Page 2 - Cover 2; Warning; DO NOT cut off the mains plug from this equipment.; If in doubt — consult a competent electrician.; How to replace the fuse; Guidelines for safe operation
PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) Cover 2 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obt...
Page 3 - ENGLISH; WARNING
1 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) ENGLISH Thank you for buying this JVC colour television.To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING Always use the power cords which are supplied with the TV and receiver. Some ...
Page 4 - Do not view for long periods of time in the REGULAR mode (page 15).; If Burn-in has occurred
2 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) Burn-in A characteristic of Plasma Display Panels (PDPs) is that displaying the same image for a long time causes a part of the image to stay on the screen (this is called phosphor burn-in). Avoid burn-in as follows. Use the PICTURE SHIFT funct...
Page 5 - Pixel defects
3 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) ENGLISH Failure to heed the following precautions may result in damage to the TV or remote control. DO NOT block the TV’s ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may...
Page 6 - CONTENTS; Remote control buttons and
4 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) CONTENTS Checking contents of packages............5Setting up your TV..................................6 Installation ..........................................................6Putting the batteries into the Remote control .....6 Connections .......
Page 7 - Checking contents of packages; Power cord
5 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) ENGLISH Checking contents of packages Check that all components are present. Contact your retailer immediately if any components are missing. Power cord • One of the power cords below, suitable for your area, will be included with your TV. • Some...
Page 8 - Setting up your TV; If the TV falls, it will cause injuries and damage.; Installation; Warning for wall mounting unit:; Cautions for installation; Putting the batteries into the Remote control
6 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) Setting up your TV Be sure to have someone help you when you lift up the TV. The TV is too heavy to lift up by yourself. If the TV falls, it will cause injuries and damage. Installation Depending on the model, the TV may come with a wall mounti...
Page 9 - Connections; Caution; Connection diagram
7 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) ENGLISH Connections Caution • Turn off all equipment including the TV before connecting anything. Connection diagram DISPLAY OUT AUDIO OUT R L Pr R L Pb Y EXT- 3 S EXT- 1 EXT- 2 S EXT- 4 AC110-240V DISPLAY INPUT CONNECT TO SYSTEM CABLE AC INPUT11...
Page 10 - Connecting the TV and receiver; Disconnecting the system cable; Connecting the aerial and video; If you are connecting a VCR, follow; Back of the receiver
Connections 8 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) Connecting the TV and receiver Use the supplied system cable to connect the TV to the receiver. The two connectors are of different shapes.Ensure that the pins on connector 1 are oriented correctly, press the connector into the socket...
Page 11 - Connecting the power cord to the AC; Attaching the ferrite cores
9 Connections ENGLISH PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) Connecting the power cord to the AC outlet Insert the AC plugs on the power cords from the TV and receiver into AC outlets. Caution • Operate only from the power source specified (AC 110 – 240 V, 50/60 Hz) on the unit. • Failu...
Page 12 - Initial settings
10 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) Initial settings When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to make the initial settings. 1 Make sure you set the VCR/TV/DVD switch to the T...
Page 13 - Direct Rec
11 Initial settings ENGLISH PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) If “ACI START/ACI SKIP” appears in the AUTO PROGRAM menu: You can use the ACI (Automatic Channel Installation) function to decode the ACI data and complete the registration of all the TV channels quickly. For details of ...
Page 14 - TV buttons and functions
12 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) TV buttons and functions Refer to the pages in parentheses for details. 1 Remote control sensor 2 Power lamp (page 10) 3 MENU/OK button (pages 12, 20) 4 TV/AV button (page 12) 5 r (Volume) q buttons (page 12) 6 P p buttons (page 12) 7 A (Stand b...
Page 15 - Remote control buttons and functions; Turn the TV on or off from standby; Make sure you set the VCR/TV/DVD switch to; Choose a TV channel; Use the number buttons:
13 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) ENGLISH Remote control buttons and functions 1 Muting button 2 Number buttons 3 Information button 4 c button 5 3 sound button 6 b button 7 5 buttons 8 g (Text) button 9 p p buttons 0 VCR/DVD/Teletext control buttons - p buttons = Standby button...
Page 16 - Adjust the volume
Remote control buttons and functions 14 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) Use the PR LIST: 1 Press the h h h h (information) button to display the PR LIST Pressing the h (information) button changes the display as follows: 2 Press the 5 5 5 5 and 6 6 6 6 buttons to choose a progr...
Page 17 - ZOOM function; Choose the ZOOM mode; D SOUND function
15 Remote control buttons and functions ENGLISH PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) ZOOM function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes. AUTO: When a WSS (Wide Screen Signalling) signal, which shows ...
Page 18 - Displaying the current time
Remote control buttons and functions 16 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) Displaying the current time You can display the current time on the screen. Press the h h h h (information) button to display the current time Pressing the h (information) button changes the display as follow...
Page 19 - Using the MULTI-PICTURE function; To use
17 Remote control buttons and functions ENGLISH PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) Cancelling the PIP function: Press the R R R R button or b button. • If the main-picture signal is poor, the quality of the sub-picture may also be poor. • If the pictures have different standards, th...
Page 20 - Teletext function; Basic operation; Using the List Mode; To store the page numbers:; Hold
18 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) Teletext function Basic operation 1 Choose a TV channel with a teletext broadcast 2 Make sure you set the VCR/TV/DVD switch to the TV position. 3 Press g g g g (Text) button to display the teletext Pressing g (Text) button changes the mode as fo...
