Kobalt KPS 80-06 User Manual - Free PDF Download

Page 2 - TABLE OF CONTENTS

kobalttools.com 2 TABLE OF CONTENTS Product Specifications ...................................................................................................... ........ 3 Package Contents .................................................................................................................

Page 3 - Handle pole; PRODUCT SPECIFICATIONS

kobalttools.com 3 PACKAGE CONTENTS PART DESCRIPTION QUANTITY A Handle pole 1 B Extension pole 1 C Power head pole 1 PRODUCT SPECIFICATIONS Type Batter y Bar Length Chain Pitch Chain Type Guide Bar Type Weight Cordless, Batter y-powered 40 V Lithium-ion 8 in. (20.3 cm) 3/8 in. (9.5 mm) 91PJ033 080NDE...

Page 5 - • Do not operate in poor lighting.

kobalttools.com 5 SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. Save these Instructions SAFETY INFORMATION Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fi...

Page 6 - CAUTION: Chain coasts after being turned off.

kobalttools.com 6 • Keep firm footing and balance. Do not overreach. Overreaching can result in loss of balance.• Keep all parts of your body away from any moving part.• Inspect the unit before each use for loose fasteners, etc. Replace any damaged parts before use.• When not in use, product should ...

Page 7 - SAFETY INFORMATION; when tension in wood fibers are released.; Service

kobalttools.com 7 SAFETY INFORMATION • Use extreme caution when cutting small sized brush and saplings because slender material may catch the saw chain and be whipped toward you or pull you off balance. • When cutting a limb that is under tension, be alert for spring back so that you will not be str...

Page 8 - • If any parts are damaged or missing, please call; PREPARATION

kobalttools.com 8 WARNING • If any parts are damaged or missing, do not operate this product until the parts are replaced. Failure to heed this warning could result in serious personal injury. • Do not attempt to modify this product or create accessories not recommended for use with this product. An...

Page 9 - careless. Remember that a careless fraction of a second; IMPORTANT

kobalttools.com 9 A H ASSEMBLY INSTRUCTIONS Connecting the polesBefore using the pole saw, assembly is required. When removed from the box, there are three parts. • Remove packaging material and discard. • Insert the extension pole (B) into the handle pole (A) and slide together. • Lower the collar ...

Page 10 - OPERATING INSTRUCTIONS; should hear a “click” once it is installed.; IMPORTANT: The battery may not be charged when; adjusting, or performing maintenance on any part of the pole saw.; WARNING

kobalttools.com 10 OPERATING INSTRUCTIONS To install the battery:1. Align the battery (not included) with the battery opening.2. Insert the battery into the battery opening until the battery release button (I) locks into place. 3. Push down on the battery until it locks into place. You should hear a...

Page 11 - To lock out the trigger, you can pull back the; Adjusting pole saw height; to keep proper balance.; Preparation for cutting; tightness during use to avoid serious injury.

kobalttools.com 11 OPERATING INSTRUCTIONS Starting and stoppingA. To start the motor: • Press the safety lock button (G). Squeeze the trigger switch (J) to start. • Release the trigger switch (J) to stop. Note: To lock out the trigger, you can pull back the safety lock with your thumb. To unlock the...

Page 12 - cut. This will help steady the limb and make it; Cutting Guide; which the branch will fall.; Final Cut

kobalttools.com 12 OPERATING INSTRUCTIONS • Release the trigger as soon as the cut is completed. Failure to follow proper cutting procedures will result in the bar and chain binding and becoming pinched or trapped in the limb. If this should happen: • Stop the motor and remove the battery from the p...

Page 13 - • Keep the tree between you and the chain while; CARE AND MAINTENANCE; or cause product damage.; General Maintenance; should be performed by authorized service centers.; Minimum

kobalttools.com 13 OPERATING INSTRUCTIONS • Keep the tree between you and the chain while limbing. Cut from the side of the tree opposite of the branch you are cutting. • Do not cut from a ladder; this is extremely dangerous. Leave this operation for professionals. • Do not make the flush cut next t...

Page 14 - • Release chain tension by turning the tension; Lock knob

kobalttools.com 14 CARE AND MAINTENANCE Chain & Bar Assembly • Release chain tension by turning the tension During use, the chain will stretch and become dull. Debris and saw dust can also collect underneath the bar cover. Use the following steps to maintain your pole saw and chain. adjustment s...

Page 15 - Bar Stud Slot

kobalttools.com 15 CARE AND MAINTENANCE • To replace the bar and chain, loop the chain over the sprocket and place the bar against the bar stud slot. • Ensure that the chain tensioning pin is located in the tensioning hole on the chain bar. • Also ensure that the rubber block and chain bar are free ...

Page 16 - • Using a screwdriver on the tension adjustment screw,; Tension Adjustment Screw

kobalttools.com 16 CARE AND MAINTENANCE • Using a screwdriver on the tension adjustment screw, turn clockwise. • Turn clockwise until there is enough play that the chain can be pulled away from the bar, but not so much that the runners can be pulled out of the bar. • Once you have the correct tensio...

Page 17 - Chain tension; Stop the motor and remove the battery before; Flats

kobalttools.com 17 Chain tension • Stop the motor and remove the battery before setting the chain tension. Turn the bar cover knob counterclockwise to loosen the bar cover but do not remove the bar cover. Turn the chain tensioning screw clockwise to tension chain. Turn the guide bar knob clockwise t...

Page 18 - Use Premium Bar and Chain Lubricant. It is designed; Chain oiler; Bar Lube Reservoir

kobalttools.com 18 CARE AND MAINTENANCE • Use Premium Bar and Chain Lubricant. It is designed for chains and chain oilers and is formulated to perform over a wide temperature range with no dilution required. • Remove the cap and carefully pour approximately 2 oz (57 g) of bar and chain lubricant int...

Page 20 - cutters in one direction. Then move to the other side; CAUTION

kobalttools.com 20 CARE AND MAINTENANCE • each return stroke. • cutters in one direction. Then move to the other side brush. Dull or improperly sharpened chain can cause excessive motor speed during cutting which may result in severe motor damage. CAUTION Improper chain sharpening increases the pote...

Page 22 - PART; Oil tank cap

kobalttools.com 22 REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST, Monday - Friday. Printed in China Kobalt ® is a registered trademark of LF, LLC. All Rights Reserved. PART DESCRIPTION PART # F Oil tank cap ...