Kanto YU4MW - User Manual - manualsarea.com

Page 2 - Supporting your digital lifestyle; Important Safety Precautions

2 Supporting your digital lifestyle ™ Important Safety Precautions • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with a dry cloth. • Do not block any ventilation openings. Install in accordan...

Page 3 - Introduction; power supply and can be used worldwide from 110V AC to 240V AC.; Speaker

3 Introduction Thank you for choosing YU4 Powered Speakers, designed by Kanto in Canada. YU4 outputs 140W Peak power into 4 Ohm speakers, for remarkably bold and clean sound. Excellent sensitivity and frequency response provide deep thumping lows and clear, scintillating highs. YU4 is an amazingly f...

Page 4 - FRONT PANEL; ” Silk Dome Tweeter; REAR PANEL; Subwoofer Output; Volume/Input Select Knob

Right Channel Out OPT1 OPT2 Sub Out AUX L R RCA Serial Number ON OFF USB Charge 5V / 1A www.kantoaudio.com Designed in Canada Made in China RCA Phono Line GND FCC ID: IC: Front & Rear Panels FRONT PANEL 1 1” Silk Dome Tweeter 2 4” Kevlar ® Mid/Woofer Driver 3 LED White - Power on / Playback Mode...

Page 5 - Remote Control

5 AUX RCA OPT2 OPT1 BALANCE BASS TREBLE Remote Control 1 Standby Button - press to enter Standby Mode or return to Playback Mode 2 RCA Input Select 3 3.5 mm Stereo AUX Input Select 4 Optical 1 Input Select 5 Optical 2 Input Select 6 Bluetooth ® Input Select 7 Bluetooth ® Reset 8 Increase Volume 9 De...

Page 6 - Setting Up Your Speakers; devoted to achieving the optimum positions will be rewarded.; ATTENTION

6 Supporting your digital lifestyle ™ Setting Up Your Speakers The YU4 powered speaker system is designed for either bookshelf or stand mounting. The stands should be of rigid construction, between 26” to 32” high. We recommend the Kanto SP26 speaker stands to go with your YU4.The space between the ...

Page 7 - YU4 supports; Bluetooth; Stereo RCA to 3.5 mm stereo mini-jack ‘Y’ cable

7 Connecting Audio Sources Connecting a Turntable YU4 features a high quality DAC (digital-to-analog converter) for the optical inputs that supports data streams up to 24-bit/96 kHz resolution. YU4 supports Bluetooth 4.0 with Qualcomm® aptX™ technology. Use the appropriate audio cable to connect you...

Page 8 - be woken up manually by:; Connecting a Subwoofer; YURI; powered subwoofer with crossover and volume

8 Supporting your digital lifestyle ™ Auto Power-up / Auto Power-down The YU4 is designed to save power when not in use. When no audio signal has been detected for 15 minutes, the YU4 Amp will put itself into stand-by mode. If the audio signal returns via the same input that the YU4 was playing when...

Page 10 - Audio Troubleshooting Guide; Frequently asked questions about Kanto’s YU4 speakers.

10 Supporting your digital lifestyle ™ Audio Troubleshooting Guide Frequently asked questions about Kanto’s YU4 speakers. • Make sure the power cable is connected to the speaker and power outlet. • Ensure that the power outlet is providing power. • Verify that the power switch on the rear of the spe...

Page 11 - Specifications; Woofers; YU4 POWERED SPEAKER SYSTEM; The Bluetooth

11 Specifications Tweeters 1 inch Silk Dome Woofers 4 inch Kevlar® Nominal Impedance 4 Ohm Amplifier Type Class D Power Output 140 Watts Peak Input Sensitivity 560 mV Total Harmonic Distortion < 0.25% Crossover System 2-way Crossover Frequency 2.0 kHz Frequency Response 60Hz – 20kHz Inputs 1 x 3....

Page 12 - Warranty

18-A Warranty To learn more about all our audio products, visit www.kantoaudio.com Pour apprendre plus au sujet de tous nos produits audio, visitez www.kantoaudio.com Para aprender más sobre todos nuestros productos de audio, visite www.kantoaudio.com Kanto Audio kantoaudio @kantoaudio Kanto Living ...

Kanto YU4MW - User Manual

Table of Contents:

Summary

Other Kanto Speakers Models