Kawasaki 840116 - Manual
Kawasaki 840116 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Failure to; TABLE OF CONTENTS
- Page 3 – Wash hands after handling.
- Page 4 – FIGURE 1. CONNECTING THE DRILL PRESS TO THE AC POWER RECEPTACLE
- Page 5 – IMPORTANT SAFETY RULES FOR DRILL PRESSES
- Page 7 – Use clamps or a vise to hold workpiece securely in place.
- Page 8 – Ensure the spindle taper (Q) and the tapered hole in the; INSTALLING THE DRILL CHUCK; Open the jaws of the drill; INSTALLING THE WORK TABLE; Position the worktable to the desired height; INSTALLING HANDLES; Insert the three drill press feed han-
- Page 9 – MOUNTING THE DRILL PRESS
- Page 10 – OPERATING THE LASER
- Page 11 – ADJUSTING THE WORK TABLE; After the table is positioned at the; OPERATING THE DRILL PRESS; to the; LOCKING THE “ON/OFF” SWITCH
- Page 12 – DRILLING HOLES TO SPECIFIED DEPTHS; ADJUSTING DRILL PRESS SPEED; When returning the table to the level
- Page 13 – ADJUSTING SPINDLE
- Page 15 – YEAR LIMITED HOME USE WARRANTY
8" BENCH DRILL PRESS
INSTRUCTION MANUAL
FOR CUSTOMER SERVICE
POUR LE SERVICE APRÉS VENTE
OU DU CONSOMMATEUR
PARA EL SERVICIO
PARA EL CONSUMIDOR
1-800-590-3723
Printed in China
87-1904-60957
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™
MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR
DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE
DIRECTED TO:
©COPYRIGHT 2005 ALLTRADE TOOLS, LLC.
1431 VIA PLATA
LONG BEACH, CA 90810-1462 USA
840116 – 8" Bench Drill Press_Rev 11/13/06
MODEL
#840116
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO
SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE
DEPARTMENT AT
1-800-590-3723
. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION
AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE
A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT: [email protected].
YOUR FEEDBACK IS VITAL TO US.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SECTION FOUR MAINTENANCE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-26SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
GENERAL SAFETY RULES – FOR ALL ELECTRIC POWER TOOLS READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. KEEP GUARDS IN PLACE AND IN WORKING ORDER. REMOVE ADJUSTING KEYS AND WRENCHES. Form a habit of ...
This drill press is equipped with a grounded 3-wire power cord with a 3-prong plug.If the power cord will not fit into the wall plug, an approved adapter can be used aslong as it is connected to the center screw in the wall plate. See Figure 1 and thesteps below to use an AC grounding adapter: 1. Re...
