Page 2 - ENGLISH; IMPORTANT FOR LASER PRODUCTS; How to reset your unit
2 ENGLISH INFORMATION (For U.S.A.)This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment...
Page 3 - CONTENTS
3 ENGLISH How to use the MODE (M) button: If you press MODE (M), the unit goes into functions mode and the number buttons work as differentfunction buttons. To use these buttons as number buttons again after pressing MODE (M), wait for 5 secondswithout pressing any number button until the functions ...
Page 4 - LOCATION OF THE BUTTONS; Control panel
4 ENGLISH LOCATION OF THE BUTTONS Control panel 1 2 3 4 6 9 p 8 5 7 E EQ u y t r e w q i o 2000 D- ; 1 (standby/on/attenuator) button 2 SEL (select) button 3 Control dial 4 Display window 5 Number buttons 6 4 / ¢ buttons 7 5 (up) button 8 0 (eject) button 9 ∞ (down) button p (control panel release) ...
Page 5 - Remote controller
5 ENGLISH Remote controller 1 • Turns on the unit if pressed when the unit is turned off. • Turns off the unit if pressed and held for a few seconds. • Drops the volume level in a moment if pressed briefly.Press again to resume the volume. 2 • Selects the band while listening to the radio. Each time...
Page 6 - Preparing the remote controller; Installing the battery
6 ENGLISH Preparing the remote controller Before using the remote controller:• Aim the remote controller directly at the remote sensor on the main unit. Make sure there is noobstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting). Installing th...
Page 7 - BASIC OPERATIONS; Turning on the power; To drop the volume in a moment
7 ENGLISH BASIC OPERATIONS Turning on the power 1 Turn on the power. Note on One-Touch Operation: When you select a source in step 2 below, thepower automatically comes on. You do not haveto press this button to turn on the power. 2 Select the source. To operate the tuner (FM or AM), see pages 9 – 1...
Page 8 - Changing the display pattern
8 ENGLISH Changing the display pattern You can change the display pattern.The number of the selectable display patternsvaries according to the playback sources.However, the unit basically provides three maindisplay patterns for each source, and once one ofthese three patterns is selected, the samepa...
Page 9 - RADIO OPERATIONS; AM; Listening to the radio; Start searching a station.
9 ENGLISH RADIO OPERATIONS 2000 D- FM1 FM2 FM3 AM Listening to the radio You can use either automatic searching or manualsearching to tune in to a particular station. Searching a station automatically:Auto search 1 Select the band (FM1 – 3, AM). Note: This receiver has three FM bands (FM1, FM2,FM3)....
Page 10 - Press and hold
10 ENGLISH If the sound quality decreases and thestereo effect is lost while listening to anFM stationIn some areas, adjacent stations mayinterfere with each other. If this interferenceoccurs, this unit can automatically reduce thisinterference noise (the initial setting whenshipped from the factory...
Page 11 - Manual preset; Storing stations in memory; FM station automatic preset: SSM
11 ENGLISH Manual preset You can preset up to 6 stations in each band (FM1,FM2, FM3 and AM) manually. Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band. 1 Select the band (FM1 – 3, AM) youwant to store stations into (in thisexample, FM1). Each time you press thebutton, ...
Page 12 - Tuning in to a preset station; Selecting a preset station directly
12 ENGLISH Tuning in to a preset station You can easily tune in to a preset station.Remember that you must store stations first. If youhave not stored them yet, see “Storing stations inmemory” on page 11. Selecting a preset station directly 1 Select the band (FM1 – 3, AM). 2 Select the number (1 – 6...
Page 14 - CD OPERATIONS; To stop play and eject the disc; Playing a CD; Open the control panel.
14 ENGLISH CD OPERATIONS 2000 D- Notes: • When a disc is already in the loading slot, selecting “CD” as the source starts CD play. • When a disc is inserted upside down, the disc automatically ejects (if the control panel is open). Ifthe control panel is closed, “Please Eject” appears. • If you chan...
Page 15 - Selecting CD playback modes; To play back tracks at random (Random Play)
15 ENGLISH Locating a track or a particularportion on a CD To fast-forward or reverse the track To go to the next or previous tracks Press and hold ¢ , while playing a disc, tofast-forward the track. Press and hold 4 , while playing a disc, toreverse the track. Press ¢ briefly, while playing a disc,...
Page 16 - Prohibiting CD ejection; for more than 2 seconds.
16 ENGLISH To play back tracks repeatedly (Repeat Play) You can play back the current track repeatedly. 1 Press MODE (M) to enter thefunctions mode while playing adisc.“Mode” appears on the display. 2 Press RPT (repeat), while“Mode” is still on the display, sothat the RPT indicator ishighlighted on ...
