Kodak A-61171_XX - Manual
Kodak A-61171_XX – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Description
- Page 3 – Message Listing; Kodak
- Page 4 – S2 sensor is blocked; Check for a document jam.; Settings conflict; Check to be sure all doors are closed.; Unable to execute command
i800 Series Scanners
Quick Reference Guide
A-61171_XX
The list below provides a summary of the icons displayed on the Operator
Control Panel. For procedures on how to use these functions, see the Multi-
media User’s Guide for the
Kodak
i800 Series Scanners (A-61170).
These functions can be performed when the scanner is disabled:
Displays information: including the last image address, meter
values, scanner serial number.
Lowers the elevator tray if it is not already in the lowest position.
Displays the Diagnostics Settings menu.
Calibrates the scanner.
Temporarily turns on the transport to help clear a document jam.
These functions can be performed when the scanner is enabled:
Increments the image address level.
Lowers the elevator tray if it is not already in the lowest position.
Performs the first programmable function.
Performs the second programmable function.
Performs the third programmable function.
When the Diagnostics Settings menu button is selected, these functions are
available:
Performs the selected function.
Moves left to the next selectable item.
Moves right to the next selectable item.
Moves up to the next selectable item.
Moves down to the next selectable item.
Programmable key functions are assigned at application setup. Check with your
System Administrator for key assignments. Available functions are:
•
No Scanner Functionality (default)
•
Scanner End-of-Job
•
Terminate Batch
•
Omit Multi-feed Detection on Next Document
•
Omit Printing on Next Document
•
Omit Patch Reading on Next Document
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Operator Control Panel display Supplies Contact your scanner supplier to order supplies; such as, lamps, cleaning materials, and replacement parts. To order consumables visit our on-line ordering web page: www.kodak.com/go/shop. Description CAT No. Calibration Target (Qty 50) 149 1869 Emulsiclean W ...
Message Listing Following is a list of messages and corrective actions you can take if one of the following messages appears on the Operator Control Panel. Most corrective actions can be found in the Multi-media User’s Guide for the Kodak i800 Series Scanners. Calibrate scanner now You must calibrat...
S2 sensor is blocked Check for a document jam. Self-test failed Power down the scanner and try again. Settings conflict Conflicting or unacceptable settings have been downloaded to the scanner. Unable to enable Check to be sure all doors are closed. Unable to execute command You have attempted a com...
