Page 2 - English; Contents; Connecting Wires to Terminals
— 2 — English Contents Safety precautions......................3 About GSM Hands Free Unit .....5 About CDs ...................................5 Notes on playing MP3 ................6 General features .........................8 PowerSelecting the SourceVolumeSystem QAudio ControlSpeaker SettingSwitc...
Page 3 - Safety precautions
— 3 — To prevent injury and/or fire, take thefollowing precautions: • Insert the unit all the way until it is fully locked in place. Otherwise it may fly out ofplace during collisions and other jolts. • When extending the ignition, battery, or ground wires, make sure to use automotive-grade wires or...
Page 4 - Lens Fogging; NOTE; Cleaning the Faceplate Terminals
— 4 — English • If you experience problems during installation, consult your Kenwood dealer. • If the unit does not seem to be working right, try pressing the reset button first. Ifthat does not solve the problem, consultyour Kenwood dealer. • Press the reset button if the Disc auto changer fails to...
Page 6 - Notes on playing MP3; • Transfer bit rate: 8 —320 kbps; file
— 6 — English Notes on playing MP3 This unit can play MP3(MPEG1, 2, 2.5 Audio Layer 3). Note,however, that the MP3 recording media and formats acceptableare limited. When writing MP3, pay attention to the followingrestrictions. Acceptable media The MP3 recording media acceptable to this unit are CD-...
Page 7 - MP3 playing order; When a File Search is executed with file
— 7 — MP3 playing order When selected for play, Folder Search, File Search, or for FolderSelect, files and folders are accessed in the order in which they werewritten by the CD writer. Because of this, the order in which they are expected to be playedmay not match the order in which they are actuall...
Page 8 - Volume; Source required; Tuner; Selecting the Source; Turning ON the Power; Power; General features
Increasing Volume Turn the [VOL] knob clockwise. Decreasing Volume Turn the [VOL] knob counterclockwise. Volume Press the [SRC] button. Source required Display Tuner "TUNER" CD "CD" External disc ( Optional accessory) "DISC CH"/ "CD2" Auxiliary input ( Optional access...
Page 9 - Audio Control; Sound setting; System Q
switch as shown below. 4 Adjust the Audio itemPress the [ 4 ] or [ ¢ ] button. Adjustment Item Display Range Bass level "Bass"/ "BAS" –8 — +8 Middle level "Middle"/ "MID" –8 — +8 Treble level "Treble"/ "TRE" –8 — +8 Balance "Balance"/ "BAL&...
Page 10 - Switching Display
In Tuner source Information Display Program Service name or FrequencyRadio text,Program Service name or Frequency "R-TEXT" Clock The frequency is displayed during Program Service namereceptionPress the [DISP] button for at least 1 second. The frequency for the RDS station will be displayed f...
Page 11 - Auxiliary Input Display Setting; In MP3 source; In Auxiliary input source; Information
Selecting the display when this device is switched to Auxiliaryinput source. 1 Select Auxiliary input sourcePress the [SRC] button. Select the "AUX1" display. 2 Enter Auxiliary input display setting modePress the [DISP] button for at least 2 seconds. The presently selected AUX Name is blinks...
Page 12 - TEL Mute; Push the faceplate in until it clicks.; Reattaching the Faceplate; Theft Deterrent Faceplate
The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed.The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes backON. When the call ends Hang up the ph...
Page 13 - Tuner features
Tuner features — 13 — Function of the KDC-M6024G/KDC-M6024/KDC-V6524/KDC-6024 Turning the Non-fading output ON or OFF. Press the [NF] button for at least 1 second. Each time the button is pressed Non-fading output switches ONor OFF.When it’s ON, "NF ON" is displayed. Non-fading Output 1 – 6 ...
Page 14 - Auto Memory Entry; Putting the station in the memory.; Station Preset Memory; Selecting the station.; Tuning
Putting a station with good reception in the memoryautomatically. 1 Select the band for Auto Memory EntryPress the [FM] or [AM] button. 2 Enter Menu modePress the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select the Auto Memory Entry modePress the [FM] or [AM] button. Selec...
Page 15 - RDS features; Calling up the stations in the memory.; Preset Tuning; PTY indicator
RDS features Calling up the stations in the memory. 1 Select the bandPress the [FM] or [AM] button. 2 Call up the stationPress the desired [1] — [6] button. Preset Tuning — 15 — 1 – 6 ¢ 4 FM AM DISP PTY TI KDC-M6024G/M6024/V6524/6024 KDC-5024/5024V/507/5094R PTY indicator PTY indicator TI indicator ...
