Page 2 - CAUTION; Caution –– STANDBY/ON
Warnings, Cautions and Others Mises en garde, précautions et indications diverses CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet.2. Do not expose this appliance to rain or moisture. ATTENTION Afin d’éviter tout risque d’électrocution, d’incend...
Page 3 - Table of Contents
1 English English Table of Contents Introduction Page 2 Supplied accessories ..........................................................2Notes on handling ..............................................................3 Important cautions ..................................................................
Page 4 - Introduction
2 Introduction Introduction Supplied accessories • Audio/video cable (Yellow/White/Red) (x 1) • Component video cable (Red/Green/Blue) (x 1) • Audio cable (White/Red) (x 2) • Remote Control Unit (x 1) • AV compulink cable (x 1) • R6P(SUM-3)/AA(15F) battery (x 2) • AC power cord (x 1) • AC power plug...
Page 5 - In; Notes on handling; Important cautions; Copyright
Introduction 3 In troductio n English Notes on handling Installation of the unit • Select a place which is level, dry and neither too hot nor too cold (between 5 o C and 35 o C, 41 o F and 95 o F). • Leave sufficient distance between the unit and the TV.• Do not use the unit in a place subject to vi...
Page 6 - About discs; • Linear PCM; Playable disc types; ALL; Audio formats; Audio format
Introduction 4 Introduction About discs Playable disc types are as follows: The DVD Logo is a trademark. • CD-R and CD-RW discs recorded with the SVCD, Video CD, Audio CD, MP3 or JPEG format can be played back, though some may not be played back because of the disc characteristics or recording condi...
Page 7 - • High-resolution still image display; How to handle discs; Disc structure
Introduction 5 In troductio n English (For DVD AUDIO) A DVD AUDIO disc is comprised of “groups,” and each group is comprised of “tracks.” Some DVD AUDIO discs also contain a “bonus group” that can be played back by entering the “key number” (a kind of password). Usually the contents of a “bonus grou...
Page 8 - Getting started; Connection to a conventional TV; Before making any connections; NOTES; To connect to a TV
6 Getting started Getting started Connections *Before using the unit, you have to connect the unit to a TV and/or amplifier. • Do not connect the AC power cord until all other connections have been made.• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of t...
Page 9 - Gettin; Connection to a TV equipped with component jacks; • Connect “Y” to “Y,” “P
Getting started 7 Gettin g started English Connection to a TV equipped with component jacks You can enjoy high picture quality by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN jacks of your TV with the video cables. • Connect “Y” to “Y,” “P B ” to “P B ”(C B ), “P R ” to ...
Page 10 - Press and hold down VFP - PROGRESSIVE SCAN for a few seconds.; About SCANNING MODE; Source type of DVD VIDEO
Getting started 8 Getting started To make the Progressive scanning mode selection active from the remote control unit The unit supports the Progressive scanning system as well as the conventional Interlaced scanning system. If your television or monitor supports the progressive video input, you can ...
Page 11 - To connect to a stereo audio amplifier/receiver
Getting started 9 Gettin g started English You can enjoy high-quality audio by connecting the unit’s audio output to your amplifier or receiver.Connect the unit’s AUDIO OUT (LEFT/RIGHT) jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or receiver. The unit supports t...
Page 12 - To connect to a digital audio device; The unit; White
Getting started 10 Getting started You can enhance the sound quality by connecting either of the unit’s DIGITAL OUT jacks to the digital input of an amplifier, etc. by using an optical or a coaxial digital cable (optional). The digital audio signal from a disc is directly transferred. If you connect...
Page 14 - Using the remote control unit; Precautions for the safe use of batteries; • Operate the remote control unit while pointing it; Precaution; Remote sensor; NOTE
Getting started 12 Getting started Using the remote control unit Using the remote control unit, you can operate not only all the functions of the unit but also basic functions of your TV and amplifier/receiver. The battery compartment is located on the back of the remote control unit. 1 Press down o...
