Kodak E-2549 - Manual
Kodak E-2549 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTRUCTIONS; Do not squeeze the release bar during this step.; Stop Zone
- Page 3 – Operating Tips; Leave the control arm at
- Page 4 – Using the KODAK PROFESSIONAL READYLOAD Single-Sheet Packet; Film & Photofinishing Systems Group; EASTMAN KODAK COMPANY; PROCESSING; total darkness; MORE INFORMATION
©Eastman Kodak Company, 2007
August 2007
•
E-2549
TECHNICAL DATA /
REFERENCE
Using the KODAK PROFESSIONAL
READYLOAD Single-Sheet Packet
KODAK PROFESSIONAL READYLOAD Single-Sheet
Packets and the KODAK PROFESSIONAL READYLOAD
Packet Film Holder provide a very convenient way to
expose 4 x 5-inch sheet film.You can use them together as
a handy alternative to standard 4 x 5-inch sheet-film
holders.
You’ll have less equipment to carry, because you can use
a single holder to make as many exposures as you need.
The sealed packet also keeps light, fingerprints, and dust
safely away from the film.
Each READYLOAD Single-Sheet Packet contains one
sheet of 4 x 5-inch film, which is attached on both ends to
a leader and trailer. The lighttight outer envelope performs
the same function as a dark slide in a conventional
sheet-film holder.
KODAK PROFESSIONAL READYLOAD Single-Sheet
Packets
New READYLOAD Single-Sheet Packets offer these
features:
• One preloaded 4 x 5-inch sheet of film per packet
• Great ease and convenience of use—no darkroom or
loading bags required; lighter and less bulky than
standard 4 x 5-inch film holders
• Less time in the dark—no more film holders to load
and unload
• Protection against light leaks, dust, and dirt during use
• Protection against abrasions and fingerprints that can
occur while loading sheet-film holders
• Easy unloading for processing with standard
processing equipment
• Color-coded packet graphics for easy film
identification
• Compatibility with the POLAROID Model 545i Film
Holder
Film Availability
The films packaged in KODAK PROFESSIONAL
READYLOAD Single-Sheet Packets are listed below. Refer
to
www.kodak.com/go/readyload
for more information on
these films.
KODAK PROFESSIONAL READYLOAD Packet Film
Holder
This 4 x 5-inch film holder fits any standard press or view
camera, as well as many scientific and recording
instruments. The holder can replace or complement your
standard 4 x 5-inch sheet-film holders.
Use this holder to expose film packaged in KODAK
PROFESSIONAL READYLOAD Single-Sheet Packets. It
offers the following features:
• Accurate alignment and positioning in the film plane
• Light weight and easy to use
KODAK Film
CAT No.
PROFESSIONAL PORTRA 160VC Film
834 6926
PROFESSIONAL EKTACHROME E100G
840 3545
PROFESSIONAL EKTACHROME E100VS
825 4328
PROFESSIONAL T-MAX 100 / 100TMX
894 9281
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Using the KODAK PROFESSIONAL READYLOAD Single-Sheet Packet • E-2549 INSTRUCTIONS Using KODAK PROFESSIONAL READYLOAD Single-Sheet Packets in the KODAK PROFESSIONAL READYLOAD Packet Film Holder To expose the film, follow these steps: 1. Grasp the end of the packet and insert it into the holder until...
Using the KODAK PROFESSIONAL READYLOAD Single-Sheet Packet • E-2549 3 Operating Tips • When you insert and remove the packet, grasp the end of the envelope between your thumb and index finger. • When you squeeze and hold the release bar, keep it fully depressed. • Use a dark cloth when shooting outd...
Using the KODAK PROFESSIONAL READYLOAD Single-Sheet Packet Film & Photofinishing Systems Group EASTMAN KODAK COMPANY • ROCHESTER, NY 14650 Revised 8-07Printed in U.S.A. Using the KODAK PROFESSIONAL READYLOAD Single-Sheet PacketKODAK Publication No. E-2549 PROCESSING To unload the film from the p...
