Knoll PRM150 - Manual
Knoll PRM150 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – DIGITAL ISOLATED OUTLETS; - All outlets use a state of the art emi filter; VERSATILE POWER ON/OFF OPTIONS
- Page 3 – Ask you power
- Page 6 – Warranty; Knoll Systems
PRM150, PRM200
Advanced Power Conditioners
Installation Instructions
v1.1
Warning
: To be installed and/or used in accordance with appropriate electrical
codes and regulations
Introduction:
Thank you for your purchase of a Knöll PRM150 or PRM200 Advanced
Power Conditioner and congratulations on your choice. This specially made
conditioner is designed specifically to reduce noise and hum pickup by sensitive
equipment when ultra-low-noise is a must as well as surge suppression to protect
your valuable electronics.
FEATURES:
•
PRM150
rated for 15 amps,
PRM200
rated for 20 amps (with special power
plug)
•
Push button or 4-24 VDC trigger power on/off
•
2210 Joules surge protection
•
Eight rear panel, heavy duty AC outlets includes two unswitched, and six
sequence delayed switched outlets with Digital Isolated Outlets
•
Main power cord is a 10 foot, ultra heavy duty 14 Ga. (PRT200 8 foot 12 ga.)
for easy access to a wall socket
•
Rear panel cable TV connectors for surge protection and noise filtering with
satellite or cable TV
•
One rack space
ADVANCED SURGE SUPPRESSION
- Edge-of-the-art two level suppression with
an astounding 2210 Joules of lightning protection (most current competitive units
only have 360) in the AC power line! Add the cable TV, satellite dish and telephone
line protection and you have 3590 joules of total protection!
In the event the unit does not power up after a surge, a small internal board
replacement may be all it takes to keep on protecting your sound and picture quality
as well as your investments.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Coaxial surge suppression is often over looked. A convenient “F” connector is provided both for cable TV and the satellite dish. This allows full surge protection through a low loss pass through connection. Telephone line surge protection is provided to bring an added measure of safety to your home....
Installation: The PRM200 power source connection must be adequate for use at 20 amps. We recommend a properly grounded 30-amp circuit, wired with 10-gauge wiring, if continuous operation near 20 amps is anticipated. A dedicated (nothing else connected) 20-amp circuit is the minimum acceptable to com...
PRM150 and PRM200 SPECIFICATIONS Current rating: PRM150 15 amps (1800 watts at 60/120 VAC, 60 HZ) fuse protected. PRM200 20 amps (2400 watts at 60/120 VAC, 60 HZ) fuse protected. Voltage Ranges: 90-135 VAC 60 Hz Remote trigger voltage: 3-24 VDC (input impedance 1k ohm) Clamping Voltage 250v peak (17...