Page 15 - You can operate your TV from the remote control unit.; Manufacturer code list; buttons on the; Manufacturer
Getting started 13 Gettin g started English You can operate your TV from the remote control unit. Setting the remote control signal for operating your TV 1 Set the TV - DVD switch to “TV.” 2 Hold down TV/VIDEO - CANCEL until step 4 is finished. 3 Enter the manufacturer code of your TV listed below b...
Page 16 - Basic operations; Turning on/off the unit
14 B a sic opera ti o ns Basic operations In the following description, we assume that the buttons on the remote control unit are mainly used, however, you may use the corresponding buttons on the front panel if available. Before operation Press DVD STANDBY/ON on the remote control unit or press STA...
Page 17 - Basic oper; The initial setup before using the unit
Basic operations 15 Basic oper ati ons English We recommend you to set the display language, TV monitor type, analog audio output and digital output before using the unit, depending on circumstances, by following the procedure below.When turning on the unit for the first time, the DVD PLAYER SET UP ...
Page 18 - sic opera; DIGITAL AUDIO OUTPUT selection; Use
Basic operations 16 B a sic opera ti o ns 7 Press ENTER. The pull-down menu of the “DIGITAL AUDIO OUTPUT” appears. DIGITAL AUDIO OUTPUT selection 8 Use 5 / ∞ to select a desired digital output signal type. You must set this item correctly when you connect the unit to an external surround decoder or ...
Page 19 - Basic playback; Press; Inserting and removing discs
Basic operations 17 Basic oper ati ons English Basic playback This section describes basic operations for playback of DVD AUDIO, DVD VIDEO, SVCD, Video CD and Audio CD discs. For MP3 and JPEG disc playback, see the separate chapter on and after pages 47 and 51. 1 Press 0 OPEN/CLOSE to open the disc ...
Page 20 - The unit starts playback from the beginning.; The unit stops playback.; The unit pauses playback. To resume playback, press; To start playback; Icon; To stop playback completely
Basic operations 18 B a sic opera ti o ns Press 3 . The unit starts playback from the beginning. About screen saver function • A television monitor screen may be burned out if a static picture is displayed for a long time. To prevent this, the unit automatically activates the screen saver function i...
Page 21 - Resuming playback; During playback; When the resume mode is set to “DISC RESUME”; , the display window on the front
Basic operations 19 Basic oper ati ons English Resuming playback The unit can memorizes the position on a disc where you interrupt playback, and resume playback from that position later.There are two resume modes (DISC RESUME and ON) you can set on the preference display. See page 63 for details abo...
Page 22 - While stopped, or no disc is inserted; After loading the disc, press; When the resume mode is set to “ON”; then
Basic operations 20 B a sic opera ti o ns When the resume mode is set to “DISC RESUME” ¶ While stopped, or no disc is inserted 1 Press 0 OPEN/CLOSE to insert a disc whose interrupted position is memorized. After loading the disc, the display window on the front panel shows “----RESUME” and “RESUME S...
Page 23 - Variable speed playback; Method 1 (from the remote control unit only); To advance or reverse playback rapidly while monitoring; To advance a still picture frame-by-frame
Basic operations 21 Basic oper ati ons English Variable speed playback You can play back slowly or fast, or advance a picture frame by frame. ¶ During playback Method 1 (from the remote control unit only) Press 1 or ¡ . Each press of 1 or ¡ increases the playback speed. You can select the speed amon...
Page 24 - To locate the beginning of the scene or song; as many times as required.
Basic operations 22 B a sic opera ti o ns To locate the beginning of the scene or song You can locate the desired group or track (for DVD AUDIO), title or chapter (for DVD VIDEO), or track (for SVCD/Video CD/Audio CD) from which the unit starts playback. ¶ For DVD AUDIO/Audio CD: During playback or ...
