JVC VR-N100U - Manual

VR-N100U USERS MANUAL Page 8 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 1.1. Manual Organization The VR-N100U User’s Manual documents the newest network security appliance. It features the new VR-N100U Security Technology on the VR-N100U industrial server board. It has be...

VR-N100U USERS MANUAL Page 10 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 2. INSTALLING VR-N100U This chapter covers all aspects for the VR-N100U installation, from the VR-N100U rackmount configuration to manually acquiring an IP address. Some of the procedures described h...

VR-N100U USERS MANUAL Page 11 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 2.3. VR-N100U Hardware Overview The VR-N100U comes preconfigured in a 19” 1U Rackmount enclosure. The embedded industrial server board with processor, heat sink, fan, memory, non-volatile flash disk ...

VR-N100U USERS MANUAL Page 12 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 2.3.2 Embedded Industrial Server The engine that runs the VR-N100U security appliance is based on the custom designed fourth generation embedded industrial server motherboard. The Intel-based process...

VR-N100U USERS MANUAL Page 13 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 Keypad Each key has a different function, illustrated by a directional arrow just above and to the left of the key. From left to right, the first key is the Up key. The next key is the Down key. The ...

VR-N100U USERS MANUAL Page 14 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 10/100 : The Network Speed LED will be either solid amber, or solid green. Amber indicates the LAN1 front channel network speed is 10 Mbps. Green indicates the LAN1 front channel network speed is 100...

VR-N100U USERS MANUAL Page 15 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 2.4. Installing VR-N100U on the Network BEFORE YOU BEGIN As the Installer and/or Administrator of the VR-N100U, you are assumed to have a working knowledge of TCP/IP and your network. Make sure you h...

VR-N100U USERS MANUAL Page 16 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 Also, you can utilize the Web Connect page to log into the VR-N100U to setup the IP address. Details regarding this is listed in section 3.4.2 Static IP Setup . You can now skip the following Methods...

VR-N100U USERS MANUAL Page 17 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 Each key has a different function, illustrated by a directional arrow just above and to the left of the key. Up Down Back Enter From left to right, the first key is the Up key. The next key is the Do...

VR-N100U USERS MANUAL Page 18 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 5. The next screen inquires if you want to Enable Static IP Setting and the other addresses you just entered. If you select the Y , the addresses will be saved. If you select the N , the option to ob...

VR-N100U USERS MANUAL Page 19 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 2. Reboot your workstation 3. Open your web browser 4. Type http://10.10.10.10 (remember, that’s VR-N100U’s assumed IP address) in the address/location field. NOTE: After you have finished configurin...

VR-N100U USERS MANUAL Page 20 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 3. Proceed to select the pertinent settings option and fill in the necessary information. At the very least, you need to change the IP address under Change the Static IP Address Settings link which w...

VR-N100U USERS MANUAL Page 21 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 2.4.5. Step 4: Setting Up the Backchannel Once VR-N100U has been successful installed onto your network, the next step is to configure the “back channel” (also referred as the camera or video channel...

VR-N100U USERS MANUAL Page 22 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 You can now proceed to connect the VR-N100U supported networked cameras to the backchannel switch. For a list of supported cameras, you can refer to section 5.2 Network IP Cameras for the latest upda...

VR-N100U USERS MANUAL Page 23 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 9. If all of the networked cameras are recognized and viewable by VR-N100U, you may power off each camera, disconnect their network cable, and proceed to install them into their permanent assigned lo...

VR-N100U USERS MANUAL Page 24 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 3. VR-N100U OVERVIEW This chapter describes the functionality and features of VR-N100U and how they are managed using the VR-N100U web browser interface. What makes managing IP cameras on a network p...

VR-N100U USERS MANUAL Page 25 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 3.1. Getting to the VR-N100U Web Browser Interface You can use any web browser, such as those from Microsoft IE or Netscape, to access the VR-N100U web browser interface. Use one of the following URL...

VR-N100U USERS MANUAL Page 26 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 3.2.1. Server Name Let’s have a look at the VR-N100U Setup Wizard. The first field displays the default name of the VR-N100U. Since this is the name by which the VR-N100U will be recognized on the ne...

VR-N100U USERS MANUAL Page 27 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 3.3. The Administration “System” Utilities Using your standard web browser or via the VDRView Web Connect, the VR-N100U administrator can easily and securely navigate to the various System Utilities ...

VR-N100U USERS MANUAL Page 29 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 If you want to change a user’s Full Name , VR-N100U Password , or admin rights, or assign the user to a group or remove the name from a group, click on the user’s name. Make your editing changes in t...

VR-N100U USERS MANUAL Page 30 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 3.3.4. Time Keeper The Time/Date page allows the administrator to easily change or setup the current Date, Time and specify the local time zone for the VR-N100U. It is very important to maintain the ...