Page 21 - Reveal
19 Teletext function ENGLISH PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) Sub-page Some teletext pages include sub-pages that are automatically displayed. You can hold any sub-page, or view it at any time. 1 Choose a teletext page that includes sub-pages Sub-page numbers that can be viewed ar...
Page 22 - Using the TV’s menu
20 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) Using the TV’s menu This TV has a number of functions you can operate using menus. To use all your TV’s functions, you need to understand the basic menu operating techniques fully. Basic operation 1 Press the a a a a button to display the MENU (...
Page 23 - PICTURE SETTING; PICTURE MODE; To return to the default settings in each PICTURE
21 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) ENGLISH PICTURE SETTING Refer to “Using the TV’s menu” (see page 20) for details of displaying the menu. PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically. BRIGHT: Heightens contrast and sharpnes...
Page 24 - PICTURE FEATURES; DIGITAL VNR
22 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) PICTURE FEATURES Refer to “Using the TV’s menu” (see page 20) for details of displaying the menu. DIGITAL VNR The DIGITAL VNR function cuts down the amount of ‘noise’ (‘snow’ or interference) in the original picture. You can choose from the thre...
Page 25 - COLOUR SYSTEM
23 PICTURE FEATURES ENGLISH PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) COLOUR SYSTEM The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually. 1 Choose COLOUR SYSTEM. Then press the a a a a button The sub-menu of...
Page 27 - SOUND SETTING; Sound Adjustment
25 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) ENGLISH SOUND SETTING Refer to “Using the TV’s menu” (see page 20) for details of displaying the menu. STEREO / I • II When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (Sub I) or Bilingual II (Sub I...
Page 28 - HEADPHONE
SOUND SETTING 26 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) HEADPHONE You need to use the HEADPHONE menu to adjust the volume of the headphones. The HEADPHONE menu can also be used to set whether or not sound comes from the TV speakers when the headphones are being used and to perform the s...
Page 29 - EXT SETTING; ID LIST
27 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) ENGLISH EXT SETTING Refer to “Using the TV’s menu” (see page 20) for details of displaying the menu. S-IN (S-VIDEO input) You can connect a device (such as an S-VHS VCR) to enjoy the high-quality picture of the S-VIDEO signal (Y/C signal). Prepa...
Page 30 - Press the
EXT SETTING 28 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) 2 Press the 6 6 6 6 buttons to choose an EXT terminal or TV. Then press the a a a a button The arrow in the menu represents a signal flow. The left side of the arrow shows a signal source output from the EXT-2 terminal. EXT-1/EXT-3/E...
Page 31 - FEATURES; SLEEP TIMER; To set the CHILD LOCK function
29 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) ENGLISH FEATURES Refer to “Using the TV’s menu” (see page 20) for details of displaying the menu. SLEEP TIMER You can set the TV to automatically turn off after a specified period of time. 1 Choose SLEEP TIMER, then press the a a a a button A Su...
Page 32 - REFRESH
FEATURES 30 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) 3 Press the Number buttons to enter the ID number The lock is temporarily released so you can view the TV channel. If you have forgotten the ID number: Perform step 1 of “To set the CHILD LOCK function”. After confirming the ID number, ...
Page 33 - INSTALL; LANGUAGE; For users in the UK:
31 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) ENGLISH INSTALL Refer to “Using the TV’s menu” (see page 20) for details of displaying the menu. LANGUAGE You can choose the language you want to use for the on- screen display from the language list in a menu. 1 Choose LANGUAGE, then press the ...
Page 35 - INSERT
33 INSTALL ENGLISH PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) ID 1 Press the 6 6 6 6 buttons to choose a TV channel Every time you press the 6 buttons, the programme number (PR) changes and the picture of the TV channel stored in the programme number (PR) appears on the screen. 2 Press th...
Page 36 - DELETE
INSTALL 34 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) DELETE 1 Press the 6 6 6 6 buttons to choose a TV channel Every time you press the 6 buttons, the programme number (PR) changes and the picture of the TV channel stored in the programme number (PR) appears on the screen. 2 Press the ye...
Page 37 - Additional menu operations; Using the ACI function; Downloading data to a VCR
35 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) ENGLISH Additional menu operations Using the ACI function This TV has an ACI function which decodes the ACI (Automatic Channel Installation) data.Using the ACI function allows all TV channels transmitted from the cable TV station to be properly ...
Page 38 - Changing the COUNTRY setting
Additional menu operations 36 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) Changing the COUNTRY setting After the AUTO PROGRAM function is completed, you can change the country you have already set by using the AUTO PROGRAM function.When registering the TV channels for French broadcast statio...
Page 39 - Additional preparation; Connecting external equipment; Before connecting anything:
37 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) ENGLISH Additional preparation Connecting external equipment Connect the equipment to the TV, making the correct rear panel and front panel connections. Before connecting anything: • Read the manuals that came with the equipment. Depending on th...
Page 42 - Troubleshooting
40 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) Troubleshooting If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the mains plug is disconnected...
Page 43 - Other concerns
41 Troubleshooting ENGLISH PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) Other concerns • When the SLEEP TIMER function operates, the TV is automatically turned off. If the TV suddenly turns off, try to press the # (standby) button to turn on the TV once again. If the TV goes back to normal,...
