Page 2 - ENGLISH; IMPORTANT FOR LASER PRODUCTS; How to reset your unit
2 ENGLISH *Temperature inside the car.... If you have parked the car for a long time in hot orcold weather, wait until the temperature in the carbecomes normal before operating the unit. INFORMATION (For U.S.A.)This equipment has been tested and found to comply with the limits for a Class B digital ...
Page 3 - CONTENTS; How to use the MODE button
3 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS SOUND ADJUSTMENTS ................... 16 Selecting preset sound modes (C-EQ: custom equ...
Page 4 - LOCATION OF THE BUTTONS; Control panel; Display window
ENGLISH 4 LOCATION OF THE BUTTONS ; ∞ (down) button 1 (reverse) button Display window a Main display s EQ (equalizer) indicator d Sound mode (C-EQ: custom equalizer)indicatorsROCK, CLASSIC, POPS, HIP HOP, JAZZ,USER • also works as level meter during play if the level meter is activated (see page 19)...
Page 5 - Remote controller
ENGLISH 5 Remote controller 3 Selects the preset stations while listening tothe radio.Each time you press the button, the presetstation number increases, and the selectedstation is tuned in. 4 Selects the sound mode (C-EQ: customequalizer).Each time you press the button, the soundmode (C-EQ) changes...
Page 6 - Preparing the remote controller; Installing the battery
ENGLISH 6 Preparing the remote controller Before using the remote controller:• Aim the remote controller directly at the remote sensor on the main unit. Make sure there is noobstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting). Installing th...
Page 7 - BASIC OPERATIONS; Turning on the power; To drop the volume in a moment
7 ENGLISH BASIC OPERATIONS Turning on the power 1 Turn on the power. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not haveto press this button to turn on the power. 2 Select the source. To operate the tuner (FM or AM), see pages 10 –...
Page 8 - DEMO OFF
8 ENGLISH Canceling the displaydemonstration When shipped from the factory, displaydemonstration has been activated, and startsautomatically when no operations are done forabout 20 seconds.• It is recommended to cancel the display demonstration before you use the unit for thefirst time. To cancel th...
Page 9 - Setting the clock; Frequency
9 ENGLISH Setting the clock 1 Press and hold SEL (select) for morethan 2 seconds so that one of thePSM items appears on the display.(PSM: see page 19.) 2 Set the hour. 1 Select “CLOCK H” (hour) if not shown onthe display. 2 Adjust the hour. 3 Set the minute. 1 Select “CLOCK M” (minute). 2 Adjust the...
Page 10 - RADIO OPERATIONS; Listening to the radio; Start searching for a station.; Press and hold
10 ENGLISH RADIO OPERATIONS Listening to the radio You can use either automatic searching or manualsearching to tune in to a particular station. Searching for a station automatically:Auto search 1 Select the band (FM 1 – 3, AM). Each time you press thebutton, the band changes asfollows: Note: This r...
Page 11 - Storing stations in memory; FM station automatic preset: SSM
11 ENGLISH Storing stations in memory You can use one of the following two methods tostore broadcasting stations in memory.• Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM ...
Page 12 - Manual preset; Tuning in to a preset station
12 ENGLISH Manual preset You can preset up to 6 stations in each band(FM1, FM2, FM3, and AM) manually. Ex.: Storing FM station of 92.5 MHz into the preset number 1 of the FM1 band. 1 Select the band (FM1 – 3, AM) youwant to store FM stations into (inthis example, FM1). Each time you press thebutton,...
Page 13 - CD OPERATIONS; Playing a CD; Open the control panel.
13 ENGLISH CD OPERATIONS Playing a CD 1 Open the control panel. Note on One-Touch Operation: When a CD is already in the loading slot, pressingCD turns on the unit and starts playbackautomatically. 2 Insert a CD into the loading slot. The unit turns on, drawsthe CD and startsplayback automatically. ...
Page 14 - Selecting CD playback modes; To stop play and eject the CD; To fast-forward or reverse the track
14 ENGLISH Selecting CD playback modes To play back tracks at random(Disc Random Play) You can play back all tracks on the CD at random. 1 Press MODE to enter thefunctions mode while playing aCD. 2 Press RND (random), while“MODE” is still flashing on thedisplay, so that “DISC RND”appears on the disp...
Page 15 - Prohibiting CD ejection; While pressing CD, press and hold
15 ENGLISH Prohibiting CD ejection You can prohibit CD ejection and can lock a CDin the loading slot. While pressing CD, press and hold for more than 2 seconds. “NO EJECT” flashes on the display for about 5seconds, and the CD is locked and cannot beejected. To cancel the prohibition and unlock theCD...
