Kodak 7272TM - Manual
Kodak 7272TM – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – EASTMAN Color Internegative II Film 5272; PRINTING CONDITIONS
- Page 3 – Characteristic Curves; Spectral-Sensitivity Curves
- Page 4 – Professional; AVAILABLE ROLL LENGTHS; HOLLYWOOD, CALIFORNIA
©Eastman Kodak Company, 1998
June 1998
•
H-1-5272
TECHNICAL DATA / COLOR INTERMEDIATE FILM
EASTMAN Color Internegative II
Film 5272
™
/ 7272
™
DESCRIPTION
EASTMAN Color Internegative II Film 5272 (35 mm) and
7272 (16 mm) is a medium-speed film with excellent
image-structure characteristics and color-correction
masking. It is intended for making 35 mm or 16 mm
internegatives from reversal color originals on
EASTMAN EKTACHROME Film 7240™. This film is
balanced for printing with tungsten illumination with
suitable filters in the light path. The internegatives can then
be printed onto KODAK Color Print Film and EASTMAN
EXR Color Print Film.
BASE
This film has a clear acetate safety base with rem-jet
backing.
DARKROOM RECOMMENDATIONS
Do not use a safelight. Handle unprocessed film in total
darkness.
STORAGE
Store unexposed film at 13˚C (55˚F) or below. Process
exposed film promptly. Store processed film at 21˚C
(70˚F) or lower at a relative humidity of 40 to 50 percent
for short-term commercial storage; for long-term storage,
store it at 2 to 10˚C (35 to 50˚F) at 15- to 30-percent
humidity. For more information on long-term storage, see
KODAK Publication H-23, The Book of Film Care.
RECIPROCITY CHARACTERISTICS
You do not need to make any exposure or filter
adjustments for exposure times from 1/1000 to 1/10
second. For exposure time of either 1 or 5 seconds,
increase exposure by
1
⁄
2
stop and use a KODAK Color
Compensating Filter 10Y.
PROCESSING
Most commercial motion-picture laboratories provide a
processing service for this film. Pre-packaged kits are also
available for preparing the processing solutions. For more
information on the EASTMAN ECN-2 Kit Chemicals,
check Kodak’s Professional Motion Imaging Price
Catalog or see a Kodak sales representative in your
country. See KODAK Publication No. H-24, Manual for
Processing KODAK Motion Picture Films, Process ECN-2
Specifications, Module 7, for more information on the
solution formulas and the procedures for continuous
machine processing this film.
IDENTIFICATION
After processing, the product code numbers 5272 and
7272; emulsion and roll number identification;
EASTMAN KEYKODE Numbers; and a film
identification code (S) are visible along the length of the
film.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 EASTMAN Color Internegative II Film 5272 ™ / 7272 ™ • H-1-5272 LABORATORY AIM DENSITY (LAD)CONTROL METHOD To maintain optimum quality and consistency in the finalprints, the laboratory must carefully control the colortiming, printing, and duplicating procedures. LaboratoryAim Density (LAD) Control...
EASTMAN Color Internegative II Film 5272 ™ / 7272 ™ • H-1-5272 3 Characteristic Curves Spectral-Dye-Density Curves Note: While the data presented are typical of productioncoatings, they do not represent standards which must be metby Kodak. Varying storage, exposure, and processingconditions will aff...
EASTMAN Color Internegative II Film 5272 ™ / 7272 ™ Professional Motion Imaging EASTMAN Color Internegative II Film5272 ™ / 7272 ™ KODAK Publication No. H-1-5272 CAT 826 1851 Major Revision 6-98 Printed in U.S.A. AVAILABLE ROLL LENGTHS For information on film roll lengths, check Kodak’sProfessional ...