Page 44 - Specifications; Design and specifications subject to change without notice.
42 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / English (EK) Specifications Design and specifications subject to change without notice. Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any commercial or demonstration purpose in public places (cafes, hotels, etc.) wit...
Page 45 - WARNHINWEISE FÜR DIE TISCHAUFSTELLUNG:; Empfohlene Abstände
1 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch DEU T SCH Vielen Dank für den Erwerb dieses Farbfernsehers von JVC.Um sicherzustellen, dass Sie Ihr neues Fernsehgerät richtig bedienen können, lesen Sie diese Anleitung sorgfältig, bevor Sie beginnen. ACHTUNG: Benutzen Sie immer die Netzkabel, die mi...
Page 47 - Fernbedienung zur Folge haben.; Blockieren Sie NICHT die Belüftungsöffnungen des Gerätes.; Pixelfehler
3 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch DEU T SCH Die Nichtbeachtung der folgenden Vorsichtsmaßnahmen kann Schäden am Gerät oder an der Fernbedienung zur Folge haben. Blockieren Sie NICHT die Belüftungsöffnungen des Gerätes. (Wenn die Belüftungsöffnungen durch Papier, Stoff usw. verschlosse...
Page 48 - INHALT; Die Tasten am Fernsehgerät und; Einschalten des Fernsehers aus dem; Tasten und Funktionen der; Ein- und Ausschalten des Fernsehers aus; Bedienung des Menüs des
4 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch INHALT Paketinhalt prüfen ..................................5Aufbau und Anschluss Ihres Fernsehgerätes ...................................6 Aufstellung .........................................................6Einsetzen der Batterien in die Fernbedien...
Page 49 - Paketinhalt prüfen; Netzkabel
5 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch DEU T SCH Paketinhalt prüfen Prüfen Sie, ob alle Komponenten vorhanden sind. Wenden Sie sich bitte sofort an Ihren Händler, falls Teile fehlen sollten. Netzkabel • Eines der unten abgebildeten und für die Gegend, in der Sie dieses Fernsehgerät gekauft...
Page 50 - Aufbau und Anschluss Ihres Fernsehgerätes; Aufstellung; WARNHINWEISE FÜR DIE WANDBEFESTIGUNGSEINHEIT:; Vorsichtsmaßnahmen vor der Aufstellung; Einsetzen der Batterien in die Fernbedienung
6 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch Aufbau und Anschluss Ihres Fernsehgerätes Heben Sie das Fernsehgerät nur mit mehr als 2 Personen hoch. Das Gerät ist für eine Person zu schwer und wenn es herunterfällt, können Verletzungen und Schäden die Folge sein. Aufstellung Je nach Modell wird...
Page 51 - Anschlüsse; Vorsicht; Anschlussbeispiel
7 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch DEU T SCH Anschlüsse Vorsicht • Schalten Sie alle beteiligten Geräte einschließlich des Fernsehers aus, bevor Sie irgendwelche Verbindungen herstellen. Anschlussbeispiel DISPLAY OUT AUDIO OUT R L Pr R L Pb Y EXT- 3 S EXT- 1 EXT- 2 S EXT- 4 AC110-240V ...
Page 52 - Anschließen von Fernseher und; Abziehen des Systemkabels; Anschließen von Antenne und; Wenn Sie keinen Videorekorder anschließen,; Rückseite des
Anschlüsse 8 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch Anschließen von Fernseher und Empfänger Benutzen Sie das beiliegende Systemkabel, um den Fernseher mit dem Empfänger zu verbinden.Die beiden Anschlüsse haben verschiedene Form.Achten Sie darauf, dass die Pins am Stecker 1 richtig ausgericht...
Page 53 - DEU; Anschließen des Netzkabels an der; Montage der Ferritkerne
9 Anschlüsse DEU T SCH PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch Anschließen des Netzkabels an der Netzsteckdose Stecken Sie die Netzstecker der Netzkabel von Fernseher und Empfänger in zwei geeignete Netzsteckdosen. Vorsicht • Betreiben Sie das Gerät nur an einem Netz mit der am Gerät angegebe...
Page 54 - Grundeinstellungen
10 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch Grundeinstellungen Wenn der Fernseher zum ersten Mal eingeschaltet wird, schaltet er in den Modus für die Grundeinstellungen, und das JVC-Logo wird angezeigt. Befolgen Sie die Anweisungen auf dem Bildschirm, um die Grundeinstellungen vorzunehmen. 1 A...
Page 55 - Herunterladen (Download) der Voreinstellungen
11 Grundeinstellungen DEU T SCH PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch Wenn “ACI START/ACI WEITER” im Menü AUTO erscheint: Sie können die Funktion ACI (Automatische Programmierung) verwenden, um die ACI-Daten zu dekodieren und die Registrierung aller Fernsehkanäle in kurzer Zeit zu beenden. ...
Page 56 - Die Tasten am Fernsehgerät und deren Funktionen
12 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch Die Tasten am Fernsehgerät und deren Funktionen Näheres erfahren Sie auf den in Klammern angegebenen Seiten. 1 Fernbedienungssensor 2 Netz-LED (Seite 10) 3 MENU/OK-Taste (Seiten 12, 20) 4 TV/AV-Taste (Seite 12 ) 5 r q Lautstärketasten (Volume) (Seite...
