JVC LVT0142-006A - Manual

Table of Contents:

• Page 3 – English
• Page 4 – Table of Contents; TEXT COMPU LINK Remote Control System .. 26
• Page 5 – Parts Identification; Front Panel; button and STANDBY; To use the Cursor control buttons (; Remote Control
• Page 6 – Getting Started; Before Installation; General; Checking the Supplied Accessories; A. Using the Supplied FM Antenna; coaxial cable (the kind with a round wire going; FM Antenna; Connecting the FM and AM Antennas; FM Antenna Connections; Outside FM Antenna Cable
• Page 7 – AM Antenna Connections; Cut, twist and remove the insulation at the end of; Connecting the front speakers; terminals, and another pair to the FRONT; Connecting the rear and center speakers; Turn the loop until you have the best reception.; • Make sure the antenna conductors do not touch any other; Connecting the Speakers; • One subwoofer to enhance the bass.
• Page 8 – Connecting the subwoofer speaker; Connecting Audio/Video Components; Audio component connections; Cassette deck or MD recorder; the TEXT COMPU LINK remote control system.
• Page 9 – Video component connections; DVD player; • When you connect the DVD player with stereo output jacks:; ı Ç; • When you connect the DVD player with its analog discrete output; VCR
• Page 10 – Connecting the Power Cord; Plug the power cord into an AC outlet.; Putting Batteries in the Remote Control; Follow these precautions to avoid leaking or cracking cells:
• Page 11 – Basic Operations; Selecting the Source to Play; From the remote control:; Select the CD player.; • When you press one of the source selecting buttons on the remote; Selecting different sources for picture and sound
• Page 12 – Adjusting the Volume; Selecting the Front Speakers; On the front panel ONLY:; or; Listening only with headphones; Muting the Sound; From the remote control ONLY:; Recording a Source; Before recording, turn off the DVD MULTI playback mode.
• Page 13 – Attenuating the Input Signal; Reinforcing the Bass; The Bass Boost function affects the front speaker sounds only.; Adjusting the Tone
• Page 14 – Basic Settings; LARGE: Select this mode when the size of the center speaker; Rear Speaker Setting; Delay Time Setting; Changing the Source Name; – You cannot use the COMPU LINK remote control system (see page; Center Speaker Setting
• Page 15 – Press DELAY repeatedly until an appropriate delay time appears; Using the Sleep Timer; To cancel the Sleep Timer; • DVD MULTI playback mode settings (see page 20); To store the sound settings; The newly adjusted settings are memorized.; To recall the sound settings; • If the source is FM or AM, you can assign a different setting for; On the front panel
• Page 16 – Receiving Radio Broadcasts; Setting the AM Tuner Interval Spacing; Tuning in Stations Manually; • When you hold cursor control; Using Preset Tuning; To store the preset stations
• Page 17 – Selecting the FM Reception Mode; To tune in a preset station
• Page 18 – Using the DSP Modes; Early reflections; D THEATER: Reproduces the sound field of a large theater.; • JVC Theater Surround; DAP modes; select or adjust the DSP modes.
• Page 19 – Available DSP Modes According to the Speaker Arrangement; Available DSP modes
• Page 20 – Adjusting the 3D-PHONIC Modes
• Page 22 – Activating the DSP Modes; To cancel the DSP mode; DSP EFFECT 1
• Page 23 – Using the DVD MULTI Playback Mode; Activating the DVD MULTI Playback Mode
• Page 24 – Using the On-Screen Menus; • If your TV is not of the PAL color system, the TV screen will be; to move
• Page 25 – For DAP
• Page 26 – Adjusting the DVD MULTI Playback Mode
• Page 27 – Storing the Preset Stations; Not displayed when an AM station is selected.
• Page 28 – COMPU LINK Remote Control System; • To operate the cassette deck or MD recorder using the COMPU; Automatic Source Selection; When you press the play (; Turntable; Synchronized Recording; To use synchronized recording, follow these steps:; Put a tape in the cassette deck (or an MD in the; • During synchronized recording, the selected source cannot be
• Page 29 – TEXT COMPU LINK Remote Control System; If you have already plugged your CD player, MD; ) TEXT COMPU LINK jacks: Use the cables with the; Connect your CD player, MD recorder and this; CD player; Displaying the Disc Information on the TV screen; • If your audio component has two TEXT COMPU LINK jacks, you
• Page 30 – Note on; To exit from the Disc information screen:; • The on-screen display will disappear in the following case:; OPERATIONS; Make sure you have connected the CD player or; Showing the Disc Information on the TV
• Page 31 – Search a disc by its disc title:; Searching a Disc (Only for the CD player); Search a disc by its performer:
• Page 32 – Search a disc by its genre:; Entering the Disc Information; For the CD Player with the disc memory function:
• Page 33 – To insert a space, press
• Page 34 – Operating JVC’s Audio/Video Components
• Page 35 – Cassette deck
• Page 36 – Troubleshooting; PROBLEM
• Page 37 – Specifications; Amplifier
• Page 38 – PRECAUCIÓN