VR-N100U USERS MANUAL Page 31 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 1. Select the Yes option from the drop-down Enable Alerts list when you are ready to activate Alerts. 2. Enter the IP address of your organization’s SMTP Server in the next field. 3. In the Recipient...

VR-N100U USERS MANUAL Page 32 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 3.4. The Administration “Networks” Utilities Proceed to select the Administration icon on the VR-N100U Toolbar to get back to the main Administration Utilities page. From there, select the Networks U...

VR-N100U USERS MANUAL Page 33 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 3.4.3. DHCP Server Option Your VR-N100U can also be configured as a DHCP Server to automatically distribute IP addresses to Windows clients that request them via LAN2. You have to assign your VR-N100...

VR-N100U USERS MANUAL Page 34 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 3.5. The Administration “Cameras” Utilities Proceed to select the Administration icon on the VR-N100U Toolbar to get back to the main Administration Utilities page. From there, select the Cameras Uti...

VR-N100U USERS MANUAL Page 35 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 If it was unavailable, then “Searching…” would be replaced with “No Recording Found for Specified Interval” message. If the video segment is found, then the first frame of the motion video would be a...

VR-N100U USERS MANUAL Page 36 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 3.5.2. Camera Views (2, 4, 8, 16) Each user may have their own preference in regards the simultaneous viewing of network cameras. Therefore, VR-N100U allows the user to select from a 2 camera, 4 came...

VR-N100U USERS MANUAL Page 38 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 use of a Preset setting programmed on the camera, creating/editing presets, and ability set the Auto-pan. These parameters and options may slightly differ based on the make and model of the PTZ camer...

VR-N100U USERS MANUAL Page 39 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 Configure Cameras that were not recognized by VR-N100U or did not exist will only display “Not Configured – please click ‘Configure’ below” on the center of the window. By clicking on the Configure l...

VR-N100U USERS MANUAL Page 40 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 3.5.4. Motion Log Network IP cameras are becoming more advanced, as some have incorporated motion detection support within the device. The advantage of motion detection is that it can allow you to be...

VR-N100U USERS MANUAL Page 41 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 VR-N100U will track each ISO image creation and store these log files (video clips) that can be easily accessed by clicking on the ISO Files button. This will display the list of available files crea...

VR-N100U USERS MANUAL Page 42 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 Viewer Level For administrators who wish to offer the minimum access to any camera, they would assign a user Viewer level security. This will allow the user to view those cameras which they have priv...

VR-N100U USERS MANUAL Page 43 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 3.6. VR-N100U’s Toolbar Most of this chapter has been about the features of VR-N100U that are managed by the utilities of the Administration Toolbox . The other icons are the Browse icon, the Search ...

VR-N100U USERS MANUAL Page 44 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 3.6.3. Appliances List Icon The Appliances List will allow you to bring up a list of all VR-N100U security appliances that are discovered over the network, whether locally on your LAN or remotely ove...

VR-N100U USERS MANUAL Page 45 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 4. MANAGING VR-N100U WITH VDRVIEW Overview: This chapter describes the features of the VDRView enterprise video application and how it can be used to manage thousands of VR-N100U security appliances ...

VR-N100U USERS MANUAL Page 47 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 4.3. Discovering VR-N100U Appliances When you start up VDRView, a splash screen appears. The splash screen stays up until VDRView discovers all the VR-N100Us on the same segment of the subnet as your...

VR-N100U USERS MANUAL Page 48 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 N100U security appliances are admin for both. During this process, the status of the authentication will be displayed at the bottom of the dialog box. 3. If the login is successful, proceed to click ...

VR-N100U USERS MANUAL Page 49 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 4.5. Definition of Toolbar Icons VDRView provides many toolbar icons to allow any user to easily navigate within this Enterprise Utility program for VR-N100U. The most frequently used functions are r...

VR-N100U USERS MANUAL Page 50 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 Reflash Firmware on Zerver… This icon allows the administrator to update the VR-N100U firmware by reflashing the firmware on the security appliance. This will open up the VR-N100U List dialog box fro...

VR-N100U USERS MANUAL Page 51 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 New View VDRView offers the ability to function as an unlimited “virtual” Multiplexer for all of the cameras. Within the Monitor Cameras page, you have the ability to create your own customized views...

VR-N100U USERS MANUAL Page 52 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 Edit/Delete View If you wish to edit or edit an existing view, simply click on this icon to open the list of saved views. Within this window, you can choose to remove any associated cameras from any ...

VR-N100U USERS MANUAL Page 53 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 From within this window, you can control the major functions of each individual camera similar to those within the VR-N100U page. When you select camera(s), the associated camera(s) within the view w...

VR-N100U USERS MANUAL Page 54 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 Back to Previous Page When utilizing the Web Connect page in VDRView, you are able to navigate directly within the VR-N100U web server to access the various Systems , Network and Cameras utility page...