Page 57 - Tasten und Funktionen der Fernbedienung; Ein- und Ausschalten des Fernsehers; die Position TV zu stellen.; Fernsehsender wählen; Mit den Zifferntasten:
13 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch DEU T SCH Tasten und Funktionen der Fernbedienung 1 Stummschaltungstaste (Mute) 2 Ziffern-Tasten 3 Informationstaste 4 c -Taste 5 3 Ton-Taste 6 b -Taste 7 5 -Tasten 8 g (Text)-Taste 9 p p -Tasten 0 Bedienungstasten für VCR/DVD/Videotext - p -Tasten =...
Page 58 - Lautstärke einstellen
Tasten und Funktionen der Fernbedienung 14 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch Benutzen Sie PR LISTE: 1 Drücken Sie die Taste h h h h (Information) zur Anzeige der PR LISTE Wenn Sie die Taste h (Information) drücken, ändert sich die Anzeige wie folgt: 2 Drücken Sie die Tasten 5 5 5 5 un...
Page 59 - Wählen Sie den ZOOM-Modus
15 Tasten und Funktionen der Fernbedienung DEU T SCH PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch ZOOM-Funktion Sie können die Bildgröße entsprechend dem Bildseitenverhältnis einstellen. Wählen Sie aus den folgenden ZOOM Modi die Beste aus. AUTO: Wenn im Sendesignal oder im Signal eines externen G...
Page 60 - Anzeige der aktuellen Uhrzeit
Tasten und Funktionen der Fernbedienung 16 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch Anzeige der aktuellen Uhrzeit Sie können die aktuelle Uhrzeit auf dem Bildschirm darstellen lassen. Drücken Sie zur Anzeige der aktuellen Uhrzeit die Taste h h h h (Information) Wenn Sie die Taste h (Informatio...
Page 61 - oder DVD-Spielers von JVC; Verwenden der
17 Tasten und Funktionen der Fernbedienung DEU T SCH PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch Abbrechen der PIP-Funktion: Drücken Sie die R R R R - oder b -Taste. • Wenn das Bildsignal des Hauptbildes schlecht ist, ist die Bildqualität des Nebenbildes u.U. ebenfalls schlecht. • Wenn die Bilder...
Page 62 - Allgemeine Bedienung; Verwendung des Listenmodus; Seitennummern speichern:; Halten
18 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch Videotext-Funktion Allgemeine Bedienung 1 Wählen Sie einen Sender, der Videotext sendet 2 Achten Sie darauf, den VCR/TV/DVD-Schalter in die Position TV zu stellen. 3 Drücken Sie die Taste g g g g (Text), um den Videotext anzuzeigen Wenn Sie die Taste...
Page 63 - Aufdecken
19 Videotext-Funktion DEU T SCH PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch Unter-Seiten Einige Videotext-Seiten haben Unter-Seiten, die automatisch angezeigt werden. Sie können Unter-Seiten beliebig halten bzw. jederzeit betrachten. 1 Wählen Sie eine Videotextseite, die Unter- Seiten enthält Die...
Page 64 - Bedienung des Menüs des Fernsehers
20 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch Bedienung des Menüs des Fernsehers Dieses Gerät hat viele Funktionen, die per Menü bedient werden. Um alle Funktionen Ihres Fernsehers nutzen zu können, sollten Sie die grundsätzliche Menübedienung sicher beherrschen. Allgemeine Bedienung 1 Drücken S...
Page 65 - BILD EINSTELLUNG; Bildeinstellung; Aufrufen der Voreinstellungen jedes BILDEINST.:
21 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch DEU T SCH BILD EINSTELLUNG Lesen Sie “Bedienung des Menüs des Fernsehers” (siehe Seite 20) für Näheres zur Anzeige der Menüs. BILDEINST. Sie können einen von drei Bildmodi (BILDEINST.) auswählen, um die Bildeinstellungen automatisch einzustellen. HEL...
Page 66 - BILD VARIANTEN; Wählen Sie Super DigiPure
22 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch BILD VARIANTEN Lesen Sie “Bedienung des Menüs des Fernsehers” (siehe Seite 20) für Näheres zur Anzeige der Menüs. DIGITAL VNR Die Funktion DIGITAL VNR ist eine Funktion zum Verringern des Rauschens im Bild. Sie können zwischen drei verschiedenen Eins...
Page 67 - EMPFANGSSYSTEM
23 BILD VARIANTEN DEU T SCH PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch EMPFANGSSYSTEM Die Fernsehnorm (bzw. das Farbsystem) wird automatisch gewählt. Wenn das Bild jedoch nicht klar ist, oder keine Farbe erscheint, wählen Sie die Fernsehnorm von Hand. 1 Wählen Sie EMPFANGSSYSTEM. Drücken Sie dan...
Page 68 - PIP; Drücken Sie die Tasten; Wählen Sie mit den Tasten
BILD VARIANTEN 24 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch PIP Sie können eine von vier Positionen für das Nebenbild wählen. 1 Drücken Sie die Tasten 6 6 6 6 , um PIP zu wählen. Drücken Sie dann die Taste a a a a Das Menü PIP erscheint. 2 Wählen Sie mit den Tasten 5 5 5 5 einen Position aus. D...