Page 25 - During playback or while stopped; Use the numeric buttons to specify the number.; To locate a desired selection using the numeric buttons; Unit status
Basic operations 23 Basic oper ati ons English . ¶ For DVD AUDIO/DVD VIDEO/Audio CD: During playback or while stopped For SVCD/Video CD: During playback without PBC function or while stopped Use the numeric buttons to specify the number. Depending on the disc type and the unit status, what is specif...
Page 26 - Other convenient functions; To check the playback status; ANGLE
Basic operations 24 B a sic opera ti o ns Other convenient functions You can check the playback status, as well as change the brightness of the display window.Also, you can move back the playback position 10 seconds from the current position. You can see the current selection number (the group/track...
Page 27 - See page 42 for details about the menu bar.; You can dim the brightness of the display window.; To change the brightness of the display window
Basic operations 25 Basic oper ati ons English The indication on the right most of the status bar shows the unit's transport status as follows: Note that pressing ON SCREEN again brings up the menu bar under the status bar, from which you can access various functions. (Example of the menu bar for DV...
Page 28 - Advanced operations; Whenever a DVD AUDIO/DVD VIDEO disc is loaded; Press TOP MENU or MENU.; The menu appears on the TV screen.; The unit starts playback of the selected item.; When an SVCD/Video CD disc with PBC is stopped
26 Advanced operations Advanced operations This chapter describes operations for various advanced functions of DVD AUDIO, DVD VIDEO, SVCD, Video CD and Audio CD discs. For MP3 and JPEG disc playback, see the separate chapters on and after pages 47 and 51. Playing from a specific position on a disc Y...
Page 29 - Advance; To specify a desired title/group
Advanced operations 27 Advance d operations English 1 Press 3 or TOP MENU. A disc menu appears on the TV screen (the PBC function is activated). “ PBC “ is indicated in the display window on the front panel. 2 Use the numeric buttons to select the desired item. • To select a number between 1 and 10:...
Page 30 - Advanced; Press ON SCREEN twice.; The unit starts playback from the specified time.; • When you correct a mistake; TIME
Advanced operations 28 Advanced operations You can play a disc from the desired position by specifying the elapsed time from the beginning of the current group (for DVD AUDIO), the current title (for DVD VIDEO) or the disc (for SVCD/Video CD/Audio CD) using the time search function. Note that some D...
Page 32 - Use PAGE or; Each time you press PAGE or
Advanced operations 30 Advanced operations Most DVD AUDIO discs include still pictures, which usually appear in turn automatically during playback according to the playback sequence. However, there are other page(s) of the current still picture and you can change the picture (turn the page) manually...
Page 33 - While stopped
Advanced operations 31 Advance d operations English Changing the playback order You can play tracks on a DVD AUDIO, SVCD, Video CD or Audio CD in the desired order or in random order. By programming tracks, you can play up to 99 tracks in any order. You may program the same track more than once. ¶ W...
Page 35 - • To stop and quit random playback; Repeat playback; REPEAT
Advanced operations 33 Advance d operations English You can play tracks on a disc in random order by using the random function. ¶ While stopped 1 Press ON SCREEN twice. The menu bar appears on the TV screen.(See page 42 for details about the menu bar.) 2 Use 2 / 3 to move to . 3 Press ENTER. The uni...
Page 36 - ON SCREEN
Advanced operations 34 Advanced operations • To stop repeat playback Press 7 . When a DVD AUDIO, SVCD, Video CD or Audio CD disc is set, the unit stops playback but does not quit the repeat mode.When a DVD VIDEO disc is set, the unit stops playback and quits the repeat mode. • To quit repeat playbac...
Page 37 - The repeat icon shows; • To quit A-B repeat playback; Repeat icon
Advanced operations 35 Advance d operations English 4 Press ENTER at the beginning of the part you want to repeat (point A). The pull-down menu turns off.The repeat icon shows . 5 Press ENTER at the end of the part you want to repeat (point B). The repeat icon shows . The unit locates “A” and starts...