Page 18 - MP3 INTRODUCTION; Compatible with ID3v1
18 ENGLISH MP3 INTRODUCTION How are MP3 files recordedand played back? MP3 “files (tracks)” can be recorded in“directories (folders)”—in PC terminology.During recording, the files and directories can bearranged in a way similar to arranging files anddirectories/folders of computer data.“Root” is sim...
Page 19 - MP3 directory/file configuration; MP3 playback/search order
19 ENGLISH MP3 directory/file configuration 13 12 18 19 17 23 22 24 11 10 21 20 1 2 5 6 3 4 02 04 ROOT 15 16 14 06 07 05 09 01 08 7 8 9 03 Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Hierarchy : Root : Directories : MP3 files 01 ROOT MP3 playback/search order • The numbers in circles below the M...
Page 20 - MP3 OPERATIONS; Playing an MP3 disc
20 ENGLISH MP3 OPERATIONS 2000 D- Refer also to “CD OPERATIONS” on pages 14to 17. Playing an MP3 disc 1 Open the control panel. 2 Insert an MP3 disc into the loading slot. The unit draws thedisc. Playback startsautomatically from thefirst file of the firstdirectory once disccheck is completed. 3 Clo...
Page 21 - Selecting a directory; To go to a particular directory directly; To skip to the next or previous files
21 ENGLISH To stop play and eject the disc Press 0 . Playback stops, the control panel moves down,and the disc automatically ejects from the loadingslot. Locating a file or particularportion on an MP3 disc To fast-forward or reverse the file Selecting a directory You can select a directory or skip t...
Page 22 - To skip to the previous directory; Selecting MP3 playback modes; To play back files at random (Random Play); Random 1
22 ENGLISH To skip to the next directory Press 5 (up) briefly while playing an MP3 disc.Each time you press the buttonconsecutively, the next directoryis located (and the first file inthe directory starts playing, ifrecorded). (See “MP3playback/search order” onpage 19.) To skip to the previous direc...
Page 23 - Repeat 1; Intro 1
23 ENGLISH Random Highlighted All files of the current 1 directory, then the files ofthe next directory and soon. Random Flashes All files on the disc. 2 When Random Play is turned on, the RANDOMindicator lights up or flashes on the display. To play back files repeatedly (Repeat Play) You can play b...
Page 25 - SOUND ADJUSTMENTS; Adjusting the sound; Select the item you want to adjust.; Vol Adj
25 ENGLISH SOUND ADJUSTMENTS 2 Adjust the level. While adjusting fader and balance—Fad, Bal:You can make these two adjustments at thesame time, by referring to the indication onthe display. • Press 5 or ∞ to adjust the fader. • Press ¢ or 4 to adjust the balance. While adjusting subwoofer output—Sub...
Page 26 - Select the sound mode you want.; Enter the sound adjustment mode.
26 ENGLISH Selecting preset sound modes(iEQ: i-equalizer) You can select a preset sound mode suitable tothe music genre.• There is a time limit in doing the following procedure. If the setting is canceled before youfinish, start from step 1 again. 1 Press EQ (equalizer). The last selected sound mode...
Page 27 - Sound adjustment items
27 ENGLISH 6 Select one of the user sound modes(User 1, User 2, User 3). 7 Store the adjustment in the selecteduser sound mode. 4 Make adjustments as you like,referring to the table “Soundadjustment items.” 1) Press ¢ or 4 to select the frequency band—Low, Mid,or High. 2) Turn the control dial to se...
Page 28 - Activating the level meter; Level 1
28 ENGLISH Activating the level meter You can show the level meters on the displaywhile playing any source. This unit is equippedwith three level meter patterns.• There is a time limit in doing the following procedure. If the setting is canceled before youfinish, start from step 1 again. 1 Press EQ ...
Page 29 - OTHER MAIN FUNCTIONS; Adjust the PSM item selected.; To set clock—; Basic Procedure
29 ENGLISH OTHER MAIN FUNCTIONS 4 Adjust the PSM item selected. 5 Repeat steps 2 to 4 to adjust the otherPSM items if necessary. 6 Finish the setting. To set clock— Clock Hr, Clock Min You can set the clock using the PSM control. 1 Press and hold SEL (select) for more than 2seconds so that one of th...
Page 32 - IF Filter; Changing the display color
32 ENGLISH To change the FM tuner selectivity— IF Filter In some areas, adjacent stations may interferewith each other. If this interference occurs, noisemay be heard. • Auto: When this type of interference occurs,this unit automatically increases thetuner selectivity so that interferencenoise will ...