Page 69 - SOUND EINSTELLUNG; Toneinstellungen
25 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch DEU T SCH SOUND EINSTELLUNG Lesen Sie “Bedienung des Menüs des Fernsehers” (siehe Seite 20) für Näheres zur Anzeige der Menüs. STEREO / I • II Wenn Sie eine zweisprachige Sendung (Zweikanalton) sehen, können Sie den Ton von Kanal I (Sub I) oder Kanal...
Page 70 - KOPFHÖRER
SOUND EINSTELLUNG 26 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch KOPFHÖRER Sie müssen das Menü KOPFHÖRER aufrufen, um die Kopfhörerlautstärke einstellen zu können. Im Menü KOPFHÖRER können Sie auch einstellen, ob der Ton aus den Lautsprechern kommen soll, wenn Kopfhörer angeschlossen werden, und ...
Page 71 - EXT EINSTELLUNG; ID LISTE
27 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch DEU T SCH EXT EINSTELLUNG Lesen Sie “Bedienung des Menüs des Fernsehers” (siehe Seite 20) für Näheres zur Anzeige der Menüs. S-IN (S-VIDEO-Eingang) Wenn Sie ein Gerät anschließen (z. B. einen S-VHS-Videorekorder), der ein S-VIDEO-Signal (Y/C-Signal) ...
Page 72 - Drücken Sie die Tasten
EXT EINSTELLUNG 28 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch 2 Drücken Sie die Tasten 6 6 6 6 , um eine EXT- Buchse oder TV zu wählen. Drücken Sie dann die Taste a a a a Der Pfeil im Menü stellt den Signalfluss dar. Das linke Ende des Pfeils gibt einen Signalquellenausgang der Buchse EXT-2 an. ...
Page 73 - FUNKTIONEN; Einstellen der Funktion KINDERSICHERUNG
29 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch DEU T SCH FUNKTIONEN Lesen Sie “Bedienung des Menüs des Fernsehers” (siehe Seite 20) für Näheres zur Anzeige der Menüs. SLEEP TIMER Sie können den Fernseher so einstellen, dass er sich nach einer bestimmten Zeit automatisch ausschaltet. 1 Wählen Sie ...
Page 75 - PROGRAMMIERUNG; SPRACHE
31 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch DEU T SCH PROGRAMMIERUNG Lesen Sie “Bedienung des Menüs des Fernsehers” (siehe Seite 20) für Näheres zur Anzeige der Menüs. SPRACHE Aus der Liste der Sprachen im Menü können Sie die Sprache wählen, in denen die Menüs und Dialoge auf dem Bildschirm er...
Page 76 - SENDER ORDNEN/MANUELL
PROGRAMMIERUNG 32 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch SENDER ORDNEN/MANUELL Die Funktionen SENDER ORDNEN/MANUELL sind in zwei Gruppen eingeteilt: Bearbeitung der aktuellen Programmnummern (PR) (SENDER ORDNEN-Funktionen) und manuelle Speicherung von Fernsehkanälen unter einer Programmnumme...
Page 77 - EINFÜGEN
33 PROGRAMMIERUNG DEU T SCH PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch ID 1 Wählen Sie mit den Tasten 6 6 6 6 einen Fernsehkanal Mit jedem Druck auf die Tasten 6 ändert sich die Programmnummer (PR) und das Bild des Senders mit dieser Programmnummer (PR) wird angezeigt. 2 Drücken Sie die rote T...
Page 78 - LÖSCHEN
PROGRAMMIERUNG 34 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch LÖSCHEN 1 Wählen Sie mit den Tasten 6 6 6 6 einen Fernsehkanal Mit jedem Druck auf die Tasten 6 ändert sich die Programmnummer (PR) und das Bild des Senders mit dieser Programmnummer (PR) wird angezeigt. 2 Löschen Sie den Fernsehkana...
Page 79 - Zusätzliche Menüfunktionen; Verwendung der ACI-Funktion; zum Videorekorder
35 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch DEU T SCH Zusätzliche Menüfunktionen Verwendung der ACI-Funktion Dieses Fernsehgerät hat eine ACI-Funktion, die ACI- (automatische Programmierung) Daten dekodiert.Mit der ACI-Funktion können alle Fernsehkanäle, die von Kabelfernsehsendern übertragen ...
Page 80 - Ändern der LAND-Einstellung
Zusätzliche Menüfunktionen 36 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch Ändern der LAND-Einstellung Nachdem die Funktion AUTO abgeschlossen ist, können Sie mit der Funktion AUTO das bereits eingestellte Land ändern.Beim Speichern von Fernsehkanälen für französische Sender (SECAM-L-System) führe...
Page 81 - Zusätzliche Vorbereitungen; Anschluss externer Geräte; Bevor Sie Verbindungen herstellen:; Rückseite des Empfängers
37 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch DEU T SCH Zusätzliche Vorbereitungen Anschluss externer Geräte Schließen Sie die Geräte unter Beachtung der folgenden Anschlussdiagramme an Ihrem Fernseher an. Bevor Sie Verbindungen herstellen: • Lesen Sie die Anleitungen aller beteiligten Geräte. A...
Page 82 - ausgeben können
Zusätzliche Vorbereitungen 38 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch Geräte, die das S-VIDEO-Signal (Y/C-Signal) z.B. von einem Videorekorder S-VHS ausgeben können Schließen Sie das Gerät an einen EXT-Anschluss (mit Ausnahme des EXT-1-Anschlusses) an.Sie können ein Video-Eingangssignal aus...