VR-N100U USERS MANUAL Page 55 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 4.6. Definition of Menus Like most software application, VDRView provides pull-down menus for users to access various features and functions. This section will go into detail regarding all of the ava...

VR-N100U USERS MANUAL Page 56 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 4.6.3. VR-N100Us Under the VR-N100Us pull-down menu, functions related to the camera and recording are listed. Load Camera List This function is applicable to only the VR-N100Us , Monitor Cameras , a...

VR-N100U USERS MANUAL Page 57 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 4.6.4. Camera Views Camera Views commands are only available for use on the Monitor Cameras page. Please refer to the above section 4.5 Definition of Toolbar Icons where New View , Open View , Save (...

VR-N100U USERS MANUAL Page 58 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 Enable Discovery via Remote Server List… This is the second option that accommodates discovery of remote VR-N100Us. These VR-N100Us cannot be discovered by the conventional means of subnet broadcasti...

VR-N100U USERS MANUAL Page 59 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 1. To add or delete a remote Zerver, select Edit Remote Zerver List from the Options menu. 2. Click on the Add button to add an entry to the list. You will be prompted to provide either the name of t...

VR-N100U USERS MANUAL Page 60 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 Refresh (F5) Regardless of whether you utilize the Auto Refresh function, you can manually refresh the VDRView list by clicking on the F5 function key to discover VR-N100Us on the network. When a ref...

VR-N100U USERS MANUAL Page 61 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 4.7. Definition of Navigation Tabs In addition to the toolbar icon shortcuts, VDRView has organized the main utility pages using tabs. The following sections will describe in detail the available fea...

VR-N100U USERS MANUAL Page 62 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 NOTE: You can also log directly into VR-N100U via the web browser using the IP address or server name. 4.7.2. VR-N100Us Management and configuration of all cameras across VR-N100Us can be easily acco...

VR-N100U USERS MANUAL Page 63 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 Filter Camera List VDRView can also filter the camera list based on type (PTZ, MD or all) to make viewing the cameras easier for the user. Camera Status Legend A legend describing the camera informat...

VR-N100U USERS MANUAL Page 64 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 The editable fields are Camera Name , Video Storage (# of days) , and Frame Rate (fps) for all camera models while Angle Step , Zoom Step and Auto Pan Frequency apply only to PTZ type cameras. Once t...

VR-N100U USERS MANUAL Page 65 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 Once logged directly into the VR-N100U web server, close out the VR-N100U List dialog box and proceed to administer the VR-N100U. Refer to Chapter 3 VR-N100U Overview for details. 4.7.4. Monitor Came...

VR-N100U USERS MANUAL Page 66 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 4. On the left side of the page, click on Load Camera List button to open the Camera List dialog box. From within this window, you only need to drag-and-drop the cameras which you want to use for thi...

VR-N100U USERS MANUAL Page 67 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 identify/specify which camera is displayed on the larger preview window, enable or disable the auto switching, specify the time interval between the switching, as well as clear preview window. 7. Whe...

VR-N100U USERS MANUAL Page 68 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 2. Now locate the camera from which you want to search the archive on. You can do this by either double-clicking the camera from the camera list or inputting the camera name in the corresponding fiel...

VR-N100U USERS MANUAL Page 69 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 2. As you can see, a complete list of captured motion logs in chronological order is presented for that particular VR- N100U. A motion threshold level indicator is also presented for each motion log....

VR-N100U USERS MANUAL Page 70 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 3. Select the Browse button to open up a Choose File dialog box. Locate the VR-N100U .BIN firmware file that you downloaded from the web site, select the file and click on the Open button. If you sel...

VR-N100U USERS MANUAL Page 71 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 5. SUPPORTED DEVICES The following sections will provide information surrounding the various VR-N100U supported devices. 5.1. Hard Disk Drive Specifications VR-N100U supports onboard RAID to offer da...

VR-N100U USERS MANUAL Page 72 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 5.2. Network IP Cameras VR-N100U is designed to support the latest IP cameras from JVC. Unfortunately, each make as well as model utilizes different protocols, and offer slightly different features a...

VR-N100U USERS MANUAL Page 73 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 Advanced Settings for VN-C11U JVC VN-C11U Configuration (Fixed Motion Network Camera) Resolution 160x120, 320x240, 640x480 @ 160x120 Max 30 fps @ 320x240 Max 30 fps Frames per Second @ 640x480 Max 8 ...

VR-N100U USERS MANUAL Page 74 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 5.2.1. Testing Network IP Cameras If the network IP camera that you are using with VR-N100U is not being recognized or is not functioning correctly, please verify the following: 1. Is the network IP ...

VR-N100U USERS MANUAL Page 75 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 5.3. Network Enablers VR-N100U is designed to support the latest network enablers for analog cameras (a.k.a. video server or encoder devices) from major manufacturers. Unfortunately, each make as wel...