Page 38 - Use SUB TITLE or; Each time you press SUB TITLE or; Pressing SUB TITLE or; • For SVCD; cycles among those channels as; to select the; • For DVD AUDIO/DVD VIDEO; audio language or sound changes.
Advanced operations 36 Advanced operations 2 Use SUB TITLE or 5 / ∞ to select the subtitle. Each time you press SUB TITLE or 5 / ∞ , the subtitle language changes.See the following examples for subtitle selection. • For DVD AUDIO/DVD VIDEO Pressing SUB TITLE or 5 / ∞ cycles among the subtitles recor...
Page 39 - audio changes as follows.; From Angle selection window; Use ANGLE or; Each time you press ANGLE or
Advanced operations 37 Advance d operations English • For SVCD/Video CD Each time you press AUDIO-fs/Rate or 5 / ∞ , the playback audio changes as follows. 3 Press ENTER. You can hear the selected audio.The audio selection window is dismissed. You can enjoy a variety of scene angles if the DVD VIDEO...
Page 40 - From the angle list; • To return to the normal screen
Advanced operations 38 Advanced operations From the angle list ¶ During DVD VIDEO playback 1 Press and hold ANGLE for more than 1 second. Up to nine camera angles recorded on a disc appear on the TV screen. 2 Use 5 / ∞ / 2 / 3 to select the desired angle. 3 Press ENTER or 3 . The unit starts playbac...
Page 41 - During playback or while paused; Selected preset; NORMAL
Advanced operations 39 Advance d operations English ¶ During playback or while paused 1 Press ZOOM + or − . The unit zooms in by pressing ZOOM + or zooms out by pressing ZOOM − . Each time you press ZOOM +, the magnification is doubled (up to x 1024).Each time you press ZOOM − , the magnification is...
Page 42 - from the followings.; Selected parameter; The higher value enhances the effect.; Selected effect mode; D PHONIC
Advanced operations 40 Advanced operations 3 To define a user setting, select a parameter to be edited using 5 / ∞ from the followings. • GAMMA Controls the brightness of a shaded portion without changing the brightness of the entire picture. This control is optimum when you adjust the pictures of s...
Page 44 - Menu bar functions; When a disc is inserted; Press ON SCREEN again.; The selected icon is pointed by; To bring up the menu bar; Basic operation procedure
Advanced operations 42 Advanced operations Menu bar functions This section describes the functions you can perform via the menu bar.The available menu bar functions differ depending on the disc type. ¶ When a disc is inserted 1 Press ON SCREEN. The status bar, according to the disc type, appears on ...
Page 45 - Menu bar functions for DVD AUDIO; Selected Icon
Advanced operations 43 Advance d operations English Menu bar functions for DVD AUDIO Selected Icon Operation Note 1 Time mode selection (During playback only) Selects the time mode shown in the display window on the front panel and in the status bar. Press ENTER to select the time mode among the fol...
Page 46 - Menu bar functions for DVD VIDEO
Advanced operations 44 Advanced operations Selected Icon Operation Note 7 Audio selection (During playback only) Selects the audio language or sound. 1 Press ENTER to open the pull-down window.2 Use 5 / ∞ to select a desired audio language or sound. Example: 1/3 ENGLISH j 2/3 FRENCH j 3/3 SPANISH 3 ...
Page 47 - Menu bar functions for SVCD/Video CD/Audio CD
Advanced operations 45 Advance d operations English Selected Icon Operation Note 5 Audio selection (During playback only) Selects the audio language or sound. 1 Press ENTER to open the pull-down window.2 Use 5 / ∞ to select a desired audio language or sound. Example: 1/3 ENGLISH j 2/3 FRENCH j 3/3 S...