Page 33 - Enter the color selecting mode.
33 ENGLISH 7 Enter the color selecting mode. 8 Select the display color. As you turn the control dial, the colorschange as follows: Every * 1 O Aqua O Sky O Sea O Leaves O Grass O Rose O Cherry O Orange O Honey O Violet O Grape O Snow O User * 2 O (back to the beginning) * 1 When you select “Every,”...
Page 34 - Red
34 ENGLISH Selecting or adjusting your own color—User You can adjust and store your own colors—“Day”and “Night,” and select one of them as thedisplay color for any desired source.• Day: Can be used as your user color duringthe day time (while the headlights areturned off). • Night: Can be used as yo...
Page 35 - To erase the entered characters; Assigning names to the sources
35 ENGLISH 4 Select a character. • About the available characters, see page 45. 5 Move the cursor to the next(or previous) character position. 6 Repeat steps 3 to 5 until you finishentering the name. 7 Finish the procedure while the lastselected character is flashing. To erase the entered characters...
Page 36 - Attaching the control panel; Detaching the control panel; Unlock the control panel.
36 ENGLISH Attaching the control panel 1 Insert the right side of the control panelinto the groove on the panel holder. 2 Press the left side of the control panelto fix it to the panel holder. Note on cleaning the connectors: If you frequently detach the control panel, theconnectors will deteriorate...
Page 37 - CD CHANGER OPERATIONS; Playing CDs; CD
37 ENGLISH CD CHANGER OPERATIONS We recommend that you use one of the CH-X serieswith your unit.If you have another JVC CD automatic changer,consult your JVC car audio dealer for connections. • For example, if your CD automatic changer is one of the KD-MK series, you need a cord (KS-U15K) forconnect...
Page 38 - Selecting a disc; To go to a particular disc directly
38 ENGLISH Selecting a disc To go to a particular disc directly Press the number button corresponding to thedisc number to start its playback (while the CDchanger is playing). • To select a disc number from 1 – 6: Press 1 (7) – 6 (12) briefly. • To select a disc number from 7 – 12: Press and hold 1 ...
Page 39 - While playing a CD, press and hold
39 ENGLISH To select a disc using the disc lists If you forget what discs are loaded in the CDchanger, you can show the disc title list andselect a disc on the list shown on the display.• The display can show only six disc names at a time. 1 While playing a CD, press and hold 5 (up) or ∞ (down) unti...
Page 40 - To play back tracks repeatedly (Repeat Play)
40 ENGLISH To play back only intros (Intro Scan) You can play back the first 15 seconds of eachtrack sequentially. 1 Press MODE (M) to enter thefunctions mode while playing adisc.“Mode” appears on the display. 2 Press INT (intro), while “Mode” isstill on the display, so that the INTindicator is high...
Page 41 - EXTERNAL COMPONENT OPERATIONS; Playing an external component
41 ENGLISH EXTERNAL COMPONENT OPERATIONS Aux input Playing an external component You can connect the external component to the CDchanger jack on the rear using the Line Input AdaptorKS-U57 (not supplied). Preparations: • For connecting the Line Input Adaptor KS-U57 and the external component, refer ...
Page 42 - TROUBLESHOOTING
42 ENGLISH What appears to be trouble is not always serious. Check the following points before calling a servicecenter. TROUBLESHOOTING Remedies Stop playback while driving onrough roads. Change the disc. Check the cords andconnections. Adjust it to the optimum level. Check the cords andconnections....
Page 44 - MAINTENANCE; Handling CDs; How to handle discs; To keep discs clean
44 ENGLISH MAINTENANCE Handling CDs This unit has been designed to reproduce CDsand CD-Rs.• You can also play back CD Text.• You can also play back your original CD-Rs (Recordable) and CD-RWs (Rewritable) eitherin audio CD format or MP3 format. How to handle discs When removing a disc fromits case, ...
Page 45 - SPECIFICATIONS; GENERAL; AUDIO AMPLIFIER SECTION; Available characters
45 ENGLISH SPECIFICATIONS GENERAL Power Requirement: Operating Voltage: DC 14.4 V (11 V to 16 V allowance) Grounding System: Negative groundAllowable Operating Temperature: 0°C to +40°C (32°F to 104°F) Dimensions (W × H × D): Installation Size: 182 mm × 52 mm × 150 mm (7-3/16" x 2-1/16" x 6-...
Page 46 - Having TROUBLE with operation?; Refer to page of How to Reset; USA ONLY; Visit us on-line for; US RESIDENTS ONLY
0302MNMMDWJEIN J V C EN, SP, FR VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! http://www. jvc m o bi le .c o m Visit us on-line for Technical...