Page 16 - Selecting the Program Type and searching for a station.; Display; Scrolling the displayed radio text.; Radio Text Scroll; Receiving other traffic information stations; Traffic Information
Selecting the Program Type and searching for a station. 1 Enter PTY modePress the [PTY] button. During PTY mode the "PTY" indicator is ON. This function can't be used during a traffic bulletin or AM reception. 2 Select the Program TypePress the [FM] or [AM] button. Each time the button is pr...
Page 17 - Presetting the Program Type; Select the Program Type to preset; Calling up the preset Program Type; Enter PTY mode; Program Type preset
Putting the Program Type in the Preset button memory andcalling it up quickly. Presetting the Program Type 1 Select the Program Type to preset Refer to <PTY (Program Type)> (page 16). 2 Preset the Program TypePress the desired [1] — [6] button for at least 2 seconds. Calling up the preset Prog...
Page 18 - Selecting the Program Type display language.; Changing Language for PTY Function; Disc number
CD/MP3/External disc control features Selecting the Program Type display language. 1 Enter PTY mode Refer to <PTY (Program Type)> (page 16). 2 Enter Changing Language modePress the [DISP] button. 3 Select the languagePress the [FM] or [AM] button. Each time the button is pressed the language s...
Page 19 - When there is no disc inserted; When a disc is inserted
3 Press the faceplate on the left side, and return it to its formerposition. 3 in. (8cm) disc can't be played. Using an adapter and inserting theminto this unit can cause damage. The MP3 media that this unit can play are CD-ROM, CD-R, and CD-RW.The medium formats must be ISO 9660 Level 1, Level 2, J...
Page 20 - In CD & External disc source; Repeat play; Searching for a song on the disc or in the MP3 folder.; Fast Forwarding and Reversing; Pause and play; Playing External Disc
Replaying the song, disc in the Disc changer or MP3 folderyou're listening to. Press the [REP] button. Each time the button is pressed the Repeat Play switches asshown below. In CD & External disc source Repeat play Display Track Repeat "(T-)Repeat ON"/ "(T-)REP ON" Disc Repeat (...
Page 21 - Magazine Random Play; Play all the songs on the disc or MP3 folder in random order.; Random Play; File Repeat
Play the songs on all the discs in the disc changer in randomorder. Press the [M.RDM] button. Each time the button is pressed the Magazine Random Play turnsON or OFF.When it's ON, "M-Random ON"/ "MRDM ON" is displayed. When the [ ¢ ] button is pressed, the next song select starts. Ma...
Page 22 - Attaching a title to a CD.; Play the disc you want to attach a name to; Repeat steps 3 through 5 and enter the name.
Attaching a title to a CD. 1 Play the disc you want to attach a name to • A title can't be attached to a MD.• Refer to the <Switching Display> (page 10) and select the "DNPS" display. 2 Enter name set modePress the [NAME.S] button for at least 2 seconds. "NAME SET" is displayed...
Page 23 - Menu system
Menu system Scrolling the displayed CD text, MP3 text, or MD title. Press the [DISP] button for at least 1 second. Text/Title Scroll • When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes. • Media that you can attach names to - Internal CD player: 30 (KDC...
Page 24 - Repeat steps 4 and 5, and complete the Security Code.; Security Code; Example: When you want to set the beep sound select the; Menu System
When the Security Code function is activated it can't be released.Note, your Security Code is the 4 digit number entered in your "CarAudio Passport" in this package. 1 Enter StandbyPress the [SRC] button. Select the "ALL OFF" display. 2 Enter Menu modePress the [MENU] button for at l...
Page 25 - Synchronize Clock; The clock display blinks.; Manual Clock Adjustment; minutes
A red indicator will blink on the unit after the faceplate isremoved, warning potential thieves. Display Setting "DSI ON" LED flashes. "DSI OFF" LED OFF. DSI (Disabled System Indicator) Synchronizing the RDS station time data and this unit's clock. Display Setting "SYNC ON" S...