Page 84 - Problemlösungen
40 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch Problemlösungen Wenn bei der Benutzung Ihres Fernsehgerätes ein Problem auftreten sollte, lesen Sie bitte sorgfältig diese “Problemlösungen” durch, bevor Sie das Gerät in Reparatur geben. Eventuell können Sie das Problem leicht selbst beheben. Wenn z...
Page 85 - Verschiedenes
41 Problemlösungen DEU T SCH PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch Verschiedenes • Wenn die Funktion SLEEP TIMER aktiv ist, schaltet sich das Gerät automatisch aus. Wenn dies passiert, drücken Sie die Taste # (Standby), um den Fernseher wieder einzuschalten. Wenn sich das Gerät nun wieder...
Page 86 - Technische Daten
42 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Deutsch Technische Daten Das Design und die Technischen Daten können sich ohne Ankündigung ändern. Die Bilder, die mit Hilfe der Funktionen ZOOM auf diesem Fernsehgerät dargestellt werden, dürfen ohne Erlaubnis der Urheber des Originalbildmaterials nicht für...
Page 87 - FRANÇAIS; AVERTISSEMENT
1 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français FRANÇAIS Merci d’avoir fait l’acquisition de ce téléviseur couleurs JVC.Pour être certain que vous comprenez comment utiliser votre nouveau téléviseur, nous vous conseillons de lire attentivement le présent manuel avant de commencer. AVERTISSEMENT Ut...
Page 88 - N’utilisez pas le mode NORMAL (page 15) pour des périodes prolongées.; En cas de rémanence
2 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français Rémanence Une des caractéristique des écrans plasma (PDP) est que l’affichage prolongé d’une même image grave une partie de cette image à l’écran (c’est ce que l’on appelle la rémanence). Pour éviter la rémanence: Utilisez la fonction DECALAGE D’IM...
Page 89 - Points défectueux
3 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français FRANÇAIS Le non-respect des précautions suivantes peut être source d’endommagement du téléviseur ou de la télécommande. N’obstruez JAMAIS les ouvertures ou orifices d’aération du téléviseur. (Si ces ouvertures ou orifices de ventilation sont obstrués...
Page 90 - TABLE DES MATIERES; Vérification du contenu des; Raccordement des cordons d’alimentation; Touches de la télécommande et; Mise en et hors service de l’appareil à partir; Fonctions supplémentaires des
4 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français TABLE DES MATIERES Vérification du contenu des conditionnements ...............................5 Installation du téléviseur .......................6 Installation ..........................................................6Mise en place des piles dans ...
Page 91 - Vérification du contenu des conditionnements; Cordon d’alimentation
5 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français FRANÇAIS Vérification du contenu des conditionnements Vérifiez que tous les éléments sont bien présents. En cas d’absence d’un élément, veuillez prendre immédiatement contact avec votre distributeur. Cordon d’alimentation • Le cordon d’alimentation l...
Page 92 - Installation du téléviseur; ce manuel d’utilisation et installez le téléviseur correctement.; Précautions pour l’installation; Mise en place des piles dans la télécommande
6 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français Installation du téléviseur Prévoyez toujours plus de deux personnes pour soulever le téléviseur. Ne le soulevez pas tout seul ; le téléviseur est trop lourd et sa chute risque de provoquer des blessures et dommages. Installation Selon le modèle, le...
Page 93 - Raccordements; Attention; Schéma de raccordement
7 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français FRANÇAIS Raccordements Attention • Avant d’effectuer tout raccordement, mettez tous les équipements hors tension, y compris le téléviseur. Schéma de raccordement DISPLAY OUT AUDIO OUT R L Pr R L Pb Y EXT- 3 S EXT- 1 EXT- 2 S EXT- 4 AC110-240V DISPLAY...
Page 94 - Raccordement du téléviseur et du; Débranchement du câble système; Raccordement de l’antenne et du; Si vous ne raccordez pas de magnétoscope,; Arrière du récepteur
Raccordements 8 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français Raccordement du téléviseur et du récepteur Utilisez le câble système fourni pour raccorder le téléviseur au récepteur.Les deux connecteurs ont une forme différente.Vérifiez que les broches du connecteur 1 sont correctement orientées, en...
Page 95 - Raccordement des cordons; Fixation des noyaux en ferrite
9 Raccordements FRANÇAIS PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français Raccordement des cordons d’alimentation aux prises secteur Insérez les fiches des cordons d’alimentation du téléviseur et du récepteur dans les prises secteur. Attention • Ne raccordez les appareils qu’à la source d’alimentatio...
Page 96 - Réglages initiaux
10 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français Réglages initiaux A sa première mise sous tension, le téléviseur entre en mode de réglage initial et le logo JVC s’affiche. Suivez les instructions qui apparaissent à l’écran pour effectuer les réglages initiaux. 1 Veillez à régler le sélecteur VCR/...
Page 97 - Téléchargement des présélections
11 Réglages initiaux FRANÇAIS PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français Si “ACI DEPART/ACI SAUT” s’affiche dans le menu AUTO: Vous pouvez utiliser la fonction ACI (Installation automatique des canaux) pour décoder les données ACI et effectuer rapidement l’enregistrement de tous les canaux de t...