Page 49 - MP3 disc playback; Buttons
47 MP3 disc playback English English English MP3 disc playback The unit can play back MP3 files on a private CD-R/RW disc or commercial CD. We refer to a disc that contains MP3 file as an “MP3 disc” in this manual.Though available functions with MP3 discs are limited, operations for the available fu...
Page 50 - MP3 disc
MP3 disc playback 48 MP3 disc playback When loading an MP3 disc, after the disc contents are read, the MP3 CONTROL display automatically appears on the TV screen. You can specify the desired Group/Track from the display by the following procedure. ¶ When the MP3 CONTROL display is shown. 1 Make sure...
Page 51 - • To stop repeat playback; Direct selection; Function
MP3 disc playback 49 MP3 disc playback English English English You can select a desired Group directly by specifying the Group number. ¶ During playback or while stopped 1 Press TITLE/GROUP. “--” is shown in the Group display area of the display window. (Example for the indication of window) 2 Use t...
Page 52 - Bit rate
MP3 disc playback 50 MP3 disc playback You can check the sampling frequency and bit rate of digital audio during playback. ¶ During playback 1 Press and hold down AUDIO-fs/Rate for a few seconds. The sampling frequency and bit rate of the current digital audio are shown in the display window tempora...
Page 53 - JPEG disc playback; • A folder which has one or more files is regarded as a
51 JPEG disc playba ck English English English JPEG disc playback The unit can play back JPEG files on a private CD-R/RW disc. We refer to a disc that contains JPEG files as a “JPEG disc” in this manual.Note that, if a disc contains both of MP3 and JPEG files, you can only play back files of either ...
Page 54 - • To play back another picture:; To see a desired picture; JPEG
JPEG disc playback 52 JP EG di sc pla yback Basic operations When loading a JPEG disc, after the disc contents are read, the JPEG CONTROL display automatically appears on the TV screen. You can select a desired file for playback via this display. ¶ When the JPEG CONTROL display is shown 1 Make sure ...
Page 55 - During JPEG picture is shown on the TV screen; After inserting a JPEG disc
JPEG disc playback 53 JPEG disc playba ck English English English ¶ During JPEG picture is shown on the TV screen 1 Press ZOOM + or − . The unit zooms in by pressing ZOOM + or zooms out by pressing ZOOM − . Each time you press ZOOM +, the magnification is doubled (up to x 1024).Each time you press Z...
Page 56 - From the JPEG CONTROL display
JPEG disc playback 54 JP EG di sc pla yback From the JPEG CONTROL display ¶ During JPEG CONTROL display is shown 1 Make sure that the black (cursor) bar is in the left (Group) column. If it is in the right column, press 2 to move it to the left column. 2 Use 5 / ∞ to move the bar to a desired Group....
Page 57 - JPEG disc; While the JPEG control display is shown; • To quit repeat playback; Repeat function; Display; Repeat mode indicator
JPEG disc playback 55 JPEG disc playba ck English English English In the slide show mode, you can repeat playback of JPEG files in a Group or on the disc. ¶ While the JPEG control display is shown 1 Press REPEAT. Pressing REPEAT switches the repeat mode.If you press REPEAT while stopped, you need to...
Page 58 - Changing the initial settings; About the Preference display; • LANGUAGE; • OTHERS; How to set preferences
56 Changing the init ial s e tti ngs Changing the initial settings Selecting preferences This chapter refers to the settings which are already made when you purchase the unit. Read this section when you want to connect this machine to a wide-vision TV set or change the settings according to the envi...
Page 59 - LANGUAGE page; Menu items
Changing the initial settings 57 Changin g the in it ial se tti ngs English NOTES • To dismiss a preference display: Press CHOICE. • While an MP3 or JPEG disc is loaded, you cannot bring up any preference display. • When a preference display is shown on a wide TV screen, the upper and lower parts of...
