 1 Press Home , then select Settings and press OK. 2 Select Clock and timer and press OK. 3 Select Get time from Internet and press OK. 4 Press to highlight Enable, then press OK. 5 Press to highligh...

22 www.kodak.com/go/support Changing frame settings Upgrading your firmware Firmware is the software that runs on your frame. Upgrade the firmware so you always have the newest features and improvements. To check for the latest version, visit www.kodak.com/go/digitalframedownloads . NOTE: Upgrading ...

Changing frame settings www.kodak.com/go/support 23 Automatically upgrade firmware from the Internet When the frame is connected to your wireless network, you can automatically upgrade the firmware from the Internet whenever a new version is available. A message appears on your frame when a new firm...

24 www.kodak.com/go/support 5 Using wireless mode For more information on wireless setup, operation, and networks, see the Wireless Setup Guide (included with EX model frames only) or visit www.kodak.com/go/wifisupport or www.wi-fi.org . What are the wireless features of my frame? Connect to your ho...

Using wireless mode www.kodak.com/go/support 25 Viewing pictures over your wireless network Pictures are accessed from your computer via Windows Media player 11. See the Wireless Setup Guide for details about installing or upgrading to Windows Media player 11. 1 Turn on your computer and your pictur...

26 www.kodak.com/go/support Using wireless mode 4 Press to highlight the category of pictures you want to view, then press OK. All Pictures displays every picture that your computer is sharing, without showing folders. The categories are established by Windows Media player 11; you designate pictures...

Using wireless mode www.kodak.com/go/support 27 Automatically receiving My Friends’ Albums Your wireless frame automatically notifies you when a friend shares pictures with you at the Gallery. Play a slide show of the new pictures, right on your frame, even before you see the email on your computer!...

28 www.kodak.com/go/support Using wireless mode Turning off auto-receive and notification You can turn off auto-receive and/or notification from your friends’ albums at the Gallery. 1 Press Home , then select Settings and press OK. 2 Select KODAK Gallery and press OK. 3 Press to highlight Auto-recei...

Using wireless mode www.kodak.com/go/support 29 Picture transfer software—copying wirelessly Kodak picture transfer software (included on the software CD packaged with your EX model frame) lets you wirelessly copy pictures and videos from the frame to your computer. Make sure you install the softwar...

30 www.kodak.com/go/support Using wireless mode Changing copy settings in picture transfer software 1 Right-click the Kodak picture transfer software icon in the lower right corner of your computer screen. 2 Select Configure to open the Kodak picture transfer software window. Use this window to: ■ E...

Using wireless mode www.kodak.com/go/support 31 Glossary of common wireless network terms Access point— (Also called AP.) A wireless network transceiver or “base station” hub, often used to connect a local area network to one or more wireless devices. An access point can also provide a communication...

32 www.kodak.com/go/support Using wireless mode Domain name— The portion of a URL or Web address that identifies a specific Web site. For example, the domain name portion of the URL http://www.kodak.com is kodak.com. All domain names have a suffix that indicates the top level domain (TLD) it belongs...

34 www.kodak.com/go/support Using wireless mode the unique SSID. An SSID can be broadcast by the network router, allowing devices to detect it as an available network. An SSID does not supply security to the network. SSL— Secure Sockets Layer: a commonly used encryption scheme used by many online re...

www.kodak.com/go/support 35 6 Troubleshooting and support For step-by-step product support, visit www.kodak.com/go/digitalframesupport and select Interactive Troubleshooting & Repairs. Picture frame problems Picture frame/computer communications If... Try one or more of the following Frame does ...

36 www.kodak.com/go/support Troubleshooting and support Wireless network connection For software installation and wireless frame setup, see the Wireless Setup Guide . Cannot copy pictures from Kodak EasyShare software. ■ Make sure your frame and computer are on. ■ Make sure the USB cable is securely...

Troubleshooting and support www.kodak.com/go/support 39 Screen messages Screen message Try one or more of the following Create file failed. The device (memory card, USB drive, camera, etc.) you are trying to copy to is protected. ■ See your device documentation to remove write protection. ■ Insert o...

www.kodak.com/go/support 41 7 Appendix Digital frame specifications For more specifications, visit www.kodak.com/go/digitalframesupport . Kodak EasyShare wireless digital picture frame Wi-Fi wireless network compatibility Wi-Fi 802.11b protocol—compatible with Wi-Fi wireless 802.11b and 802.11g netw...

Appendix www.kodak.com/go/support 43 Important safety instructions CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. Do not expose this product to liquid, moisture, or extreme temperatures. The use of controls, adjus...

44 www.kodak.com/go/support Appendix www.kodak.com/go/kes. ■ Do not charge non-rechargeable batteries. For more information on batteries, visit www.kodak.com/go/batterytypes . ■ Digital picture frame and remote control battery may include perchlorate material. Special handling may apply in Californi...

Appendix www.kodak.com/go/support 45 Limited warranty Kodak warrants Kodak consumer electronic products and accessories (“Products”), excluding batteries, to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sale...

46 www.kodak.com/go/support Appendix disclaims the implied warranties of merchantability and fitness for a particular purpose. In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the purchase date or such lo...

Appendix www.kodak.com/go/support 47 FCC compliance and advisory This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen...

48 www.kodak.com/go/support Appendix CE Hereby, Eastman Kodak Company declares that this Kodak product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This digital picture frame EX-811 and EX-1011 transmits in 12dBm. In France, the power level i...

Appendix www.kodak.com/go/support 49 Australian C-Tick MPEG-4 Use of this product in any manner that complies with the MPEG-4 visual standard is prohibited, except for use by a consumer engaging in personal and non-commercial activities. Russian GOST-R Korean Class B ITE Licensing Supply of this pro...

www.kodak.com/go/support 51 1 Index A about, frame, 20allow the frame, 30appendix, 41arrow buttons on remote, 3automatic on/off, 19, 21 B back button on remote, 3battery remote control, 41replacing, 2safety, 43 brightness, screen, 19buttons on back of frame, iion remote control, 3 C cables power, co...