Page 98 - Touches et fonctions du téléviseur
12 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français Touches et fonctions du téléviseur Reportez-vous aux pages entre parenthèses pour plus d’informations. 1 Capteur de la télécommande 2 Témoin d’alimentation (page 10) 3 Touche MENU/OK (pages 12, 20) 4 Touche TV/AV (page 12) 5 Touches r (volume) q (pa...
Page 99 - Touches de la télécommande et leurs fonctions; Mise en et hors service de l’appareil à; Veillez à régler le sélecteur VCR/TV/DVD sur la; Sélection d’un canal TV
13 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français FRANÇAIS Touches de la télécommande et leurs fonctions 1 Touche de coupure du son 2 Touches numériques 3 Touche d’informations 4 Touche c 5 Touche son 3 6 Touche b 7 Touches 5 8 Touche g (Texte) 9 Touches p p 0 Touches de commande du VCR/DVD/télétex...
Page 100 - Réglage du volume
Touches de la télécommande et leurs fonctions 14 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français Utilisation de la LISTE PROG.: 1 Appuyez sur la touche h h h h (Informations) pour afficher la LISTE PROG. L’utilisation de la touche h (Informations) modifie l’affichage de la manière suivante: 2 Appu...
Page 101 - Fonction ZOOM; Sélection du mode ZOOM; Fonction SON 3D
15 Touches de la télécommande et leurs fonctions FRANÇAIS PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français Fonction ZOOM Vous pouvez modifier la taille de l’écran en fonction du format de l’image. Choisissez le réglage optimal parmi les modes ZOOM suivants. AUTO: Lorsqu’un signal WSS (Signal écran la...
Page 102 - Affichage de l’heure
Touches de la télécommande et leurs fonctions 16 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français Affichage de l’heure Vous pouvez afficher l’heure à l’écran. Appuyez sur la touche h h h h (Informations) pour afficher l’heure L’utilisation de la touche h (Informations) modifie l’affichage de la maniè...
Page 103 - Utilisation de la fonction IMAGES; Utilisation du bouton
17 Touches de la télécommande et leurs fonctions FRANÇAIS PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français Annulation de la fonction PIP: Appuyez sur la touche R R R R ou b . • Si le signal de l’image principale est de mauvaise qualité, l’image secondaire risque également d’être mauvaise. • Si les im...
Page 104 - Fonction télétexte; Fonctionnement de base; Utilisation du mode Liste; Pour mémoriser les numéros des pages:; Conserver l’affichage
18 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français Fonction télétexte Fonctionnement de base 1 Sélection d’un canal avec télétexte 2 Veillez à régler le sélecteur VCR/TV/DVD sur la position TV 3 Appuyez sur la touche g g g g (Texte) pour afficher le télétexte Appuyez sur la touche g (Texte) pour cha...
Page 105 - Page secondaire
19 Fonction télétexte FRANÇAIS PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français Page secondaire Certaines pages de télétexte comprennent des pages secondaires qui s’affichent automatiquement. Vous pouvez garder affichée toute page secondaire ou la visualiser à tout moment. 1 Sélectionnez une page de ...
Page 106 - Utilisation du menu du téléviseur
20 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français Utilisation du menu du téléviseur Ce téléviseur est équipé d’un certain nombre de fonctions que vous pouvez activer ou désactiver à l’aide de menus. Pour tirer le meilleur parti de toutes ses fonctions, il vous faut bien comprendre le fonctionnement...
Page 107 - REGLAGE IMAGE; MODE IMAGE; Pour revenir aux réglages par défaut dans chaque; TEINTE
21 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français FRANÇAIS REGLAGE IMAGE Reportez-vous à la section “Utilisation du menu du téléviseur” (voir page 20) pour plus de détails sur l’affichage du menu. MODE IMAGE Trois modes MODE IMAGE permettent d’effectuer automatiquement les réglages de l’image. LUMI...
Page 108 - OPTIONS IMAGE; Super DigiPure; Fonction de compensation de mouvement de
22 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français OPTIONS IMAGE Reportez-vous à la section “Utilisation du menu du téléviseur” (voir page 20) pour plus de détails sur l’affichage du menu. REDUC. BRUIT NUM. La fonction REDUC. BRUIT NUM. permet de réduire la quantité d’interférences apparaissant sur ...
Page 109 - SYSTEME COULEUR
23 OPTIONS IMAGE FRANÇAIS PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français SYSTEME COULEUR Le système couleurs est sélectionné automatiquement. Cependant, si l’image n’est pas nette ou si aucune couleur n’apparaît, vous devez sélectionner manuellement le système couleurs. 1 Sélectionnez SYSTEME COULE...
Page 111 - REGLAGE AUDIO; Réglage du son
25 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français FRANÇAIS REGLAGE AUDIO Reportez-vous à la section “Utilisation du menu du téléviseur” (voir page 20) pour plus de détails sur l’affichage du menu. STEREO / I • II Lorsque vous regardez une émission bilingue, vous pouvez sélectionner Bilingue I (menu...
Page 112 - CASQUE
REGLAGE AUDIO 26 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français CASQUE Pour régler le volume du casque d’écoute, utilisez le menu CASQUE. Le menu CASQUE permet également de décider si oui ou non les haut-parleurs du téléviseur doivent continuer à fonctionner lorsque l’on utilise le casque d’écoute,...
