Page 2 - Contents
A-61597 January 2008 i Contents Using the High-Resolution Printer Accessory . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Printed Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Configuring your print string . . . . . . . . . . . ...
Page 3 - Printed information; — you can select the orientation of the print; Normal; Kodak
A-61591 / Part#9E8651 January 2008 1 This guide provides instructions for using the High-Resolution Printer Accessory / for the Kodak i1800 Series Scanners. The High-Resolution Printer Accessory provides an effective way to apply information to the scanned document and use document management system...
Page 4 - : prints a single vertical line of characters (one character per; rotation; Rotation; Rotation; Rotation; This example shows 36 characters.; Rotation
2 A-61591 / Part #9E8651 January 2008 Format — select either single- or multi-character printing. • Single : prints a single vertical line of characters (one character per horizontal line). • Multi-character : prints a block of characters using multi-character printing. Following are examples of mul...
Page 5 - Format; — select either
A-61591 / Part#9E8651 January 2008 3 Configuring your print string Configuring your High-Resolution Printer is done via the TWAIN Datasource or ISIS Driver. Detailed procedures for configuring print strings can be found in the Image Processing Guide for Kodak i1800 Series Scanners , A-61580. NOTE: W...
Page 6 - Block; or
4 A-61591 / Part #9E8651 January 2008 If your application software uses the ISIS Driver, access the Printer tab and select Block or Normal mode.
Page 7 - To change the horizontal print position:
A-61591 / Part#9E8651 January 2008 5 Changing the horizontal print position The location of the information you want to print on a document is determined by the print position of the High-Resolution Printer Accessory within the scanner and the pre-defined print position. To change the horizontal pri...
Page 8 - Print Positions
6 A-61591 / Part #9E8651 January 2008 There are 6 horizontal print positions. These positions are visible on the printer rail. 3. Slide the printer along the print rail until it is in the desired position. The arrow on the printer cartridge carrier should be aligned with the desired print position. ...
Page 9 - You can omit printing on the next document by selecting the; option on the scanner touchscreen. You must select; Omit Print; before
A-61591 / Part#9E8651 January 2008 7 Changing the vertical print position The Print Test function allows you to print a “ladder” target where each vertical line is printed by one of the jets in the print head. If a line is missing, one of the jets is not working. Dabbing the print head with a Static...
Page 10 - The; button is only available if printing has been enabled; Disable Print; documents will be printed on until one of the following occurs:; Disable Print; • the scanner is disabled because there are no more documents to
8 A-61591 / Part #9E8651 January 2008 Omit printing on more than one document The Disable Print function allows you to temporarily disable printing on all documents in a batch. This may be useful if rescanning a stack of documents that have already been printed. The Disable Print function is only av...
Page 12 - Replace the printer cartridge when:
10 A-61591 / Part #9E8651 January 2008 Installing a new printer cartridge Replace the printer cartridge when: • printed characters appear light or uneven• missing characters are evident• a print test reveals inconsistent character quality• cleaning has not improved the overall print quality 1. Remov...
Page 14 - Print head
12 A-61591 / Part #9E8651 January 2008 6. Remove the protective tape from the bottom of the printer cartridge to expose the print head. NOTE: The photo above is for illustrative purposes only. When removing the tape from the printer cartridge the print head should be facing down. 7. Place the new pr...
Page 15 - Blue tab
A-61591 / Part#9E8651 January 2008 13 2. Rotate the release lever on the maintenance station and pull out the carrier. 3. Lift the blue tab on the carrier. 4. Insert the printer cartridge in the maintenance station as shown. 5. Close the blue tab and slide the carrier back into the maintenance stati...
Page 16 - Replacing ink trays
14 A-61591 / Part #9E8651 January 2008 Scanner maintenance guidelines when using the High-Resolution Printer Depending on printing needs, more frequent cleaning of the scanner may be required. In addition, ink trays need to be replaced periodically. Refer to the User’s Guide for the Kodak i1800 Seri...
Page 17 - Remove the soiled ink tray. You can replace one or both of the trays
A-61591 / Part#9E8651 January 2008 15 3. Remove the soiled ink tray. You can replace one or both of the trays as necessary. 4. Discard the soiled ink tray(s).5. Insert the new ink tray. 6. Replace the blotter strip cover. 7. Close the pod.
Page 18 - Scanner auto purging; Remove printer cartridge.; Printer cartridge care; Purge bar
16 A-61591 / Part #9E8651 January 2008 Scanner auto purging In order to maintain ink flow and prevent cartridges from drying out, the scanner will automatically purge the printer cartridge. Purging is a process that forces a small amount of ink out of the print head. This ink is deposited in the ink...
Page 20 - Troubleshooting; Problem; and that the expected print string has been specified.; Not printing; print position in the scanner.
18 A-61591 / Part #9E8651 January 2008 Troubleshooting Use the chart below as a guide to check possible solutions to problems you may encounter when using the High-Resolution Printer Accessory. Problem Possible Solution Print quality is poor or inconsistent Check the following:• Be sure the printer ...