Page 60 - Table of languages and their abbreviations
Changing the initial settings 58 Changing the init ial s e tti ngs Table of languages and their abbreviations AA Afar FA Persian KM Cambodian OM (Afan) Oromo SU Sundanese AB Abkhazian FI Finnish KN Kannada OR Oriya SV Swedish AF Afrikaans FJ Fiji KO Korean (KOR) PA Panjabi SW Swahili AM Ameharic FO ...
Page 61 - PICTURE page; MONITOR TYPE; • If you play back a “4:3” DVD VIDEO; PROGRESSIVE MODE; • When progressive scanning mode is; • FILM
Changing the initial settings 59 Changin g the in it ial se tti ngs English PICTURE page This page allows you to select desired options concerning with a picture or monitor screen. Menu items Setting options Notes/examples MONITOR TYPE You can select the monitor type to match your TV when you playba...
Page 62 - Digital output signal chart; The current picture gets dark.; AUDIO page; • When playing a DVD VIDEO or
Changing the initial settings 60 Changing the init ial s e tti ngs Digital output signal chart Menu items Setting options Notes/examples SCREEN SAVER You can select the screen saver function ON or OFF.See page 18 for details about screen saver function. • ON The current picture gets dark. • OFF The ...
Page 63 - ANALOG OUT; • This function does not work when; • MULTI CHANNEL; • This function works only when; • ON
Changing the initial settings 61 Changin g the in it ial se tti ngs English Menu items Setting options Notes/examples ANALOG OUT To play back a DVD VIDEO disc recorded with surround multichannel audio correctly, this setting must be properly made according to your audio system. • 2-CH DOLBY SURROUND...
Page 64 - Changing the; • The Dolby Digital LEF (Low; • EXPERT
Changing the initial settings 62 Changing the init ial s e tti ngs SPK.SETTING page This setting allows you to select desired options concerning with the speakers. Menu items Setting options Notes/examples MODE You can select the speaker configuration type according to your speaker systems. Normally...
Page 65 - OTHERS page
Changing the initial settings 63 Changin g the in it ial se tti ngs English OTHERS page This page allows you to select desired options concerning with the system. Menu items Setting options Notes/examples RESUME You can select the resume playback mode. • ON The unit can resume playback of the disc f...
Page 66 - BASS REDIRECT function; To set the speaker sizes
Changing the initial settings 64 Changing the init ial s e tti ngs Making fine tuning for your speakers You can make fine tuning to match your speaker system. This adjustment is available only when “ANALOG OUT” is set to “MULTI CHANNEL” in the “AUDIO” preference display and “MODE” is set to “EXPERT”...
Page 67 - • To return to the “SPK. SETTING” page; To generate test tone signals; To set the speaker level
Changing the initial settings 65 Changin g the in it ial se tti ngs English 1 Use 5 / ∞ to move to [DELAY] and press ENTER. The DELAY display page appears on the TV screen. points to [CENTER SPEAKER]. See page 56 for details about how to bring up the “SPK.SETTING” page. 2 Use 5 / ∞ to select the spe...
Page 69 - While; You can change the Parental Lock settings later.; moves to [COUNTRY CODE] if you enter the
Changing the initial settings 67 Changin g the in it ial se tti ngs English 5 While points to [SET LEVEL], press ENTER to bring up the pull-down menu. In the pull-down menu, “NONE” and level “1” through “8” are available.“NONE” does not restrict playback. Level “1” is the strictest level. Discs rate...
Page 70 - To select the item to be set, use
Changing the initial settings 68 Changing the init ial s e tti ngs 3 To change the “COUNTRY CODE” or “SET LEVEL”, press ENTER to bring up the associated pull-down menu while points the appropriate item. To select the item to be set, use 5 / ∞ when no pull- down menu is shown. 4 Use 5 / ∞ to select a...