Page 26 - Adjusting the display contrast.; Contrast Adjustment; You can set the display to a desired color.; Illumination Color Setting; Setting the Display type.; Switching Display Type; Selecting the button illumination color as green or red.; Selectable Illumination
Adjusting the display contrast. Display and Setting "Contrast 0"/ "CONT 0" "Contrast 5"/ "CONT 5" (Original setting) "Contrast 10"/ "CONT 7" … … Contrast Adjustment Button Color [1] Silky White [2] Red [3] Blue [4] Blue Green Selecting the Color mode P...
Page 27 - Sets the tuning mode.; Tuning Mode; News Bulletin with Timeout Setting
Sets the tuning mode. Tuning mode Display Operation Auto seek "Auto 1"/ Automatic search for a station. "AUTO 1" Preset station seek "Auto 2"/ Search in order of the stations "AUTO 2" in the Preset memory. Manual "Manual"/ Normal manual tuning control. "MA...
Page 28 - Switch the display of the External Display connected to this unit.; External Display Control
Function of the KDC-M6024G/KDC-M6024/KDC-V6524/KDC-6024 Switch the display of the External Display connected to this unit. Display "OEM DISP" Each time the [ 4 ] or [ ¢ ] button is pressed the display switches. External Display Control Noise can be reduced when stereo broadcasts are received...
Page 29 - CD Read Setting; Power OFF Timer function is OFF.; Power OFF Timer; Setting the displayed text scroll.; Text Scroll
Function of the KDC-M6024G/KDC-M6024 When there is a problem on playing a CD with special format,this setting play the CD by force. Display Setting "CD READ 1" Play CD and MP3. "CD READ 2" Play CD by force. Setting "CD READ 2" cannot play MP3.Some music CDs may not be played ...
Page 30 - Accessories; External view
English — 30 — The use of any accessories except for those provided might result indamage to the unit. Make sure only to use the accessories shipped withthe unit, as shown above. 1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Make the ...
Page 31 - Connector A; Connector Function Guide; Pin Numbers for; Cable Colour
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 TEL MUTE P.CONT ANT.CONT FRONT REMO.CONT — 31 — Rear rightoutput (Red) 4 /Non-fading right output (KDC-M6024G/M6024/ V6524/ 6024 only) (Red) 25 Front left output (White) 10 (KDC-M6024G/M6024/V6524/6024 only) Rear left output (White) 12 / Non-fading left output (KDC-M6...
Page 32 - Connecting the ISO Connector; If the ISO connector pins are set as described in; Please be sure to reconnect the cable as shown
English — 32 — Connecting Wires to Terminals Connecting the ISO Connector The pin arrangement for the ISO connectors depends on the type ofvehicle you drive. Make sure to make the proper connections toprevent damage to the unit.The default connection for the wiring harness is described in 1 below. I...
Page 33 - Installation
— 33 — Installation Make sure that the unit is installed securely in place. If the unit isunstable, it may malfunction (eg, the sound may skip). Bend the tabs of themounting sleevewith a screwdriver orsimilar utensil andattach it in place. Metal mountingstrap (commerciallyavailable) Self-tappingscre...
Page 34 - Removing the hard rubber frame
English — 34 — Catch Lock Accessory 2 Removal tool — 34 — ■ Removing the hard rubber frame 2 When the upper level is removed, remove the lower twolocations. The frame can be removed from the bottom side in the same manner. 1 Engage the catch pins on the removal tool and remove the twolocks on the up...
Page 35 - General; Troubleshooting Guide
— 35 — What might seem to be a malfunction in your unit mayjust be the result of slight misoperation or miswiring.Before calling service, first check the following tablefor possible problems. General ? The power does not turn ON. 01 ✔ The fuse has blown. ☞ After checking for short circuits in the wi...
Page 36 - Tuner source
— 36 — English ? Non-fading output, Non-fading Low Pass Filter and Non-fadingsetting can’t be done. 28 ✔ The <Switching preout> (page 27) is set on Rear preout. ☞ Set it on Non-fading preout. ✔ The <Non-fading output> (page 13) is OFF. 29 ☞ Turn it ON. Tuner source ? Radio reception is p...
Page 38 - Specifications subject to change without notice.; Specifications
— 38 — English FM tuner section Frequency range (50 kHz space) ..............87.5 MHz – 108.0 MHz (KDC-5094R FM1; 30 kHz space) .............65 MHz – 74.0 MHz Usable sensitivity (S/N = 26dB) ................................ 0.7 µV /75 Ω KDC-5094R FM1 .......................... 1.4 µV /75 Ω Quieting ...