Page 16 - SOUND ADJUSTMENTS; Select the sound mode you want.
16 ENGLISH SOUND ADJUSTMENTS Selecting preset sound modes(C-EQ: custom equalizer) You can select a preset sound mode (C-EQ:custom equalizer) suitable to the music genre. Select the sound mode you want. Each time you press thebutton, the sound modeschange as follows: Indication For: Preset values BAS...
Page 17 - Repeat steps; Adjusting the sound; Select the item you want to adjust.
17 ENGLISH 2 Adjust the setting. 3 Repeat steps 1 and 2 to adjust the other items. To reset each sound mode to the factorysettings, repeat the same procedure andreassign the preset values listed in the table onpage 16. To increase the level orturn on the loudness To decrease the level orturn off the...
Page 18 - OTHER MAIN FUNCTIONS; Basic Procedure; Adjust the PSM item selected.
18 ENGLISH OTHER MAIN FUNCTIONS Changing the general settings(PSM) You can change the items listed in the table onpage 19 by using the PSM (Preferred SettingMode) control. Basic Procedure 1 Press and hold SEL (select) for morethan 2 seconds so that one of thePSM items appears on the display.(See pag...
Page 20 - Detaching the control panel; Unlock the control panel.; Attaching the control panel
20 ENGLISH Detaching the control panel You can detach the control panel when leavingthe car.When detaching or attaching the control panel,be careful not to damage the connectors on theback of the control panel and on the panelholder. Detaching the control panel Before detaching the control panel, be...
Page 21 - TROUBLESHOOTING; Symptoms
21 ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a servicecenter. Symptoms • Sound cannot be heard from the speakers. • The unit does not work at all. • SSM (Strong-station Sequential Memory)automatic preset doesnot work. • Static...
Page 22 - MAINTENANCE; Handling discs; How to handle discs
22 ENGLISH MAINTENANCE Handling discs This unit has been designed to reproduce CDs,CD-Rs (Recordable), and CD-RWs (Rewritable).• This unit is not compatible with MP3 discs. How to handle discs When removing a discfrom its case, press down thecenter holder of the case and liftthe disc out, holding it...
Page 23 - SPECIFICATIONS; CD PLAYER SECTION
23 ENGLISH SPECIFICATIONS CD PLAYER SECTION Type: Compact disc playerSignal Detection System: Non-contact optical pickup (semiconductor laser) Number of channels: 2 channels (stereo)Frequency Response: 5 Hz to 20 000 HzDynamic Range: 96 dB Signal-to-Noise Ratio: 98 dBWow and Flutter: Less than measu...
Page 24 - Refer to page of How to Reset; USA ONLY; Visit us on-line for; Technical Support & Customer Satisfaction Survey.; US RESIDENTS ONLY
EN, SP, FR 1103KKSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! © 2003 VICTOR COMPANY OF JAPAN, LIMITED http://www. jvc m o bi le .c o m Visit us on-line for Technica...
Page 25 - Parts list for installation and connection; FRANÇAIS; sistemas eléctricos de masa NEGATIVA; Lista de piezas para instalación y conexión
KD-S30 Installation/Connection ManualManual de instalación/conexiónManuel d’installation/raccordement 1103KKSMDTJEINEN, SP, FR GET0174-002A [J] K Handles Manijas Poignées F Washer (ø5) Arandela (ø5) Rondelle (ø5) G Lock nut (M5) Tuerca de seguridad (M5) Ecrou d’arrêt (M5) I Mounting bolt (M5 x 20 mm...
Page 26 - Removing the unit
When installing the unit without using the sleeveInstalación de la unidad sin utilizar la mangaLors de l’installation de l’appareil scans utiliser de manchon In a Toyota for example, first remove the car radio and install the unit in its place. En un Toyota por ejemplo, primero retire la radio del a...
Page 27 - RACCORDEMENTS ELECTRIQUES; chasis del automóvil después de la instalación.
3 * 2 Before checking the operation of this unit prior toinstallation, this lead must be connected, otherwise powercannot be turned on. * 2 Antes de comprobar el funcionamiento de esta unidadprevia a de la instalación, es necesario conectar estecable, de lo contrario no se podrá conectar laalimentac...
Page 28 - the amplifier. Leave the speaker leads of this unit unused.
4 You can connect an amplifier to upgrade your car stereo system.• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlledthrough this unit. • Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker lead...