Page 71 - Additional information; Refer to the corresponding pages indicated in () for details.; Front panel; Display windows (see the illustration below); Display window; Audio format indicators; Rear panel
69 Additional inf o rm at ion English Additional information Names of parts and controls Refer to the corresponding pages indicated in () for details. Front panel 1 STANDBY/ON button (14) 2 STANDBY/ON indicator (11, 14) 3 Disc tray (17, 19, 20) 4 0 OPEN/CLOSE button (17, 19, 20) 5 7 STOP button (18,...
Page 72 - Additional; Remote control unit; Numeric buttons
Additional information 70 Additional info rmat ion Remote control unit 1 OPEN/CLOSE button (17, 19, 20) 2 Numeric buttons 3 RETURN button (27) 4 PAGE button (30) 5 TOP MENU button (26) 6 Cursor selection ( 5 Up, ∞ Down) - CH (+/–) buttons (13) 7 Cursor selection ( 2 Left, 3 Right) - VOL (+/–) button...
Page 73 - AV COMPU LINK remote control system; Turn on the main power of the television.; Connection and setup; Notes for connection; Operation
Additional information 71 Additional inf o rm at ion English AV COMPU LINK remote control system The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest operation.If your video/audio player (such as a DVD player, CD player and VCR) and television or/and amplifier/receiver s...
Page 74 - Troubleshooting
Additional information 72 Additional info rmat ion Troubleshooting What appears to be a malfunction may not always be serious. Please go through the following list before requesting service. POWER Symptom Possible cause Remedy Power does not come on. Power plug is not inserted securely. Plug in secu...
Page 76 - Frequently Asked Questions; Question
Additional information 74 Additional info rmat ion Frequently Asked Questions Question Answer Ref. page Can I play back DVD VIDEO and Video CD purchased abroad? You can play back the DVD VIDEO discs with the Region Code (local code) containing “ALL” or “1” recorded in the NTSC or PAL system (PAL dis...
Page 77 - Specifications; General
Additional information 75 Additional inf o rm at ion English Specifications *Specifications and appearance subject to change without prior notice. General Readable discs: DVD AUDIO, DVD VIDEO, DVD-R (Video format), SVCD, Video CD, Audio CD (CD-DA), MP3 Format, JPEG, CD-R/RW (CD-DA, SVCD, Video CD, M...
Page 78 - Appendix A: Country/Area code list for Parental Lock
Additional information 76 Additional info rmat ion Appendix A: Country/Area code list for Parental Lock This list is used for the Parental Lock operation. For details, see page 66. AD Andorra AE United Arab Emirates AF Afghanistan AG Antigua and Barbuda AI Anguilla AL Albania AM Armenia AN Netherlan...
Page 79 - See “Sampling frequency.”
Additional information 77 Additional inf o rm at ion English Appendix B: Glossary 480i/480p Indicates the number of scanning lines and scanning format of an image signal. 480i indicates 480 scanning lines with interlace format, and 480p indicates 480 scanning lines with progressive format. Aspect ra...
Page 80 - The largest division on DVD VIDEO.
Additional information 78 Additional info rmat ion Letter box A type of picture playback with the normal (4:3) TV screen. Black bars are shown at the top and bottom of the image to allow playing of wide-screen (16:9) DVD movie without cutting off any sides of the image on a 4:3 TV. Linear PCM audio ...
Page 81 - Numerics
Additional information 79 Additional inf o rm at ion English Appendix C: Index Numerics 3D PHONIC ................................................................ 40, 41, 61480i............................................................................ 6, 7, 73, 75480p ................................
Page 82 - HOW TO LOCATE YOUR JVC SERVICE CENTER; Remember to retain your Bill of Sale for Warranty Service.; Do not service the television yourself; Accessories; Authorized Service Centers
BT-51005-5(0301) QUALITY SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER Dear Customer,In order to receive the most satisfaction from your purchase,please read the instruction booklet beforeoperating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearestauthoriz...
Page 83 - WHAT YOU MUST DO FOR WARRANTY SERVICE:
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA ANDIN COMMONWEALTH OF PUERTO RICO. WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner.Such repair and replacement servic...