Kodak 70 - Manual
Kodak 70 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Using the Multi-Feed Detector; Introduction; All
- Page 4 – Skewed document - refeed; To calibrate the thickness threshold follow the steps below:; Start the transport by pressing the green Run key.
- Page 7 – Error recovery; Interactive/online method; Follow these steps to use the Interactive/Online method:
- Page 8 – them into the feed tray or at the top of the next stack of documents.; Troubleshooting; Both Multi-Feed Detector buttons are constantly illuminated:; Condition; Detector
- Page 9 – Both Multi-Feed Detector buttons are not constantly illuminated:; Encountered a skewed document.; Press the green Run button to continue.; Document feed missed the sensor during calibration.
User’s
Guide
A-61120
Part No. 1E8110
Multi-Feed Detector
For use with the:
Document Scanner 9500
Document Scanner/Microimager 990
Kodak Imagelink Scanners 900 and 923
Kodak Imagelink Microimager 70
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
A-61120 March 1999 1 Using the Multi-Feed Detector Introduction The Kodak Digital Science Multi-Feed Detector aids in document processing by detecting documents that may go through the feederone on top of the other. Multi-feeds can easily happen due to dampdocuments, adhesives on documents, electros...
A-61120 March 1999 3 F72 Skew/Double Detection On/Off — allows you to use a function codeto enable and disable the system. The lights do not change. When a multi-feed is detected, both buttons illuminate. Depending upon thescanner or scanner/microimager firmware and how the unit is configured,one of...
6 A-61120 March 1999 5. Close the front cover. 6. If desired, calibrate and re-enable the Multi-Feed Detector . See the section entitled, “Calibrating the Multi-Feed Detector ” for more information. Error recovery Error recovery methods are required when a multi-feed has beendetected. The two method...
