Kenwood KDC-C667- User Manual
Kenwood KDC-C667– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Warning / Safety precautions; IMPORTANT INFORMATION; Connections; CAUTION
- Page 3 – Loading compact discs; Installation
- Page 4 – In case of hanging in the trunk; Vertical installation
KDC-C717
KDC-C667
COMPACT DISC AUTO CHANGER
INSTRUCTION MANUAL
©B64-1801-20 (MW)
Troubleshooting Guide
Specifications
Specifications subject to change without notice.
Laser diode ..................................................................................................GaAlAs (
λ
=780 nm)
Digital Filter ..............................................................................................8 Time Over Sampling
D/A Converter .......................................................................................................................1 bit
Spindle speed.............................................................................................500 ~ 200 rpm (CLV)
Wow & Flutter ......................................................................................Below Measurable Limit
Frequency Response (±1 dB) ...............................................................................5 Hz ~ 20 kHz
Total harmonic distortion (1 kHz) ...................................................................................0.005 %
Signal to Noise Ratio ........................................................................................................100 dB
Dynamic range ...................................................................................................................94 dB
Channel separation.............................................................................................................96 dB
Operating voltage ...........................................................................14.4 V (11 ~ 16 V allowable)
Current consumption ................................................................................0.8 A at Rated power
Dimensions (W
×
H
×
D)
(KDC-C717) ........................................250
×
80
×
176 mm (9-13/16
×
3-1/8
×
6-13/16 in.)
(KDC-C667) ........................................250
×
64
×
176 mm (9-13/16
×
2-1/2
×
6-13/16 in.)
Weight (KDC-C717) ............................................................................................2.0 kg (4.4 LBs)
Weight
(KDC-C667) ............................................................................................1.8 kg (4.0 LBs)
When removing the CD changer, be sure to first eject a magazine then unplug the changer cord. Do
not forget to attach the transport screws before transporting the CD changer.
The CD changer may be damaged during transport if a magazine or CD is left inside it or the transport
screws are not attached.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Sound skips due to vibra-
tion.
The disc changer mode
cannot be selected.
• The unit is mounted at a slant.
• Changer unit is mounted in an
unstable place.
• The angle adjustment switches
are set improperly.
The O-N selection switch of the
disc changer is not set properly.
• Mount the unit so that is level.
• Mount the unit in a stable place.
• Set the angle adjustment
switches to the correct posi-
tions.
Set the O-N selection switch to
"O" position.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Kenwood KDC-C667
Summary
Control unitChanger switchingunitO-N switch setting Warning / Safety precautions The marking of products using lasers(Except for some areas) The label is attached to the chassis/case andsays that the component uses laser beams thathave been classified as Class 1. It means thatthe unit is using laser...
■ Accessories A × 1 B × 4 C × 4 D × 1 E × 1 ■ Removing the transportation screws Remove all 3 transportation screws for protecting theinternal mechanism before you start to install the unit. After removing the transport screw, retain it carefully andattach it again before transporting the unit again...
■ In case of hanging in the trunk 90 0 45 90 0 45 90 0 45 90 0 45 90 0 45 90 0 45 90 0 45 90 0 45 KDC-C667 KDC-C717 Use the holes marked ● to install the unit. Do not tighten the screw B too securely at the time of installation, but tighten it securely after having fixed the bracket A . 2 CAUTION ■ ...
