Kawasaki 840091 - Manual

Kawasaki 840091

Kawasaki 840091 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
Page: / 20

Table of Contents:

  • Page 2 – Failure to; TABLE OF CONTENTS
  • Page 4 – FIGURE 1. CONNECTING THE DRILL PRESS TO THE AC POWER RECEPTACLE
  • Page 5 – IMPORTANT SAFETY RULES FOR DRILL PRESSES
  • Page 7 – That is, the sliding ruler and the; SLOTTED SCREWDRIVER; Assemblies
  • Page 8 – FIGURE 3. ATTACHING SUPPORT LOCK AND
  • Page 9 – FIGURE 7. INSTALLING
  • Page 10 – FIGURE 10. ADJUSTING
  • Page 11 – FIGURE 13. INSTALLING
  • Page 12 – FIGURE 15. INSTALLING; LASER RADIATION
  • Page 13 – Turn the laser switch to the ON position.; OPERATING THE DRILL PRESS; FIGURE 17. ADJUSTING THE LASER LIGHT
  • Page 14 – FIGURE 18. INSERTING THE DRILL BIT
  • Page 15 – SETTING THE DRILLING DEPTH ADJUSTMENT; Apply the AC power and turn the ON/OFF switch to the “ON” position.; ADJUSTING THE SPINDLE RETURN SPRING; of the head from the feed handles.; ROTATING THE WORKTABLE
  • Page 19 – The above; COMMERCIAL OR RENTAL PURPOSE.
Loading the manual

MODEL

#840091

FOR CUSTOMER SERVICE

POUR LE SERVICE APRÉS VENTE

OU DU CONSOMMATEUR

PARA EL SERVICIO

PARA EL CONSUMIDOR

1-800-590-3723

Printed in China

87-1904-60957

KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™
MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR
DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE
DIRECTED TO:

©COPYRIGHT 2006 ALLTRADE TOOLS, LLC.
1431 VIA PLATA
LONG BEACH, CA 90810-1462 USA

840091 – 15" Floor Drill Press - Rev. 8/22/06

THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO
SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.

IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE
DEPARTMENT AT

1-800-590-3723

. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION

AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE
A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT: [email protected].
YOUR FEEDBACK IS VITAL TO US.

15" FLOOR DRILL PRESS

INSTRUCTION MANUAL

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Failure to; TABLE OF CONTENTS

USING THE DRILL PRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 DRILLING WOOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-30 DRILLING METAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-31 SECTION FOUR MAINTEN...

Page 4 - FIGURE 1. CONNECTING THE DRILL PRESS TO THE AC POWER RECEPTACLE

This drill press is equipped with a grounded 3-wire power cord with a 3-prong plug.If the power cord will not fit into the wall plug, an approved adapter can be used aslong as it is connected to the center screw in the wall plate. See Figure 1 and thesteps below to use an AC grounding adapter: 1. Re...

Page 5 - IMPORTANT SAFETY RULES FOR DRILL PRESSES

USE ONLY DRILL BITS, SANDING DRUMS, AND OTHER ACCESSORIES that are designed for the various speeds of this drill press. The drill bits, sandingdrums and other accessories should have a shank size 1/2" OR SMALLER. Unsuitable drill bits can break without warning throwing fragments outward athigh s...

Other Kawasaki Models

All Kawasaki Other