Page 113 - EXT REGLAGES; LISTE NOMS
27 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français FRANÇAIS EXT REGLAGES Reportez-vous à la section “Utilisation du menu du téléviseur” (voir page 20) pour plus de détails sur l’affichage du menu. S-IN (entrée S-VIDEO) Lors du raccordement d’un appareil (comme un magnétoscope S-VHS) qui permet l’émi...
Page 114 - Appuyez sur les touches
EXT REGLAGES 28 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français 2 Appuyez sur les touches 6 6 6 6 pour sélectionner une borne EXT ou TV. Appuyez ensuite sur la touche a a a a La flèche dans le menu représente le débit des signaux. Le côté gauche de la flèche indique la diffusion d’une source de sign...
Page 115 - OPTIONS; Pour régler la fonction VERROUILLAGE
29 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français FRANÇAIS OPTIONS Reportez-vous à la section “Utilisation du menu du téléviseur” (voir page 20) pour plus de détails sur l’affichage du menu. SLEEP TIMER Vous pouvez programmer le téléviseur pour qu’il s’éteigne automatiquement après un certain temps...
Page 116 - CREATEUR DE PIXELS
OPTIONS 30 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français 3 A l’aide des touches numériques, entrez le numéro ID Le verrouillage est provisoirement levé pour vous permettre de regarder le canal TV. Si vous avez oublié le numéro ID: Effectuez l’opération 1 de la procédure “Pour régler la fonction VE...
Page 117 - INSTALLATION; LANGAGE
31 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français FRANÇAIS INSTALLATION Reportez-vous à la section “Utilisation du menu du téléviseur” (voir page 20) pour plus de détails sur l’affichage du menu. LANGAGE Vous pouvez sélectionner la langue que vous souhaitez utiliser pour les messages à l’écran dans...
Page 119 - NOMS
33 INSTALLATION FRANÇAIS PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français NOMS 1 Appuyez sur les touches 6 6 6 6 pour sélectionner un canal TV Chaque fois que vous appuyez sur les touches 6 , le numéro de programme (PR) change et l’image du canal TV mémorisé sous ce numéro de programme (PR) apparaî...
Page 120 - EFFACER
INSTALLATION 34 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français EFFACER 1 Appuyez sur les touches 6 6 6 6 pour sélectionner un canal TV Chaque fois que vous appuyez sur les touches 6 , le numéro de programme (PR) change et l’image du canal TV mémorisé sous ce numéro de programme (PR) apparaît à l’...
Page 121 - Fonctions supplémentaires des menus; Utilisation de la fonction ACI; Téléchargement de données vers un
35 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français FRANÇAIS Fonctions supplémentaires des menus Utilisation de la fonction ACI Ce téléviseur possède une fonction ACI qui décode les données ACI (Installation automatique des canaux).La fonction ACI permet d’enregistrer correctement et rapidement tous ...
Page 122 - Modification du réglage PAYS
Fonctions supplémentaires des menus 36 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français Modification du réglage PAYS Une fois la fonction AUTO terminée, vous pouvez changer le pays que vous avez déjà configuré à l’aide de la fonction AUTO.Vous devez également effectuer cette opération pour changer de...
Page 123 - Autres préparatifs; Raccordement des appareils externes; Avant de raccorder tout appareil:
37 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français FRANÇAIS Autres préparatifs Raccordement des appareils externes Raccordez les appareils au téléviseur, en suivant attentivement les schémas de raccordement suivants. Avant de raccorder tout appareil: • Lisez les manuels fournis avec les appareils. E...
Page 126 - Guide de dépannage
40 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français Guide de dépannage En cas de problème pendant l’utilisation du téléviseur, veuillez lire attentivement ce “Guide de dépannage” avant de contacter le service technique. Vous pourrez probablement résoudre le problème par vous-même. Par exemple, si la ...
Page 127 - Autres problèmes
41 Guide de dépannage FRANÇAIS PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français Autres problèmes • Lorsque la fonction SLEEP TIMER est activée, le téléviseur se met automatiquement hors tension. Si le téléviseur s’éteint subitement, appuyez sur la touche # (veille) pour tenter de le rallumer. Si le...
Page 128 - Spécifications techniques
42 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / Français Spécifications techniques La conception et les spécifications sont sujettes à modifications sans avis préalable. Les images affichées à l’écran à l’aide des fonctions ZOOM de ce téléviseur ne peuvent pas être diffusées à des fins commerciales ou de ...
Page 131 - Cover 3
Cover 3 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / All cover LCT1440-001A-U_Cover.fm Page 4 Tuesday, August 5, 2003 10:15 AM
Page 132 - Cover 4
© 2003 VICTOR COMPANY OF JAPAN, LIMITED 5 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / All cover Cover 4 LCT1440-001A-U 0803-MK-CR-JMUK LCT1440-001A-U_Cover.fm Page 5 Tuesday, August 5, 2003 10:15 AM
Page 133 - Backbone
6 PD-42V31BUE/BJE/BSE / LCT1440-001A-U / All cover PD-42V31BUE/PD-42V31BJE/PD-42V31BSE Backbone PD-42V31BUE/BJE/BSE / LCT1440-001A-U / All cover LCT1440-001A-U_Cover.fm Page 6 Tuesday, August 5, 2003 10:15 AM