VR-N100U USERS MANUAL Page 76 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 5.4. Switches VR-N100U’s architecture allows the networked security appliance to be a completely non-evasive system. For the Backchannel (LAN2), a dedicated switch is utilized to enable up to 16 netw...

VR-N100U USERS MANUAL Page 77 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 6. TECHNICAL TIPS AND TROUBLESHOOTING This section is designated for trained technical personnel only. Do not attempt to make any changes unless you have been instructed by Technical Support personne...

VR-N100U USERS MANUAL Page 78 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 6.1.1. Processor Due to the optimized and multi-threaded Operating System that is installed on the industrial server board, VR-N100U is able to achieve fast performance utilizing Intel Socket 370 bas...

VR-N100U USERS MANUAL Page 79 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 NOTE1: “*” The default SCSI ID for the onboard Adaptec LVD160 Chipset is ID #7 with both Parity and Termination Enabled. NOTE2: Various SCSI devices can be daisy-chained on the SCSI bus, however the ...

VR-N100U USERS MANUAL Page 80 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 6.2. Jumper Settings The Industrial Server Board utilizes multiple default jumper settings for use with the VR-N100U security appliance and they are outlined in the following sections. 6.2.1. JP1: Fl...

VR-N100U USERS MANUAL Page 81 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 6.2.2. JP2: SCSI Termination Options Settings Disable 1-2: Short Enable 1-2: Open (default) For the onboard Adaptec LVD160 SCSI Termination to be enabled, both the JP2 must be OPEN (not jumpered) and...

VR-N100U USERS MANUAL Page 82 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 6.2.6. CN22: Software Reset Pin Signal 1 Reset 2 GND The software reset is a means to manually reset the appliance temporarily back to manufacturer’s default settings. NOTE: VR-N100U rackmount system...

VR-N100U USERS MANUAL Page 83 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 6.5. LED Panel with Keypad and LED Indicators The VR-N100U appliance is designed to utilize the LCD Display Panel, Keypad and LED Indicators. This LCD Display supports 2-lines of 16 alphanumeric char...

VR-N100U USERS MANUAL Page 85 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 10/100 The Network Speed LED will be either solid amber, or solid green. Amber indicates the LAN1 camera backchannel network speed is 10 Mbps. Green indicates the LAN1 camera backchannel network spee...

VR-N100U USERS MANUAL Page 88 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 7. GLOSSARY OF TERMS 10BaseT A version of Ethernet in which workstations are attached by twisted pair cable, the traditional cables used for telephone lines. 10BaseT uses star formation and transmits...

VR-N100U USERS MANUAL Page 89 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 CD burn Slang for the process of recording a CD-R, a CD-recordable medium. CD-R Compact Disc Recordable - A recordable CD-ROM, which can be read by normal CD-ROM drives. Data can be recorded once ont...

VR-N100U USERS MANUAL Page 90 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 network.org & a nonprofit organization. There has been a push recently to add more categories for classifying domains. Download To transfer data from a remote computer to your computer via a netw...

VR-N100U USERS MANUAL Page 91 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 FTP File Transfer Protocol - A high level protocol that supports file copying from one system to another over a TCP/IP connection. FTP requires client and server components. Gateway A program or piec...

VR-N100U USERS MANUAL Page 92 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 to different organizations, which distribute them to their users either dynamically or as permanently assigned IP addresses. IP operates the gateways that move data within an organization and to regi...

VR-N100U USERS MANUAL Page 93 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 backup browser. MIME Multipurpose Internet Mail Extension - MIME is used to extend the power of Web browsers to handle graphics, sound, video, etc. & anything but text. (HTML handles nothing but ...

VR-N100U USERS MANUAL Page 94 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 tools and effects available to Photoshop image editor in the Plug-ins folder. Power-on Sequence The software-driven, sequential initialization processes tracked by the light phases of the Status LED ...

VR-N100U USERS MANUAL Page 95 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 Socket A bidirectional pipe for incoming and outgoing data that allows an application program to access the TCP/IP protocols. Source Volume The CD/DVD volume that supplies attributes to a Target Volu...

VR-N100U USERS MANUAL Page 96 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 connection. URL Uniform (Universal) Resource Locator - A way of naming network resources, URLs are the Internet equivalent of street addresses. Like traditional addresses, they go from the general to...

VR-N100U USERS MANUAL Page 97 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 8. REGULATORY NOTICES, LICENSE AND WARRANTY 8.1. Limited Warranty For your benefit alone, that the product described in this manual will be free from defects in materials and workmanship for a period...

VR-N100U USERS MANUAL Page 98 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0 8.3. License Provisions This manual and the product described in it have been protected internationally by copyright and other applicable laws with all rights reserved. You may not remove or conceal ...